NEC Neax 2400 Ipx Wireless System Manual

							CHAPTER 5 NDA-24301
Pag e 2 44
Revision 1.0
4. DATA SHEET
Visitor PS Data for Local Data Memory Assignment Sheet
USER 
GROUP 
NUMBER 
(UGN)TENANT 
(TN)START NUMBER of 
TELEPHONE
NUMBER
(TELN START)END NUMBER of 
TELEPHONE
NUMBER
(TELN START)START NUMBER of 
VISITOR PS
STATION NUMBER
(VPSTN START)END NUMBER of 
VISITOR PS
STATION NUMBER
(VPSTN END)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 
						

							NDA-24301 CHAPTER 5
Page 245
Revision 1.0
AVPDN  : Assignment of Telephone Number for Visitor PS for Network Data Memory
1. GENERAL
This command is used to continuously assign the Visitor PS data in Network Data Memory.
2. PRECAUTIONS
1. This command is used in the Network Control Node.
2. This command is equal to APSD + ALGNN + ALGSN.
3. DATA ENTRY INSTRUCTIONS
TELN STARTUGNTNTELN END
VPSTN STARTVPSTN END USER GROUP
NUMBER
(UGN)
1: fixedFUSION
POINT
CODE
(FPC)TENANT
(TN)START NUMBER OF 
TELEPHONE NUMBER
MAX: 16 digitsEND NUMBER OF 
TELEPHONE NUMBER
MAX: 16 digits
START NUMBER OF 
Visitor PS
STATION NUMBER
MAX: 6 digitsEND NUMBER OF 
Visitor PS
STATION NUMBER
MAX: 6 digits
Enter 1 (fixed). Enter Tenant Number. Enter the first number 
of Telephone Number.
Enter the first number of
 
Visitor PS station number.
FPC
Enter Fusion
Point Code.
Enter the last number of 
Visitor PS station number.Enter the last number
 of Telephone Number. 
						

							CHAPTER 5 NDA-24301
Pag e 2 46
Revision 1.0
4. DATA SHEET
Visitor PS Data for Local Data Memory Assignment Sheet
USER 
GROUP 
NUMBER 
(UGN)FUSION 
POINT 
CODE
(FPC)TENANT 
(TN)START NUMBER 
of TELEPHONE
NUMBER
(TELN START)END NUMBER of 
TELEPHONE
NUMBER
(TELN START)START NUMBER of 
VISITOR PS
STATION NUMBER
(VPSTN START)END NUMBER of 
VISITOR PS
STATION NUMBER
(VPSTN END)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 
						

							NDA-24301 CHAPTER 5
Page 247
Revision 1.0
ASFC  : Assignment of Service Feature Restriction Class
1. GENERAL
This command is used to assign the Service Feature Restriction Class (SFC) for the Service Feature Index (SFI).
2. PRECAUTIONS
This part describes only the content of the command added in the PCS system. For more details, refer to the
“Office Data Specification.”
3. DATA ENTRY INSTRUCTIONS
0    1    2     3     4    5     6     7    8     9    10  11   12   13  14    15
RESTRICTION DATA (RES) is assigned in the squares where SFI and SFC 
cross. When unassigned, Restriction Data corresponding SFI recognized 0 
(Restriction status).
     0 = Restricted                                        1 = Allowed
SFI
Enter the SFI referring to Table 5-2
D/N
1 = Day mode
2 = Night mode
TENANT
NUMBER
( TN ) DAY/NIGHT
MODE
( D/N )
1 / 2SERVICE
FEATURE 
INDEX
( SFI )
1 - 255SERVICE RESTRICTION CLASS 
						

							CHAPTER 5 NDA-24301
Pag e 2 48
Revision 1.0
Note:Refer to the “Office Data Specification” regarding this data
Table 5-2  SFI
SFI SERVICE FEATURE
1~146Note 
147 C.F-PS Incoming Incomplete
148~255
Note  
						

							NDA-24301 CHAPTER 5
Page 249
Revision 1.0
4. DATA SHEET
DAY /NI GHT
MODE 
(D/N)
1/2TENANT
NUMBER
(TN)SERVICE
FEATURE
INDEX
(SFI)
1-255SERVICE RESTRICTION CLASS
0123456789101112131415 
						

							CHAPTER 5 NDA-24301
Pag e 2 50
Revision 1.0
ASPA  : Assignment of Special Access Code
1. GENERAL
This command is used to determined the kind of service and its Access Code to be executed.
List Up Command: LSPA
2. PRECAUTIONS
This part describes only the content of the command added in the PCS system. For more details, refer to the
“Office Data Specification”. 
						

							NDA-24301 CHAPTER 5
Page 251
Revision 1.0
3. DATA ENTRY INSTRUCTIONS
Access code (Max. 6 digits)
TENANT
NUMBER
( TN )ACCESS CODE
( ACC )
MAX. 6 DIGITSCONNECTION STATUS
ACC
CI
N = Normal service
H = Hooking service
B = Busy service
INDEX
( CI )KIND OF
SERVICE ( SRV )
SRV
STN = Station
SSCA = Service code appendix
OGCA = Outgoing call with route advance
LCR = Least cost routingSSC = Service code 
OGC= Outgoing call 
UNIF = Office termination
ANNC = Announcement service-single announcement 
ANNCM = Announcement service-multiple announcement 
PAGA = Paging answer LCRS= Register sender LCR
PAGC = Paging cancel 
						

							CHAPTER 5 NDA-24301
Pag e 2 52
Revision 1.0
When SRV = SSCA (Service code appendix) is assigned; 
NND appears when SIDA=97 (Call Hold Conference).
The number of digits for an access code should be assigned in NND. NND
SERVICE INDEX  A ( SIDA ) 1 - 255 NECESSARY DIGIT ( NND ) 1 - 6
1-100Note
101
102C.F-PS Incoming Incomplete: Set
C.F-PS Incoming Incomplete: Cancel
103~107
Note
SIDA
SIDA Service Name
108
109
110~113
114
115
116~255Number Sharing : Set
Number Sharing : Cancel
Call Forwarding-Dropped Calls : Set
Call Forwarding-Dropped Calls : Cancel
Note Note
Note:  See the “Office Data Specification” regarding this data. 
						

							NDA-24301 CHAPTER 5
Page 253
Revision 1.0
4. DATA SHEET
 SRV=SSCA Service code Appendix
Note:Refer to the “Office Data Specification” regarding this data.
TENANT
NUMBER
(TN)ACCESS CODE
(ACC)
MAXIMUM
6 DIGITSCONNECTION
STATUS 
INDEX
(CI) N/H/BKIND OF
SERVICE
(SRV)SERVICE
FEATURE
INDEX
(SIDA)
1 - 255NUMBER
OF NEC-
ESSARY
DIGITS 
(NND)SERVICE CONTENTS
1
100
Note 
NNormal
SSCA 101Call Forwarding Incoming 
Incomplete Set H Hooking
BBusy
NNormal
SSCA 102
Incoming Incomplete Cancel
H Hooking
BBusy
103
107
Note 
NNormal SSCA 108Number Sharing; Set
NNormal SSCA 109
Number Sharing; Cancel
110
113
Note 
NNormal SSCA 114Call Forwarding-Dropped 
Calls ; Set
NNormal SSCA 115
Call Forwarding-Dropped 
Calls ; Cancel
116
255
Note 
~
~
~
~