Nortel Modular Ics 5.0 System Coordinator Guide

							Answering calls /61
P0941565 02 Modular ICS 5.0 System Coordinator Guide

 
  	    
 	  
 	     

 1 	   	 	 $3  
	
$ *
²¥¥ÛßßÜÝÝ
= *
ÛÜßÝß4 
 	
  1  6
	
	
5
3 *­	
   	
   

  	  	
9 *­
@ *Ô 
0 6 	   4
  5 	HF answerback: 
CHANGE

Turning Privacy on or off for a call
²¡Ü
A    	  
  	 		
	 - 	 
   	
  	 	 
 
 	
   
 	   	

 
  
  - 	
  	
  	

   	 	  	   

* 	 
 	  
   	
    	


& 	 
  	 	

 		  
	

 	 	  	
 	 	 		   	 

	

 	  	 	

     	
 
						

							62/ Answering calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
Creating a conference by releasing privacy
- 	 
  	
  	  	  	 
 	
 
  	    	 
    
	 	
  	  (

  
 	
	
 
	  	
 !   
  
   	

  	
   	 	  	 
 	 
   *	
$ *
²¡Ü
= 

       
  	
     
	
 
  	 . 1 	
   	

 
  !	
 	

  	 	 	  
 
Making a callprivate
²¡Ü
- 	 
  	
   	 	  	 
	   	 	

   
   	

    	 
Checking call length using Call Duration Timer
²àà
&     	  	   
       
	
	

   
  	     	


Displays
The display shows the last call you made, or
the current call, and the total elapsed time.
You parked your last call. The display
shows the period the call was parked. This
display only shows when the call is active at
your telephone or has just been released by
your telephone.
221 02:47
Line001 01:45 
						

							Answering calls /63
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Disconnecting by accident
-  	
	

 
   	   

	

 
 	 	 	

  	 
   	


*    		 
  
 
 
   	


Time
²¡âÜ
?  	  

	   
	 	
  
 
	  	 	

 
						

							P0941565 02 Modular ICS 5.0 System Coordinator Guide
Making calls
 	 	 	  	 	 	

 

  
	 	
    	

 	 

+
, *    	
 
	
 	  
 
  
	
 1	   	 
	 	 0>
, *     	 
  	
 
 	
 4  	
 
     
5
,*
Â	
 
	
  	
     1
 	( 	 @2
,*
   	 
  	
 
 	
 	
   
    	

    

, * 	 
   	
 
 	
  	 
    
(	 7	
  	
   

, ?    	 	 	 
	
 	 1

	
  
	  	 	 23
Displays
The telephone you have called has no
internal lines available. Press
LATERto use
the Ring Again or Message features or press
PRIORITYto make a priority call.
You are dialing using Pre-dial. To erase an
incorrectdigit,press theleftendof
ÃorBKSP. When the number is
complete, select a line or lift the receiver.
This prompt remains on your display as long
as you are on a call you have dialed. To
transfer the call, press
TRANSFER.
Your telephone is already connected to the
telephone you are trying to call. Check your
active line buttons, and return to that call.
221 busy
PRIORITY LATER
9__
QUIT BKSP
95551234
TRANSFER
Already joined 
						

							Making calls /65
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Wait for the telephone to be answered. If no
one answers, press
LATERto use the Ring
Again (page 72) or Message (page107)
feature, or press
PRIORITYto make a priority
call.
You cannot use Ring Again on your current
call. You can only use Ring Again while you
have a busy signal on an internal call or line
pool request or while an internal call is
ringing.
The telephone you are calling has Do Not
Disturb turned on. Press
LATERto use the
Ring Again or Messagesfeatures, or press
PRIORITYto make a priority call.
You have dialed a number, but the least
expensive route that the system is
programmed to use is busy. Unless you
release the call, it goes through on a more
expensive route.
The last number you dialed or the number
you saved for Saved Number Redial was a
speed dial number that displayed a name
rather than the number. The number is dialed
correctly, but you cannot see it.
You have attempted to use the private line
assigned to another user.
Enter the digits of the number you want to
dial.
You have not dialed an external telephone
number since the last power interruption or
system reset.
Either you have no prime line or your prime
line is busy. Select a line manually before
dialing.
You have entered the number of a telephone
that is not in service.
The telephone you have called is on another
call. Press
LATERto use the Ring Again or
Message features.
Calling 221
PRIORITY LATER
Cant ring again
Do not disturb
PRIORITY LATER
Expensive route
Hidden number
Line denied
Line001
TRANSFER
No last number
No line selected
Not in service
On another call
LATER 
						

							66/ Making calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
Choosing a line using a line button

 	  
   	 
 	
  

 *  
  
  
 	 
	    	 	 	

 7	 	
 
 
	

  
	 	   	  

 :2$;; 	
 2$;;  	 	   	
 	 
 	
  
   	 	
 	
	

 	  	  	
  
 
 	 
³
    	

  	 	
   

The call you are trying to make has been
restricted in programming. A possible reason
is time-of-day restrictions on certain calls.
PressYESto use Ring Again. PressNOto
send a message. See
Sending messageson
page 107 and
Turning on Ring Againon
page 72.
Either you have no prime line, or the prime
line is in use, or the line programmed for an
autodial number, speed dialnumber, or
Hotline is in use. Select a line and dial again.
PressYESto send a message. See
Messages.
For other displays, seeCommon feature displayson page 227.
Restrictedcall
Ring Again?
YES NO EXIT
Select a line
Send message?
YES NO 
						

							Making calls /67
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Line pools
( 
 
  	   !	
 
 	 	  	
 
	 
 
 	  	 
  	 
 
  	 	
!	
 	


 :-61  	 	 $@ 
 
 	
 	 
 	
 	
  	 	   
( 
 
 	 
  	   
	
   	 
 

 	 
 	     
  
 
 		
	
 
 
 
    	  
 	  	 
   !	
 
 -   	 
	 
 	 
  	 

 	

    	 	 

 
 	 
 	
  	
	  	

 

    
 	 	 
   
 
	

   
 
  
 	 
Using a line pool to make a call
?    	 	 
 
 	

+
$ *
²ßÝ
=  	 
 
 	 

-  	 	  	
 
  	 	 	 	

  	 


       	 
 
$ 1
 	 	
 
 45
= %	
  
 
 	 
 
						

							68/ Making calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
Programming a memory button with a line pool feature code
&  	 	    
 
 	 

     	 
   
	 
 	  	 

 	
 
 
  	 	  
 

  
 
 	 1	

 	 
	 $=0   	
-  	 	    	  
 	  	 	 
  
 
 	

  
  	 
 
 	  
	  

     
        
	    	

 		
	

Making calls from an ISDN terminal
-1% 	
 
  	 
     	 

	 
    	 	  	

  	-1%
	
 	 	 !	
 
   	 
 
 

    (/1 	
Changing how you dial your calls
 	    
	
  	

  	+
$ *
²¥¡Û
= *
£NEXT
  
	
 
  	 		
3 *
³OK 
  

	
 
	
 

 
	
 
 	 
 	  	
  	
   
Tip -If no lines are available in the line pool, you can use
Ring Again at the busy tone. You are notified when a line
in the line pool becomes available. See
Using Ring Again
on page 72. 
						

							Making calls /69
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Using Standarddial
1	
	
 
	
 	

   	 	 	

  
 	 
 	


	
   -  	 	  
   


			

   
    
Â

 	  1	
	
 
	
  	 :2$;;  	 2$;; 

       -  	  
   (	 
	
  *
	
 	  

	

Using Automatic dial
(	 
	
 	

  
	
 	   

	 
 
  
  

 	  	  	
	

	 
(	 
	
 
     
 	  

     
   

 
  	 		
 	
	
	4((5
	  (	 
	

Using Pre-dial
*
	
 	

    	 
    
	   		

 	  	

  	

   
	



  
 	 
  
 
      

	 
	
  !	
 	
 	
  
 
 
     
4!	
  	
5
      	 

Tip -If your telephone starts ringing while you are
pre-dialing a number, you can stop the ringing by turning
on Do Not Disturb (
²¡Þ). This does not affect
numbers you are entering.
You cannot pre-dial a telephone number if all the lines on
your telephone are busy. 
						

							70/ Making calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
When the internal number you have called isbusy
 	 	 
  
  	      	
	

 
 
Priority Call
-   	  	
  	 %  % 	  
	
 
            	   ? 
	    	
 
  
 
Making a priority call
$ *
²ßá
= &	  	   	
(    	  	

 
  	 	

 	
 
  	  
  	

 ) 	 

 	

 $ 	 
  	 
) *  * +**, 	 $20 -  

    	

 	   	 	




  	  !
 7
 	
 
 	



	 
:
	  
  :-61
  	 1A$ :6%  	  	 
	 45 
   :
	   :-61

Tip -Priority calls cannot be made to Hunt Group DNs.
For more information on Hunt Groups see
Programming
Hunt Groups
on page147.