NEC Neax 2400 Ipx Wireless System Manual
Have a look at the manual NEC Neax 2400 Ipx Wireless System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 5 NDA-24301 Pag e 2 74 Revision 1.0 Number sharing Data Assignment Sheet (2/2) OUTPUT EXTERNAL EQUIPMENT (OD) 0/1MESSAGE WAITING CONTROL (MW) 0/1SERVICE CONROL (LM) 0/1REMARKS
NDA-24301 CHAPTER 5 Page 275 Revision 1.0 ANSDN : Assignment of Number Sharing Data for Network Data Memory 1. GENERAL This command is used to assign and delete Main Station and Sub Station data for Number Sharing service. 2. PRECAUTIONS 1. This command is available for Series 7300 or later software. 2. This command is used for the Network Control Node. 3. For detailed information on Number Sharing service, see “Number Sharing” in Chapter 4. 3. DATA ENTRY INSTRUCTIONS M-UGN : Main User Group Number S-UGN : Sub User Group Number M-TELN : Main Telephone Number (Maximum 16 digits) S-TELN : Sub Telephone Number (Maximum 16 digits) OD : Output External Equipment Note 0 : Only Main Telephone Number is used for SMDR, MCI and VPS Mail Box Number. 1 : Both Main Telephone Number and Sub Telephone Number are used for SMDR, MCI and VPS Mail Box Number. Note:When this parameter is set to “0”, the mail box for the Sub Station must be deleted. MW : Message Waiting Control 0 : Message Waiting Control for Main and Sub Telephone Numbers 1 : Message Waiting Control for Main Telephone Number Only LM : Service Conrol 0 : Number Sharing
CHAPTER 5 NDA-24301 Pag e 2 76 Revision 1.0 4. DATA SHEET Number sharing Data Assignment Sheet (1/2) MAIN USER GROUP NUMBER (M-UGN)SUB USER GROUP NUMBER (S-UGN)MAIN TELEPHONE NUMBER (M-TELN) MAX. 16 DIGITSSUB TELEPHONE NUMBER (S-TELN) MAX. 16 DIGITS
NDA-24301 CHAPTER 5 Page 277 Revision 1.0 Number sharing Data Assignment Sheet (2/2) OUTPUT EXTERNAL EQUIPMENT (OD) 0/1MESSAGE WAITING CONTROL (MW) 0/1SERVICE CONROL (LM) 0/1REMARKS
CHAPTER 5 NDA-24301
Pag e 2 78
Revision 1.0
APMD : Assignment of Trunk Line Appearance Maximum Necessary Digit for DM
1. GENERAL
This command is used to assign/delete the maximum necessary digits (MND) data, associated with a PS call to
be originated by dialing an area/office code of the “existing PBX with no wireless function”.
2. PRECAUTIONS
None
3. DATA ENTRY INSTRUCTION
TENANT
(TN)DESTINATION CODE
(DC)
MAX: 10 digits
MAXIMUM
NECESSARY
DIGITS
(MND) 1-24
DC
Enter the access code + area/office code
of existing PBX without a wireless function.
TN
Enter Tenant Number.
MND
Enter the desired maximum
necessary digits.
NDA-24301 CHAPTER 5 Page 279 Revision 1.0 4. DATA SHEET Maximum Necessary Digit Data Assignment Sheet TENANT (TN)DESTINATION CODE (DC) MAX: 10 digitsMAXIMUM NECESSARY DIGITS (MND) 1 - 24
CHAPTER 5 NDA-24301 Pag e 2 80 Revision 1.0 APMLL : Assignment of PS Multiline Data for Local Data Memory 1. GENERAL This command is used to assign and delete My line and Sub Line data for Two-Line Operation. 2. PRECAUTIONS 1. This command is available for Series 7300 or later software. 2. This command is used for the Local Node. 3. For detailed information on Two-Line Operation service, see “Office Data Assignment” in Chapter 4. 3. DATA ENTRY INSTRUCTIONS MY-UGN :PS My Line User Group Number MY-TLN :PS My Line Telephone Number SUB-UGN :PS Sub Line User Group Number (Maximum 16 digits) SUB-TLN :PS Sub Line Telephone Number (Maximum 16 digits)
NDA-24301 CHAPTER 5 Page 281 Revision 1.0 4. DATA SHEET PS Multiline Data Assignment Sheet PS MY LINE USER GROUP NUMBER (MY-UGN)PS MY LINE TELEPHONE NUMBER (MY-TLN)PS SUB LINE USER GROUP NUMBER (SUB-UGN)PS SUB LINE TELEPHONE NUMBER (SUB-TLN)REMARKS
CHAPTER 5 NDA-24301 Pag e 2 82 Revision 1.0 APMLN : Assignment of PS Multiline Data for Network Data Memory 1. GENERAL This command is used to assign and delete My line and Sub Line data for Two-Line Operation. 2. PRECAUTIONS 1. This command is available for Series 7300 or later software. 2. This command is used for the Network Control Node. 3. For detailed information on Two-Line Operation service, see “Office Data Assignment” in Chapter 4. 3. DATA ENTRY INSTRUCTIONS MY-UGN :PS My Line User Group Number MY-TLN :PS My Line Telephone Number SUB-UGN :PS Sub Line User Group Number (Maximum 16 digits) SUB-TLN :PS Sub Line Telephone Number (Maximum 16 digits)
NDA-24301 CHAPTER 5 Page 283 Revision 1.0 4. DATA SHEET PS Multiline Data Assignment Sheet PS MY LINE USER GROUP NUMBER (MY-UGN)PS MY LINE TELEPHONE NUMBER (MY-TLN)PS SUB LINE USER GROUP NUMBER (SUB-UGN)PS SUB LINE TELEPHONE NUMBER (SUB-TLN)REMARKS