NEC Neax 2400 Ipx Wireless System Manual

							CHAPTER 1 NDA-24301
Page 14
Revision 1.0
GENERAL DESCRIPTION
Table 1-3  List of OG Call Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS
ALTERNATE ROUTING/ROUTE 
ADVANCE×–––
SPEED CALLING-STATION/
GROUP––––To be substituted for the memory 
dial of PS
SPEED CALLING-SYSTEM××××
Note 1
SPEED CALLING OVERRIDE-
SYSTEM××××Note 1
TOLL CALL RESTRICTION×–––
PUSH-BUTTON TO ROTARY 
CONVERSION––––
PRIMARY CODE RESTRICTION×–––
OG TRUNK QUEUING––––
OFF HOOK QUEUING––––
MISCELLANEOUS TRUNK 
RESTRICTION/ RESTRICTION 
FROM OG CALL×–––
Table 1-4  List of IC Call Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS
EXTERNAL MUSIC-ON-HOLD––––
ATTENDANT CONSOLE××××
DIT–×–×
Note 2
SLUMBER TIME - DO NOT 
DISTURB––––
POWER FAILURE TRANSFER
––––PS cannot be used for the Night 
station
DISTINCTIVE RINGING
–×–×Available in the D
term PS or 
Dterm PSII  Note 3
REMOTE ACCESS TO SYSTEM/
AUTOMATED ATTENDANT–×–×Note 4
TENANT SERVICE××––
MUSIC-ON-HOLD×××× 
						

							NDA-24301 CHAPTER 1
Page 15
Revision 1.0
GENERAL DESCRIPTION
Note 1:
OG call using [S-3] SPEED CALLING-SYSTEM/[S-61] SPEED CALLING OVERRIDE-SYSTEM can
be placed from PS terminal since Series 7400 Release 9 software. 
For more details, see SPEED CALLING-SYSTEM [S-135] in Chapter 4.
Note 2:When a  PS is assigned as the target station of DIRECT IN TERMINATION (DIT).
1) When the PS is Out of Zone (Out of Zone or in a state of POWER OFF), RBT is heard by the calling
party.
If AUTOMATIC ANNOUNCEMENT-PS OUT OF ZONE is assigned by the PS, the calling party does
not hear the Out of Zone Announcement, and instead hears RBT.
2) If a PS user moves Out of Zone while connected to an outside party, AUTOMATIC ANNOUNCEMENT-
DISCONNECTED PS OUT OF ZONE cannot be heard by the outside party, but instead BT is heard.
3) When a PS is engaged and an outside call attempts CALL WAITING, the caller will hear RBT.
4) When a DIT call is transferred to a PS or a station that has set C.F.-PS INCOMING INCOMPLETE,
the calling party hears RBT if the target PS or station is Out of Zone or in the state of lock-out.
5) PS is unable to hand over when it is ringing. When the PS hands over, the called PS stops ringing, and
the calling party hears RBT.
6) In Fusion Network, PS must be called with Physical Station Number.
Note 3:A call from an incoming Tie Line gives the same ringing as a station call.
Note 4:Remote Access to System/Automated Attendant: Terminating side is PS.
1) When the PS is Out of Zone (Out of Area or in a state of POWER OFF), the calling party will hear BT.
If the AUTOMATIC ANNOUNCEMENT-PS OUT OF ZONE is set by the PS, the calling party does not
hear Out of Zone Announcement. The calling party hears BT.
2) If a PS user moves Out of Zone while connected to an outside line, AUTOMATIC ANNOUNCEMENT-
DISCONNECTED PS OUT OF ZONE cannot be heard by the subscriber outside. BT is heard.
3) When a REMOTE ACCESS TO SYSTEM/AUTOMATED ATTENDANT call is transferred to a PS or a
station with C.F.-INCOMING INCOMPLETE set and when the transferred party is Out of Zone or in
the state of lock-out, the calling party hears RBT.
4) PS is not allowed to hand over while ringing. When the called PS is ringing from the REMOTE ACCESS
TO SYSTEM/AUTOMATED ATTENDANT and the PS hands over, the PS stops ringing and the calling
party hears RBT. 
						

							CHAPTER 1 NDA-24301
Page 16
Revision 1.0
GENERAL DESCRIPTION
Table 1-5  List of Station Service Features 
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS
OFF HOOK ALARM––––
8-PARTY CONFERENCE––––
C.F.-A-OUTSIDE××××
Note 1 
C.F.-D-OUTSIDE××××
C.F.-B-OUTSIDE××××
C.F.-A××××
Note 6
C.F.-A CANCEL BY A ROUTINE 
DIAGNOSIS––––
C.F.-I’M HERE××××
Note 7
CALL TRANSFER - ALL CALLS××××Note 2
EMERGENCY CALL––––
DAY/NIGHT CLASS OF SERVICE––––
CALL WAITING××××
Note 3 
CALL PICK UP - GROUP
××––Not available to do “Pick Up” 
from another node
CALL HOLD––––
THREE-WAY CALLING××××
TIMED REMINDER––––
CALL PICK UP - DIRECT
×–––Not available to do “Pick Up” 
from another node
STEP CALL××××
Note 4
SPLIT C.F.––––
HOT LINE××––
PERIODICAL INDICATION TONE×–––
AUTOMATIC CALL BACK 
CANCEL––––
CLASS OF SERVICE - INDIVIDUAL××××
STATION-TO-STATION  CALLING××××
STATION-TO-STATION CALL 
RESTRICTION××××
EXECUTIVE RIGHT OF WAY––––
STATION HUNTING––––
CALL BACK–––– 
						

							NDA-24301 CHAPTER 1
Page 17
Revision 1.0
GENERAL DESCRIPTION
Note 1:
C.F.-D-Outside is not applicable by way of CALL TRANSFER-ALL CALLS.
Note 2:Recall service can be activated to the transferred station when the PS, with C.F.-PS INCOMING CALL
INCOMPLETE in service, moves Out of Zone, after placing a call on hold.
Note 3:Call Waiting
1) This service is valid in the two party call when a call is terminated – from station-to-station, to PS, to
Central Office line, or to Tie line call – but invalid when other services using switch hook flash are
executed to the PS or when the PS is connected to the Attendant Console.
2) To set CALL WAITING, it is necessary that the Service Restriction Class data (ASFC) be assigned in
the office data assignment.
Call Waiting service is provided according to each service feature restriction class.
3) There is no limitation of the number of CALL WAITING services such as the number of simultaneous
settings/the number of occurrence of answers.
4) This service cannot be used if the Central Office line (DIRECT IN TERMINATION) or a call via the
Attendant Console.
Note 4:Tie line STEP CALL is not available from PS.
Note 5:PS can activate this feature only for Attendant Console.
Note 6:In the Fusion network, the destination of call forwarding from PS must have a Telephone Number.
Note 7:This feature is available for Series 7400 Release 8 or later software. FLEXIBLE NUMBERING OF 
STATION××××
AUTOMATIC HOWLER TONE 
SENDING––––
STATION 5 DB PAD××××
BOSS/SECRETARY––––
C.F.-D××××
Note 6
PUSH-BUTTON CALLING––––
PRIORITY CALL×–×–
Note 5
LINE LOCK-OUT––––
RECALL×–×–
C.F.-B××××
Note 6
PRIVACY––––
ONE DIGIT HOOKING––––
Table 1-5  List of Station Service Features  (Continued)
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS 
						

							CHAPTER 1 NDA-24301
Page 18
Revision 1.0
GENERAL DESCRIPTION
Note 1:
1) Call Park is available when:
operating party is the PS in Home PBX
held party is the PS in Home PBX
2) Call Park is not available when:
When Visitor PS originates a call to a station/PS in Visitor PBX(two-party connection), the call
cannot be parked from the called party.
the operating party is PS in Visitor PBX.
Note 2:Available since Series 7300 Release 5 software.
Table 1-6  List of Other Service Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS
AUTHORIZATION CODE––––
ACCOUNT CODE––––
C.F.-INTERCEPT/
ANNOUNCEMENT×–––
CALL PARK––
Note 1
DISTRIBUTION ACCESS UNIT 
(DAU)××––Note 2
DSS CONSOLE––––
ANNOUNCEMENT SERVICE×–––
OG CALL RESTRICTION 
ANNOUNCEMENT×–––
PAGING––––
PAGING TRANSFER––––
RADIO PAGING––––
UNIFORM CALL DISTRIBUTION
(UCD)––––
UCD-DELAY ANNOUNCEMENT––––
LAST NUMBER CALL
––––Substituted for the LAST 
NUMBER CALL function of PS 
						

							NDA-24301 CHAPTER 1
Page 19
Revision 1.0
GENERAL DESCRIPTION
Table 1-7  List of Attendant Console Service Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS
AUTOMATIC RECALL–×–×
ATTENDANT LOOP RELEASE––––
CALL TRANSFER-ATTENDANT–×–×
Note 1
SUPERVISORY CALL–×–×
DIGITAL DISPLAY-TRUNK––––
CALL PROCESSING 
INDICATION××××
SERIAL CALL––––
CALL WAITING LAMP DISPLAY×–×–
ATTENDANT CAMP-ON––––
NON-DELAY OPERATION×–×–
Note 3
INTER-POSITION TRANSFER––––
DELAY OPERATION×–×–
Note 3
DIAL MONITOR–×–×
SPLIT CALL FORWARDING––––
TRUNK GROUP BUSY LAMP––––
SPEED CALLING-STATION/
GROUP––––
SPEED CALLING-SYSTEM––––
INDIVIDUAL ATTENDANT 
ACCESS×–×–
ATTENDANT OVERRIDE––––
STEP CALL–×–×
ATTENDANT MONITOR 
SERVICE––––
ATTENDANT NIGHT TRANSFER×–––
BUSY VERIFICATION––––
INDIVIDUAL TRUNK ACCESS––––
DIAL ACCESS TO ATTENDANT××××
Note 2, Note 3
DIGITAL DISPLAY-STATION××××Note 3
BUSY LAMP FIELD-FLEXIBLE××––
RECALL×–×– 
						

							CHAPTER 1 NDA-24301
Page 20
Revision 1.0
Note 1:Upon receiving an incoming call, the Attendant Console transfers the call to a PS, then it ends up with the
PS connected to the outside.
If, in this situation, the PS user moves to a place Out of Zone, the caller from the outside line will hear BT.
Note 2:While the Attendant Console is calling a PS, the services associated with Out of Zone such as C.F.-PS
INCOMING INCOMPLETE, AUTOMATIC ANNOUNCEMENT-PS OUT OF ZONE and AUTOMATIC
ANNOUNCEMENT-DISCONNECTED PS OUT OF ZONE are not available. 
When an Attendant calls a PS, the individual attendant number can be displayed on the LCD of the PS.
However “OPR” cannot be displayed on the LCD of the PS.
Note 3:This service Feature has the limitation of Fusion Link Network. Refer to the Fusion Network System
Manual/Feature Programming Manual. 
						

							NDA-24301 CHAPTER 1
Page 21
Revision 1.0
GENERAL DESCRIPTION
Note 1:
This service feature has the limitation for the Fusion Link Network. Refer to the Fusion Network System
Manual.
Table 1-8  List of Network Service Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From 
PSTo PS From PS To PS
AUTOMATIC CIRCUIT 
ASSURANCE×–×–
CENTREX COMPATIBILITY–×–×
DELUXE TRAVEL CLASS MARK–– – –
LCR - AUTOMATIC OVERFLOW×–×–
LCR-3/6-DIGIT×–×–
Note 1
TANDEM CONNECTION–– – –
TANDEM TRUNK QUEUING–– – –
TANDEM PAD CONTROL–– – –
TIE LINE ACCESS×× × ×
OUTGOING TRUNK BUSY -
ANNOUNCEMENT×–– –
HOT LINE - OUTSIDE×–– –
DIGITAL TRUNK INTERFACE×× × ×
LCR - SPECIAL LINE WARNING×–– –
UNIFORM NUMBERING PLAN×× × ×
LCR - TIME OF DAY ROUTING–– – –
LCR - CLOCKED MANUAL 
OVERRIDE–– – –
ATTENDANT MANUAL 
OVERRIDE–– – –
Table 1-9  List of Operation/Maintenance Service Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PS From PS To PS
SERVICE PEG COUNT×–––
TRAFFIC MEASUREMENT××––
INDIVIDUAL TRUNK ACCESS––––
LINE LOAD CONTROL–––– 
						

							CHAPTER 1 NDA-24301
Page 22
Revision 1.0
GENERAL DESCRIPTION
Note 1:
Automatic Announcement - PS Out of Zone/C.F. PS Incoming Incomplete may not be available. It depends
on Public ISDN Network.
Note 2:The ISDN terminal cannot transfer the call to a PS or provide the 3-party conference feature including a
PS.
Note 3:A PS can transfer the call to ISDN terminal and provide the 3-party conference feature including the ISDN
terminal.
Table 1-10  List of ISDN Service Features
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESStandalone Fusion
REMARKS
From PS To PSFrom 
PSTo  P S
DIRECT INWARD DIALING–×–×Note 1
SUB ADDRESS - PRESENT×–––
SUB ADDRESS - ADDRESSING–×–×
Note 1
CALLING PARTY NUMBER - 
PRESENT×–––
CALLING PARTY NUMBER -  
DISPLAY–×–× 
						

							NDA-24301 CHAPTER 1
Page 23
Revision 1.0
GENERAL DESCRIPTION
Table 1-11  List of CCIS Features 
×: Available : Conditionally available–: Not available/Not used
NAME OF SERVICE FEATURESORIGINATED 
FROM PSTERMINATED
TO PSREMARKS
Attendant Controlled Conference - 
CCIS–×
Automatic Recall - CCIS×–
Brokerage Hotline - CCIS–×
Call Forwarding - All Calls - CCIS××
Call Forwarding - Busy Line - CCIS××
Call Forwarding - Don’t Answer - 
CCIS××
Call Transfer - All Calls - CCIS××
Calling/Called Number Display - 
CCIS××
Consultation Hold - All Calls - CCIS××
Deluxe Traveling Class Mark - CCIS××
Dial Access to Attendant - CCIS×–
Digital Display - Station - CCIS×–
Direct In Termination - CCIS–×
Distinctive Ringing - CCIS–×
Do not Disturb - CCIS–×
Dial Number Display - Recall - CCIS××
Flexible Numbering of Station - CCIS×–
House Phone - CCIS–×
Hot Line - CCIS××
Incoming Call Identification - CCIS×–
Individual Attendant Access - CCIS×–
LDN Night Connection - CCIS–×
Miscellaneous Trunk Access - CCIS×–
Miscellaneous Trunk Restriction - 
CCIS×–
Multiple Call Forwarding - All Calls - 
CCIS××
Multiple Call Forwarding - Busy Line 
- CCIS××