Nortel Modular Ics 5.0 System Coordinator Guide

							Forwarding your calls /101
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Displays while canceling redirection
You have one external line onyour set, but
you need a second line to perform line
redirection. Redirect your external line using
a line pool as the outgoing line.
You are attempting to redirect a line and the
line you have chosen is the outgoing line you
have selected as a destination. You cannot
redirect a line to itself. Select another line.
Enter a valid line pool access code.
You have attempted to redirect a line, but
someone else has already redirected that
line. Press
¥orOVERRIDEto override the
previous redirection and redirect the line as
you want.
You can redirect calls only on individual
lines.
Select the line that isused to redirect calls
out of the system.
Press the lines to be redirected. To undo a
line selection, press it again.
Press
ALLto redirect all your lines.
Continue to press the lines to be redirected.
Press
³orOKwhen you are finished.
The line you are attempting to redirect
cannot be redirected because the hardware
does not support redirection.
Press the lines that are no longer to be
redirected. The lines light up as you press
them. Once you cancel redirection for a
line you cannot restore it by pressing the
line again. Press
ALLto cancel redirection
for all your lines. When you are finished,
press
³orOK.
No line to use
Outgoing line
Pool code: ___
QUIT
Redir by 221
OVERRIDE
Redirect denied
Select line out
QUIT
Select line(s)
QUIT ALL
Select line(s)
ALL OK
Unequipped line
Select line(s)
QUIT ALL 
						

							102/ Forwarding your calls
Modular ICS 5.0 System Coordinator Guide P0941565 02
How Line Redirection isdifferent from Call Forward
6	

 )	
 	
 	

 	

 	 	 	 	 	
	

   	 
      	    A 
/
 
 
  
    	
 
 		   	 

 
	  A /
 	 
  6	

)	

Using Line Redirection

 
 
 	 	 
   

  

	 

    

 	 
 
 
 	 		 	 
    



 	 	  
    
  	  



  	 A /
    
	 	

	

 	 	 		
	
 
  	
   -   
   	 		   
	

  A /
 	  
²%
 
¨  
  	

  	 

&
  	 	A /
   
 
 	 
	  	

 	 
  		

  	 


. 	
  	
 
 
 -  !	
 

  
   	  	
  	 
Continue to press the lines that are no
longer to be redirected. Press
³orOK
when you are finished.
For other displays, seeCommon feature displayson page 227.
Select line(s)
ALL OK 
						

							Forwarding your calls /103
P0941565 02 Modular ICS 5.0 System Coordinator Guide

  
    	 	 	 
 
 -
 	

 	 
 
	  
  	 	
- 	 	 	

 	 ! 
 



   
 	

  	 !	
 
	 
						

							P0941565 02 Modular ICS 5.0 System Coordinator Guide
Communicating in the office
Paging
*	 	

   	 	  	
   
 	   

	
    		
	

Making a page announcement
$ *
²ßâ
= 6 	 	  *	  	+
Ú  
 	 4	
 	5
Û 	 !	
 	 4!	
 	5
Ü 	
 	
 !	
 4
 	5
3 - 	  	 
9 :	  	
@ *
¨
*	  ;  	

 
Tip -Instead of entering the Page feature code followed
by the page type, you can enter the following shortcut
codes.
Internal²ßÚand zone (0 to 6)
External²ßÛ(code 2 has no zones)
Combined²ßÜand zone (0 to 6) 
						

							Communicating in the office /105
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Activating anddeactivating theability to page

 
  	    
 	  
 	     

 1 	   	 	 $3  
	
$ *
²¥¥ÛßßÜÝÝ
= *
ÛÜßÝß4 
 	
  1  6
	
	
5
3 *­	
   	
   

  	  	
9 *­
@ *Ô   

	 	
Paging
0 *
CHANGE 
    +Y4
5 N45
Creating page zones
	 
 	  	
    !  
	

 
  	 
	 1 	 
	 	 $3   	
$ *
²¥¥ÛßßÜÝÝ
= *
ÛÜßÝß4 
 	
  1  6
	
	
5
3 *­	
   	
   

  	  	
Tip -Hunt Group DNs cannot be included in a page zone.
For more information on Hunt Groups see
Programming
Hunt Groups
on page 147 . 
						

							106/ Communicating in the office
Modular ICS 5.0 System Coordinator Guide P0941565 02
9 *­
@ *Ô!   

	 	
Page Zone
0 *
CHANGE 
    +123456None

 	 	 	  
  	  	 	   
  

 	 	  Y4
5
(   	   	 
 	  	 
  	 	

   
	 
	!     	 	   @;

 	

 	  	  
  	 	
 	
  	!  
 	 	 	 
	
   			

 
 
Displays
Tip -Make sure that everyone who needs to make page
announcements has a list showing which telephones are
in which page zones. Enter this information into your
Modular ICS 5.0 Programming Record.
Enter the desired page zone number (0- 6) or
press
ALL.
You have entered a page zone code that is
not between 0 and 6.
Select the type of page you want. See the list
in
Making a page announceme nton page
104.
The time allotted for paging has expired.
You are making a page. The displayshows
the page zone you have chosen. Press
²
or¨when you are finished.
Enter zone:___
ALL
Invalid zone
Page choice:
SETS SPKR BOTH
Page timeout
Paging ALL 
						

							Communicating in the office /107
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Using Page with external pagingequipment
&  	 	 	 	  !	
 	 B
!	
 	  
 	B  A  	 
			

 		
   !	
 	  

  	
 
     
  	
      A
 	
Sending messages
 :	 	 	

   
	 	 	  


	  	 
	
    		
 
 

 	 (	 
 1	:

4(1:5 :	 	

	   	 	 	 	
 :	 	  	 	 	 
   	

   	
 	 	
 !	
  	
	     	  	  
	
 	 	 
	
A page is already being made in the page
zone you have requested.
For other displays, seeCommon feature displayson page 227.
Tip -You can make an announcement to one person by
placing a voice call to their telephone.
Paging busy 
						

							108/ Communicating in the office
Modular ICS 5.0 System Coordinator Guide P0941565 02
Sending a message

 	 
	 	 	   

	  	 

    	 

 	 
    	  
 

 
 
     	  -  
  	


	
 
  	 	
 	  46(*5
 	 
   3; 	
 
  
	
 

 	

  	 		


 
  	 (	
 1	 :

 4(1:5 	

 	  		
 
  
²Ú
%
   	   		
 


  	 1
 %	
   	 :	 &	
A	      	 

-  
  		  	

   	
 	
	 
   6	

 * 	  	
	   
 
  	
   


	  
 	  	
) 		
 
 
  	 (1: 	
	 
	 	  
   
û£ßÞ -  		
 
 	  :	
/
 	 	   
  	 	

	  
  			

 	 
 	

 
	
  	    	

  	

)  	   :	 /
 	
	  	 	 #$ %& #	 
$ *
²Ú
=   	 
  	 
 

	 
ADD
+     	  	 
  	 

 

	 
						

							Communicating in the office /109
P0941565 02 Modular ICS 5.0 System Coordinator Guide
3    	
          	
 
  	  
						

							110/ Communicating in the office
Modular ICS 5.0 System Coordinator Guide P0941565 02
  	 
  	 
 

	
*
CALL
-  	  	

   	   	 
 
	  	
 
 !  	 
 	

	
 
 	  
   	
 
	

 

Replying to a message using an analog telephone connected
to an ASM
  	 		
 
 
  	 (	
 1	
:


*û
¥ßÞ   			


 	
      
 	

 4 	 		  

	
 

	
 
   	
  	
5
-  		
 
 	 :	 /
 	
  	   
 	 
    
     
  	
 

	

  	 	 
	  
 
			

 	  
 	

  	
 	 
  	

  	

) 		
 
 
  	(1:  
:	 &	/
 	 4û
¥ßÞ5
 
 	
 	    
(	
 
 
  	 (1: 	
!	
 	    :	 &	/

	 4û
¥ßÞ5 ) !	
 	 
 	

 	  !