NEC Neax 2400 Ipx Wireless System Manual

							CHAPTER 5 NDA-24301
Pag e 2 64
Revision 1.0
4. DATA SHEET
  TYPE=1 (LENS is used to specify the Telephone number.)
TYPEUSER GROUP
NUMBER
(UGN)TELEPHONE NUMBER
(TELN)LINE EQUIPMENT
NUMBER
(LENS)REMARKS
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11 
						

							NDA-24301 CHAPTER 5
Page 265
Revision 1.0
TYPE=2 (STN is used to specify the Telephone number.)
TYPEUSER GROUP
NUMBER
(UGN)TELEPHONE NUMBER
(TELN)TENANT 
NUMBER
(TN)STATION 
NUMBER
(STN)REMARKS
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21 
						

							CHAPTER 5 NDA-24301
Pag e 2 66
Revision 1.0
ALGSN  : Assignment of Telephone Number Data for NDM
1. GENERAL
This command is used to assign the related data for the Telephone Number (TELN) corresponding to the
physical station. The data assigned by this command is written in Network Data Memory (NDM) of the Network
Control Node (NCN), updating the NDM at each Local Node (LN). 
List Up Command : LLGSN
2. PRECAUTIONS
1. The ALGSN command is used to assign the Telephone Number (TELN) for a Network Control Node
(NCN).
2. TYPE parameter allows user to choose the programming method of physical station. 
TYPE = 1 (LENS) : Telephone number is to be given to the LENS 
TYPE = 2 (STN) : Telephone number is to be given to the station
3. The system data assignment (ASYDN, SYS 1, INDEX 514, bit1=1) is needed to provide the Network Data
Memory (NDM).
4. When the parameter “TYPE” is 1 (LENS is used to specify the physical station number), the assignment of
the Fusion Point Code (FPC) entered by the AFMU command is required. 
5. When deleting the telephone number, the user must first delete the data concerned with Group Calling
Conference.
6. For more details, see the “Fusion Network System Manual”. 
						

							NDA-24301 CHAPTER 5
Page 267
Revision 1.0
3. DATA ENTRY INSTRUCTIONS
 When assigning TYPE = 1 (LENS is used to specify the Telephone number) 
When assigning TYPE = 2 (STN is used to specify the Telephone number) 
TYPE
1/2USER GROUP 
NUMBER
(UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSLINE EQUIPMENT 
NUMBER 
(LENS)FUSION POINT 
CODE
(FPC)
1-253
115
11
4 0 0 0   00 0 0 0   1 1
TYPE
1 = LENS is used to specify the Telephone number
2= STN is used to specify the Telephone number
LENS
LENS of the physical station
UGN
1 = User Group Number 1 (Fixed)
TELN
Telephone number assigned by
the ALGNN command.
FPC
Fusion Point Code (FPC) of the
designated LENS. FPC is assigned
by the AFMU command.
TN
Tenant number of the physical
station
TYPE
1/2USER 
GROUP 
NUMBER
(UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSTENANT
NUMBER 
(TN)STATION
NUMBER
(STN)
21 11
21400 002 5 645
TYPE
1 = LENS is used to specify the Telephone number
2= STN is used to specify the Telephone numberSTN
Station number of the physical station
UGN
1 = User Group Number 1 (Fixed)
TELN
Telephone number assigned by
the ALGNN command. 
						

							CHAPTER 5 NDA-24301
Pag e 2 68
Revision 1.0
4. DATA SHEET
 LENS is used to specify the Telephone number (TYPE = 1) 
TYPEUSER GROUP 
NUMBER 
(UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSLINE EQUIPMENT 
NUMBER 
(LENS)FUSION POINT 
CODE
(FPC)
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11 
						

							NDA-24301 CHAPTER 5
Page 269
Revision 1.0
 STN is used to specify the Telephone number (TYPE = 2)
TYPEUSER GROUP 
NUMBER (UGN)TELEPHONE NUMBER (TELN)
MAX. 16 DIGITSTENANT 
NUMBER
(TN)STATION
NUMBER(STN)REMARKS
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21 
						

							CHAPTER 5 NDA-24301
Pag e 2 70
Revision 1.0
ALRTN  : Assignment of Logical Route for Network Data Memory
1. GENERAL
This command is used to allocate the Logical Route Number which is the unique number of the external trunk
route in the Fusion network.
List Up Command : LLRTN
2. PRECAUTIONS
1. Logical Route Number allocation is required for the Fusion network only.
2. For more detailed information, see the “Fusion System Manual”.
3. DATA ENTRY INSTRUCTIONS
NUMBER (LGRT) LOGICAL ROUTE   FUSION POINT
CODE (FPC)
1-253EXTERNAL ROUTE
NUMBER (RT)
1-255REMARKS1-899
Assign all external routes including
dummy routes in the Fusion network.
RT FPCAssign FPC of the each node to
which the external trunk route
belongs.
LGRTLGRT is the unique number allocated
to each external trunk route in the Fusion 
network. 
						

							NDA-24301 CHAPTER 5
Page 271
Revision 1.0
4. DATA SHEET
LOGICAL ROUTE
NUMBER (LGRT)
1-899FUSION POINT 
CODE (FPC)
1-253EXTERNAL 
ROUTE NUMBER 
(RT)
1-255REMARKS 
						

							CHAPTER 5 NDA-24301
Pag e 2 72
Revision 1.0
ANSDL  : Assignment of Number Sharing Data for Local Data Memory
1. GENERAL
This command is used to assign and delete Main Station and Sub Station data for Number Sharing service.
2. PRECAUTIONS
1. This command is available for Series 7300 or later software.
2. This command is used for the Local Node.
3. For detailed information on Number Sharing service, see “Number Sharing” in Chapter 4.
3. DATA ENTRY INSTRUCTIONS
M-UGN : Main User Group Number
S-UGN : Sub User Group Number
M-TELN : Main Telephone Number (Maximum 16 digits)
S-TELN : Sub Telephone Number (Maximum 16 digits)
OD : Output External Equipment 
Note 
0 : Only Main Telephone Number is used for SMDR, MCI and VPS Mail Box Number.
1 : Both Main Telephone Number and Sub Telephone Number are used for SMDR, MCI and VPS
Mail Box Number.
Note:When this parameter is set to “0”, the mail box for the Sub Station must be deleted.
MW : Message Waiting Control
0 : Message Waiting Control for Main and Sub Telephone Numbers
1 : Message Waiting Control for Main Telephone Number Only
LM : Service Conrol
0 : Number Sharing 
						

							NDA-24301 CHAPTER 5
Page 273
Revision 1.0
4. DATA SHEET
Number sharing Data Assignment Sheet (1/2)
MAIN USER
GROUP
NUMBER
(M-UGN)SUB USER
GROUP
NUMBER
(S-UGN)MAIN
TELEPHONE
NUMBER
(M-TELN)
MAX. 16 DIGITSSUB
TELEPHONE
NUMBER
(S-TELN)
MAX. 16 DIGITS