NEC Neax 2400 Ipx Wireless System Manual

							CHAPTER 5 NDA-24301
Pag e 2 24
Revision 1.0
PS NUMBER TYPE
( TYPE )
1 - 3PS NUMBER
( PS NO. )NETWORK 
NUMBER 
( NWN )
1 - 65535COUNTRY
 NUMBER 
( CTRN )
1 - 65535 ADDITIONAL
AREA
NUMBER
 ( ADERA )
1- 255SUB SYSTEM 
- IDENTIFY NO.
( SUB SYS 
- ID NO. )
ADERA NWN
The data assignment is not
required. Display only.The data assignment is not
required. Display only.The data assignment is not
required. Display only.CTRN
TYPE
1 : 12 Digits or Less (BCD)
2 : 13 Digits or Less (BCD)
3 : 13 Digits or Less (HEX)
Note:   Fixed to 2 PS NO.
This parameter for PSNO. TYPE Dependent
PSNO. TYPE : 1
Number of digit for PS number is Maximum 12 digits
PSNO. TYPE : 2
Number of digit for PS number is Maximum 13 digits
PSNO. TYPE : 3
Number of digit for PS number is Maximum 13 digits
PHANTOM EQUIPMENT NUMBER
 ( PHIN ) PHIN
The data assignment is not
required. Display only. Enter the data ranging from 1 to 3. Enter the data ranging
from 1 to 3. 
						

							NDA-24301 CHAPTER 5
Page 225
Revision 1.0
4. DATA SHEET
PS Operation Data Assignment Sheet (1/2)
UGN
(UGN)PS
TELEPHONE 
NUMBER
(LPSTN)PS KIND
(KIND)
1-3ROUTE 
RESTRICTION 
CLASS
(RSC)
1-15SERVICE
FEATURE 
RESTRICTION
 CLASS
(SFC)
1-15PS-ID
MAX.9 [DEC]INDIVIDUAL
PS NUMBER 
(IND-PS)
MAX.5 [BCD] 
						

							CHAPTER 5 NDA-24301
Pag e 2 26
Revision 1.0
PS Operation Data Assignment Sheet (2/2)
PS NUMBER NET-
WOR K 
NUMBER
 (NWN)
1-65535ADD
AREA
 
(ADERA)
1-255COUNTRY 
NUMBER
 (CTRN)
1-65535SUB
SYS-ID
1-10PHANTOM
EQUIPMENT
NUMBER
(PHIN)REMARKS
KIND1-3NUMBER
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2 
						

							NDA-24301 CHAPTER 5
Page 227
Revision 1.0
APDLN  : Download of PS Operation Data for Network Data Memory
1. GENERAL
This command is used to down load the PS operation data to D
term-PS/PSII in Network.
Download of PS operation data is executed by clicking the “DownLoad” button of this command.
List Up Command: LPDLN
2. PRECAUTIONS
1. This command is used in the Network Control Node.
2. PS must be in the node in which the PS is assigned with APSD command and in the least Calling Area No.’s
Area of PCN that the PS belongs to at the first time of downloading.
Note 1:If the above area’s ZTs are assigned by ACSDN but no ZTs in that Area are activated, download fails.
Note 2:If there are no ZTs  assigned  by ACSDN command in the node in which the PS is assigned with APSD and
in the PCN that the PS belongs to, the PS must be in the least calling Area No.’s Area  of PCN that the PS
belongs to in Fusion Network at the first time of downloading.
3. After the PS registers the location, the PS does not need to be in (2) Area.
4. After change of PS Number (not mandatory), click Download Button.
3. DATA ENTRY INSTRUCTIONS
UGN
(UGN)PS TELEPHONE NUMBER
(LPSTN)
PS TELEPHONE NUMBER
Access code (Max. 16 digits) 
						

							CHAPTER 5 NDA-24301
Pag e 2 28
Revision 1.0
After assigning above data, the following data is automatically displayed.
PS KIND
( KIND )
1 - 7ROUTE RESTRICTION
CLASS
( RSC )SERVICE FEATURE
CLASS
( SFC )PS - IDENTIFY
( PS - ID )
1 - 268435455INDIVIDUAL PS
NUMBER
( IND - PS )
term
term
RSC
The data assignment is not
required. Display only. PS - ID
IND - PS
1 = V1PS (Not used)
2 = V2PS (Not used)
3 = Standard PS (Not used)
4 = Visitor PS (Not used)  
5 = D
term PS
6 = Dterm PSIIKINDThe data assignment is not
required. Display only.
The data assignment is not
required. Display only.  The data assignment is not
required. Display only. 
The data assignment is not
required. Display only.  SFC
7 = D
term PSII Subline
PS NUMBER TYPE
( TYPE )
1 - 3PS NUMBER
( PS NO. )NETWORK 
NUMBER 
( NWN )
1 - 65535COUNTRY
 NUMBER 
( CTRN )
1 - 65535 ADDITIONAL
AREA
NUMBER
 ( ADERA )
1- 255SUB SYSTEM 
- IDENTIFY NO.
( SUB SYS 
- ID NO. )
ADERA NWN
The data assignment is not
required. Display only.The data assignment is not
required. Display only.CTRN
TYPE
1 : 12 Digits or Less (BCD)
2 : 13 Digits or Less (BCD)
3 : 13 Digits or Less (HEX)
Note:  Fixed to 2PS NO.
This parameter for PSNO. TYPE Dependent
PSNO. TYPE : 1
Number of digit for PS number is Maximum 12 digits
PSNO. TYPE : 2
Number of digit for PS number is Maximum 13 digits
PSNO. TYPE : 3
Number of digit for PS number is Maximum 13 digits
PHANTOM EQUIPMENT NUMBER
 ( PHIN ) PHINThe data assignment is not
required. Display only.
Enter the data ranging from
 1 to 3.Enter the data ranging from 1 to 3.
The data assignment is not
required. Display only. 
						

							NDA-24301 CHAPTER 5
Page 229
Revision 1.0
4. DATA SHEET
PS Operation Data Assignment Sheet (1/2)
UGN
(UGN)PS
TELEPHONE 
NUMBER
(LPSTN)PS KIND
(KIND)
1-3ROUTE 
RESTRICTION
 CLASS
(RSC)
1-15SERVICE 
FEATURE 
RESTRICTION
 CLASS
(SFC)
1-15PS-ID
MAX.9 [DEC]INDIVIDUAL
PS NUMBER 
(IND-PS)
MAX.5 [BCD] 
						

							CHAPTER 5 NDA-24301
Pag e 2 30
Revision 1.0
PS Operation Data Assignment Sheet (2/2)
PS NUMBER NET-
WOR K 
NUMBER
 (NWN)
1-65535ADD
AREA
 
(ADERA)
1-255COUNTRY 
NUMBER
 (CTRN)
1-65535SUB
SYS-ID
1-10PHANTOM
EQUIPMENT
NUMBER
(PHIN)REMARKS
KIND1-3NUMBER
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2 
						

							NDA-24301 CHAPTER 5
Page 231
Revision 1.0
APSD  : Assignment of PS Operation Data for DM
1. GENERAL
This command is used to assign, delete and display the PS operation data. This command assignment makes the
PS in operation.
List Up Command: LPSD
2. PRECAUTIONS
1. PS STN (PS Station Number) should coincide with the station numbering plan.
2. PS-ID is the information indigenous to each PS (PS-ID is written on each PS terminal).
3. When deleting the PS operation data, the number cannot be deleted if the Phantom station number or PS
Telephone Number is assigned. 
						

							CHAPTER 5 NDA-24301
Pag e 2 32
Revision 1.0
3. DATA ENTRY INSTRUCTIONS
When KIND = 4 is assigned (Visitor PS):
When KIND = 5 or 7 is assigned (D
term PS or Dterm PSII Subline): 
TENANT
NUMBER
(TN)PS STATION
NUMBER
(PS STN)
MAX. 5 DIGITS
1 = V1PS (Not used)
2 = V2PS (Not used)
3 = Standard PS (Not used)
4 = Visitor PS (Not used)  
5 = D
term PS
6 = Dterm PSIIKIND
PS STN
Enter the PS station number
(Max. 5 digits)PS KIND
(KIND)
1 - 77 = Dterm PSII Subline
TN
Enter the Tenant Number
RSC
Enter the Route Restriction
Class.
PHINThe data assignment is not required.
Display only.
ROUTE RESTRICTION
CLASS
(RSC)PHANTOM EQUIPMENT
NUMBER
(PHIN)
TYPE
1 : 12 Digits or Less (BCD)
2 : 13 Digits or Less (BCD)
3 : 13 Digits or Less (HEX) 
PS NO.
This parameter for PS NO. TYPE Dependent
PS NO. TYPE : 1
Number of digit for PS number is Maximum 12 digits
PS NO. TYPE : 2
Number of digit for PS number is Maximum 13 digits
PS NO. TYPE : 3
Number of digit for PS number is Maximum 13 digits ROUTE RESTRICTION
CLASS
(RSC)SERVICE FEATURE
CLASS
(SFC)PS - IDENTIFY
(PS-ID)
1 - 268435455PS NUMBER TYPE
(TYPE)
1 - 3PS NUMBER
(PS NO.)
SFC
Enter the Service Feature Class
PS-ID
Enter the PS - Identify 
Enter the Route Restriction classRSC
The data assignment is not
PHANTOM EQUIPMENT
NUMBER
(PHIN)
required. Display only.PHIN 
						

							NDA-24301 CHAPTER 5
Page 233
Revision 1.0
When KIND = 6 is assigned  (Dterm PSII): 
Enter the Additional AreaADERA
Number.
TYPE
1 to 3.
2 : 13 Digits or Less (BCD)
3 : 13 Digits or Less (HEX) 
PS NO.
Enter the data ranging from 1 to 3.
This parameter for PS NO. TYPE Dependent
PS NO. TYPE : 1
Number of digit for PS number is Maximum 13 digits. PS NO. TYPE : 2
Number of digit for PS number is Maximum 13 digits.ROUTE RESTRICTION
CLASS
(RSC)SERVICE FEATURE
CLASS
(SFC)PS - IDENTIFY
(PS-ID)
1 - 268435455PS NUMBER TYPE
(TYPE)
1 - 3
PS-ID
Enter the PS - Identify.  Enter the Route RestrictionRSC
 Class.
Enter the Service FeatureSFC
 Class.
1 : 12 Digits or Less (BCD) Enter the data ranging from
PS NUMBER
(PS NO.)NETWORK NUMBER
(NWM)ADDITIONAL
(ADERA)
1 - 255COUNTRY NUMBER
(CTRN)
1 - 65535
Enter the Network Number.NWNCTRN
Enter the Country Number.
1 - 65535AREA
NUMBER
Number of digit for PS number is Maximum 12 digits.
PS NO. TYPE : 3
Enter the Additional AreaADERA
Number.
SUB SYSTEM
(SUB SYS-ID NO.)SUB SYSTEM
(SUB SYS-ID)PHANTOM EQUIPMENT
(PHIN)
1 - 268435455NUMBER
Enter the Additional AreaADERA
Number.
Enter the Additional Area
ADERA
Number.Enter the Sub System-Identify.SUB SYS-ID
The data assignment is not required.PHIN
Display only. Enter the Sub System-IdentifySUB SYS-ID NO.
Number.
-IDENTIFY NO.
0-10-IDENTIFY 1-10