NEC Neax 2400 Ipx Wireless System Manual
Have a look at the manual NEC Neax 2400 Ipx Wireless System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 6 NDA-24301 Pag e 3 24 Revision 1.0 SYSTEM OPERATION AND MAINTENANCE 3. Detail of Each Message a. “25-J” ZT Operation Start b. “25-K” ZT Set Up NGDetail message data 1: XX XX 00 00 00 00 00 00 - Detail message data 1: XX XX XXXX00 00 00 00 - Set UP NG KIND 00: ZT Restart Process 01: ZT Status Adjustment 02: ZT Bch Status Adjustment Set UP NG Factor 00~04 : Not Used. 05~08 : System-ID down load processing NG. 09~0A : System-ID down load processing timeout. 0B~0D : ZT Data down load processing NG. 0E~10 : ZT Data down load processing timeout. 11 : CS-ID setting NG 12 : CS-ID setting timeout. 13 : Carrier decision order processing NG 14 : Carrier decision order processing timeout. 15~16 : Not Used. 17 : ZT make busy processing NG 18 : ZT make busy processing timeout. 19 : B channel make busy/cancel processing NG. 1A : B channel make busy/cancel processing timeout. 1B : B channel initialization processing NG 1C : B channel initialization processing timeout. 1D~1F : Not Used. 20 : ZT operation parameter change processing NG. 21 : ZT operation parameter change processing T.O. 22 : ZT Status request processing NG. 23 : ZT Status request processing timeout. 24~ : Not Used. Detected ZT GL MG U ZT which sends notification GL MG U
NDA-24301 CHAPTER 6 Page 325 Revision 1.0 SYSTEM OPERATION AND MAINTENANCE c. “25-L” ZT Fault 1: XX XX XXXX XX XX00 00 - Additional information Fault meaning 00: Fault report receive - Power ON execute 01: Fault report receive - Line Watchdog Detect 02: Fault report receive - Air Watchdog Detect 03: Fault report receive - Line Soft Detect 04: Fault report receive - Air Soft Detect 05: Fault report receive - Line-Air Detect 06: Fault report receive - LCCH Send Time Out 10: ZT Operation Stop 20: ZT Period Diagnosis NG - Time Out 21: ZT Period Diagnosis NG - Retry-out 22: ZT Period Diagnosis NG - SYS-ID unmatch 23: ZT Period Diagnosis NG - Additional ID Unmatch 24: ZT Period Diagnosis NG - ZT Status Unmatch Additional information XX XX PBX information 00: Inactive 01: Make busy 02: In Operation ZT information 00: Inactive 01: Make busy 02: In Operation 25: ZT Period Diagnosis NG - ZT Bch Status Unmatch Additional information XX XXXX PBX information 00: In Operation - idle 01: In Operation - busy 02: Make Busy ZT information 00: In Operation - idle 01: In Operation - busy 02: Make Busy Detected Bch 01: B1 02: B2 03: B3 Detected ZT GL MG U
CHAPTER 6 NDA-24301 Pag e 3 26 Revision 1.0 SYSTEM OPERATION AND MAINTENANCE d. “25-M” ZT Fault recover 1: XX XX XXXX XX XX00 00 - Additional information Recover meaning 80: ZT Trouble Notification Recover 20: Fixed Period Diagnosis NG ZT Status Discrepant Recover Additional information XX XX PBX information 00: Inactive 01: Make busy 02: In Operation ZT information 00: Inactive 01: Make busy 02: In Operation 21: Fixed Period Diagnosis NG ZT Bch Status Discrepant Recover Additional information XX XXXX PBX information 00: In Operation - idle 01: In Operation - busy 02: Make busy ZT information 00: In Operation - idle 01: In Operation - busy 02: Make busy Detected Bch 01: B1 02: B2 03: B3 Detected ZT GL MG U
NDA-24301 CHAPTER 6 Page 327 Revision 1.0 SYSTEM OPERATION AND MAINTENANCE e. “25-N” Carrier Fault f. “26-L” WIRELESS SYSTEM Failure Report1: XX XX XX XX XX XX XX XX Additional information (For NEC Engineer) Fault meaning 00:Carrier Close- 01:Carrier Change Detected ZT 1: XX XX XX XX XX00 - Additional information (For NEC Engineer) Fault Kind 01: ZT operation timer Write NG 02: ZT operation timer Read NG GL MG U
CHAPTER 6 NDA-24301 Pag e 3 28 Revision 1.0 This page is for your notes.