Nortel Modular Ics 5.0 System Coordinator Guide
Have a look at the manual Nortel Modular Ics 5.0 System Coordinator Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 211 Nortel manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Getting started with Norstar /21 P0941565 02 Modular ICS 5.0 System Coordinator Guide Placing the programming overlay on Norstar sets Heading Back NextShowNorstar Programming Overlay Heading Back NextShowNorstar Programming Overlay Shows you the heading for the current level Moves you one item back at the current levelShows you the first setting within the level Moves you one item forward at the current level Heading Back NextShowNorstar Programming Overlay
22/ Getting started with Norstar
Modular ICS 5.0 System Coordinator Guide P0941565 02
A map for working in programming
²¥¥‚¯öìéí
4
ÛÜßÝß5
.
4
ÛÛàÝÛ5
¥¥æé÷ä
)
$#0
Customize each telephone on the system. You can
change where a call is forwarded, give a telephone
a name, or allow certain features to be used at a
telephone. You can change the button
programming on any telephone on the system.
Program names for each line.
Turn services on or off: Ringing service, Restriction
service, and Routing Service.
Program up to 70 different telephone numbers so
internal users can dial them with a two-digit code.
Change or erase the password you use for
programming, or the one you use for Call log. On
an XC system, you can change the Companion
portable telephone registration password.
Change the time, date, or both.
Access the headings that define Hunt Groups,
Hospitality services. Enter the BusName, which
displays on caller ID lines.
On a MICS-XC system, access registration records
for Companion portable telephones so you can
disable or enable the sets.Terminals&Sets
Lines
Services
Sys speed dial
Passwords
Time&Date
System prgrming
Getting started with Norstar /23 P0941565 02 Modular ICS 5.0 System Coordinator Guide System Coordinator user interface Te rm i n a l s &SetsShow set Enter digits or press LIST.Capabilities Fwd no answer Fwd to Fwd delay Fwd on b u sy Fwd to DND on busy Handsfree HF answer back Pickup grp Pag e z o ne Pag ing D-Dial Priority call Hotline Intrn # Extrnl#....Useprime line Aux. ringer Allow redirect Redirect ring ATA settings ATA ans timer Msg Indicate Name User preferencesModel Button progrming # of buttons B01 ... BXX CLRTEL#FEATR User speed dial # of speed dialers Spd # XX Call log opt’ns No one answered Unanswered by me Log all calls No autologging Dialing opt’ns Standard dial Pre-dial Automatic dial Language Display cntrst Ring type Voice path Dflt: Handsfree Headset Restrictions Set restrictions Set lock (Partial, Full, None) Allow last no Allow saved no Allow link Telco features 1st Display Called ID Lines Show lines ___ Enter digits or press LISTName
24/ Getting started with Norstar
Modular ICS 5.0 System Coordinator Guide P0941565 02
+ 1
Services Ringing
serviceSche d: Night
Evening
Lunch
Sched 4
Sched 5
Sched 6Off, Manual,
Auto
Restrn
servicesSche d: Night
Evening
Lunch
Sched 4
Sched 5
Sched 6Off, Manual,
Auto
Routing
serviceSche d: Night
Evening
Lunch
Sched 4
Sched 5
Sched 6Off, Manual,
Auto
Sys speed
dialSpeed dial #
Enter digits
or press LISTadd/change tel #
Use prime line
Display digits
Name
Passwords Call Log
pswdsShow set Log pswd
Progrming
pswdsSys admin:
23646
Basic: 22742
Reg. pswd
(MICS-IX,
only)
Hospitality Desk pswd: 4677
Cond
pswd:None
Time&Date Hour
Minutes
Ye a r
Month
Day
System
PrgrmingHunt Group Show Group Member DNs
Line
assignmentShow line ___
Unassigned/
Assigned
Mode Broadcast
Sequential
Rotary
Hunt Delay
If Busy BusyTone/Queue
QTimeout
Overflow
Name
Getting started with Norstar /25 P0941565 02 Modular ICS 5.0 System Coordinator Guide Starting and ending a session ( Press². Press¥¥‚¯öìéí.Thisisthesame as pressing¥¥ÛßßÜÝÝ. Press. This is the same as pressingÛÜßÝß.Press RETRYto re-enter the password if you enter an incorrect character. The display shows the first of the sevenheadings available for administration programming. is the password, unless the password has been changed. Check the Programming Record for the most recent password. System Prgrming (c ontinued)Companion (MICS-XC only)Registration Registration Portable DNs Show DN Available/unavailable Radio data Re-evaluation Status Radios Cell Assignment/Show radio Assigned/unassigned Cells Show Cell Cell radios/Cell nghbrs/ Cell rad nghbrs BusName Hospitality Room/desk infoShow set Room # Adm pwd req’d Service time Hour Minutes Alarm Attn attempts Retry intrvl Attn duration Time format 12 hr/24 hr Expired alarmsNotify set Use tone Jan 1 12:00pm Feature: Password: RETRY Terminals&Sets
26/ Getting started with Norstar
Modular ICS 5.0 System Coordinator Guide P0941565 02
Ending a session
¨
UPDATE
*
DNs !
-
/
Modular ICS 5.0 Programming
Record
-
/
) !
Press¨to end the session.
After a few seconds, the time and date reappears on
the display.
Display digits:Y
CHANGE
End of session
Frequently used programming operations /27
P0941565 02 Modular ICS 5.0 System Coordinator Guide
Frequently used programming
operations
6 -
!
Changing the time and date on the display
Entering letters and numbers using the dialpad
Press².
Press¥¥¡ÝßÜ(which is the same
as
¥¥æé÷ä).
PressÛÛàÝÛ()or
ÛÜßÝß()
The passwords can be changed. SeeUsing passwordson page 196 for more
information.
Jan 1 12:00pm
Feature:
Password:
RETRY
first press
second press
third press
fourth press
28/ Frequently used programming operations Modular ICS 5.0 System Coordinator Guide P0941565 02 In this example, you are changing the time to 1:30 p.m. PressCHANGE. Press the dialpad buttons to enter the hour. Use two digits for all hours. The clock on the display shows either one or two digits. The display prompts you to choose a.m. or p.m. Press CHANGEandOKto select p.m. PressNEXT. PressCHANGE. Press the dialpad buttons to enter the minutes. If you are only changing the time and not the date, press¨to end your session. In this example, you are changing the date to July 15, 1998. PressNEXT. PressCHANGE. Press the dialpad buttons to enter the year. PressNEXT. PressCHANGE. Press the dialpad buttons to enter the month. Use numbers for the months: 01 is January; 12 isDecember. PressNEXT. Hour:01 NEXT CHANGE Hour:___ CANCL AM OK CHANGE Hour:01 NEXT CHANGE Minutes:00 NEXT CHANGE Minutes:___ CANCL Minutes:30 NEXT CHANGE Year:97 NEXT CHANGE Year:___ CANCL Year:01 NEXT CHANGE Month:01 NEXT CHANGE Month:___ CANCL Month:07 NEXT CHANGE
Frequently used programming operations /29
P0941565 02 Modular ICS 5.0 System Coordinator Guide
(
) !
Adding or changing a system speed dial
!
Begin the programming session
PressCHANGE.
Press the dialpad buttons to enter the day.
Press¨to end your session.
Press².
Press¥¥ÛßßÜÝÝ.
PressÛÜßÝß.
Day:01
NEXT CHANGE
Day:___
CANCL
Day:15
CANCL
End of session
Jan 1 12:00pm
Feature:
Password:
RETRY
30/ Frequently used programming operations Modular ICS 5.0 System Coordinator Guide P0941565 02 Choose a speed dial code Add or change the telephone number Select a line for the speed dial code PressÔthree times. Press. PressâÚ. You can pick any system speed dial codebetween 01 and 70. Press. PressCHANGE. Use the dialpad to program the telephone number that you want to add. The telephone number can be up to 24 digits long. Your display shows the telephone number, which is represented by the row of n-characters shown here. Press OK. PressÔ. PressCHANGEto see your options:Use prime line, a specific line (for example Use line: 01), a line pool (for example Pool code:71), orUse routing tbl . Stop pressingCHANGEwhen the display shows the prime line again. In this example, the system selects the prime line automatically to dial speed dial code 01. This is the most common choice. Terminals&Setsö Sys Speed Dialö Speed dial#:___ LIST Speed dial#:01ö FIND 01:No number CHANGE 01:___ CANCL OK 01:nnnnnnnn__ CANCL BKSP OK 01:nnnnnnnn CLR CHANGE Use prime line CHANGE Use prime line CHANGE