HP Photosmart C5383 User Manual

							
2.In the Edit Photos menu, press the up arrow or down arrow button until  Frame is
highlighted, and then press  OK.
3. Press the left arrow or right arrow  button to scroll through the frames.
4. When the frame you want is highlighted, press  OK.
The selected frame is applied to the photo and shown by itself on the display.
Related topics
“
Print photos” on page 72
Adjust the brightness of your photos
You can adjust the brightness of a photo so that it prints lighter or darker than the original
photo you took with your digital camera.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo. The changes will not be saved on the memory card.
To adjust the brightness
1. Press the Menu button on the photo selection screen.
2.In the Edit Photo menu, press the up arrow or down arrow button to highlight
Brightness , and then press  OK.
3. Press the left arrow or right arrow button to increase or decrease the brightness of
the photo.
The current brightness selection is indicated by the vertical line on the slidebar.
4. When you are done adjusting brightness, press  OK.
Related topics
•“
Print photos” on page 72
•“
Make reprints of your photos” on page 95
Apply special color effects to your photos
You can apply special color effects to a photo so that it prints with a sepia, hand-tinted,
or black-and-white finish.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo. The changes will not be saved on the memory card.
To change the color effects
1. Press the Menu button on the photo selection screen.
Chapter 8
78 Use the photo features
Photos
 
						

							
2.In the Edit Photos menu, press the up arrow or down arrow button to highlight  Color
Effect , and then press  OK.
3. Press the up arrow or down arrow button to select one of the following color effect
options, and then press  OK:
No EffectDoes not apply any special color effects to your photo.
Black & WhitePrints the photo in black and white.
SepiaApplies brown tones, similar to photos produced in the early 1900s, to
your photo.
AntiqueApplies brown tones along with some pale colors to your photo. With
this option, your photo will look like it was hand-tinted.
Related topics
•“
Print photos” on page 72
•“
Make reprints of your photos” on page 95
Edit photos using the control panel 79
Photos
 
						

							
Chapter 8
80 Use the photo features
Photos
 
						

							
9 Use the scan features
Scanning is the process of converting text and pictures into an electronic format for your
computer. You can scan almost anything (photos, magazine articles and text documents)
on the HP All-in-One.
You can use the scanning features of the HP All-in-One to do the following:
• Scan text from an article into your word processor and quote it in a report.
• Print business cards and brochures by scanning a logo and using it in your publishing
software.
• Send photos to friends and relatives by scanning your favorite prints and including
them in e-mail messages.
• Create a photographic inventory of your house or office.
• Archive treasured photos in an electronic scrapbook.
This section contains the following topics:
•
Scan an image
•
Edit a scanned image
•
Edit a scanned document
•
Stop scanning
Scan an image
You can scan to a connected computer that has the HP Photosmart Software installed
or to a connected memory card or storage device.
NOTE: You can also use the software you installed with the HP All-in-One to scan
images. Using this software, you can edit a scanned image and create special projects
using a scanned image. For more information, see the software help.
This section contains the following topics:
•
Scan an original to a computer
•
Scan an original to a memory card
Scan an original to a computer
You can scan originals placed on the glass by using the control panel.
NOTE: To use the scan features, the HP All-in-One and computer must be
connected and turned on. The HP Photosmart Software must also be installed and
running on your computer prior to scanning. To verify that the HP Photosmart
Software is running on a Windows computer, look for the HP All-in-One icon in the
system tray at the lower right si de of the screen, near the time.
NOTE:Closing the  HP Digital Imaging Monitor  icon in the Windows system tray
can cause the HP All-in-One to lose some of its scan functionality. If this happens,
you can restore full functionality by restarting your computer or by starting the
HP Photosmart Software.
Scan an image 81
Scan
 
						

							
NOTE:When scanning, the HP Photosmart Software enables you to save an image
in the following file form ats: BMP, DCX, FPX, GIF, JPG, PCD, PCX, and TIF.
To scan to a computer
1.Load your original print side down on the right front corner of the glass.
2.Press  Start Scan  on the control panel.
3. Press the down arrow button to highlight  Scan to Computer, and then press OK.
4. The  Scan To  menu appears on the display. Press the down arrow button to select
the job shortcut you want to use, and then press  OK.
NOTE: Job shortcuts define scan parameters, such as the software application,
dpi, and color settings so you do not need to set them for each scan job.
5. Follow the onscreen prompts to save the scan to your computer.
Scan an original to a memory card
You can send the scanned image as a JPEG image to the memory card or storage device
that is currently inserted. This enables you to use the photo print options to print
borderless prints and album pages from the scanned image.
Chapter 9
82 Use the scan features
Scan
 
						

							
To save a scan to the memory card or storage device
1.Make sure your memory card is inserted into the appropriate slot on the product, or
a storage device is connected to the front USB port.
2. Load your original print side down on the right front corner of the glass.
3.Press  Start Scan .
4. Press the down arrow button to highlight  Scan to Memory Card or Scan to USB
Flash Drive , and then press  OK.
The product scans the image and saves the file to the memory card or storage device
in the JPEG format.
Edit a scanned image
You can edit a scanned image, such as a photo or graphic, using the software you
installed with the HP All-in-One. Using this software, you can rotate or crop the image,
as well as adjust the brightness, contrast, and color saturation.
Related topics
“
Use the HP Photosmart Software” on page 14
Edit a scanned document
You can edit a scanned document using your Optical Character Recognition (OCR)
software. Scanning text using OCR software enables you to bring the content of magazine
articles, books, and other printed matter into your favorite word processor and many other
applications as editable text. Learning to use OCR software correctly is important if you
want to obtain the best results. Do not expect scanned text documents to be letter-perfect
the first time you use your OCR software. Using OCR software is an art that takes time
and practice to master.
Related topics
“
Use the HP Photosmart Software” on page 14
Edit a scanned document 83
Scan
 
						

							
Stop scanning
To stop scanning
▲Press Cancel on the control panel.
Chapter 9
84 Use the scan features
Scan
 
						

							
10 Use the copy features
The HP All-in-One enables you to produce high-quality color and black-and-white copies
on a variety of paper types, including transparencies. You can enlarge or reduce the size
of an original to fit a specific paper size, adjust the darkness of the copy, and use special
features to make high-quality copies of photos, including borderless copies.
TIP: For the best copy performance on standard copy projects, set the paper size
to  Letter  or A4, the paper type to  Plain Paper, and the copy quality to  Fast.
This section contains the following topics:
•
Make a copy
•
Preview your copy job
•
Change the copy settings for the current job
•
Change default copy settings
•
Perform special copy jobs
•
Stop copying
Make a copy
You can make quality copies from the control panel.
To make a copy from the control panel
1. Make sure you have paper loaded in the input tray.
Make a copy 85
Copy
 
						

							
2.Load your original print side down on the right front corner of the glass.
3.Press  Start Copy Black  or Start Copy Color  to begin copying.
Preview your copy job
After changing settings on the HP All-in-One for making a copy, you can preview an image
of the expected output on the display before starting the copy.
NOTE:To ensure an accurate preview, change the paper size and type to reflect
the actual paper you have loaded in the input tray. If you use the Automatic settings,
the onscreen preview might not accurately represent the output. Instead, the preview
will reflect what the output would be if the default paper type and size were loaded in
the input tray.
Previews appear when you select  Preview on the Copy Menu , or when you use the crop
feature to specify a specific area of the original to copy.
To preview your copy from the control panel
1. Press  OK when  Copy is highlighted on the Home Screen.
2. Press the Menu bu tton to select Copy Settings .
3.Change copy settings on the pr oduct to accurately reflect the copy you want to make.
4. Press the down arrow button to highlight  Preview, and then press  OK.
An image on the display shows how your copy will print.
5. Press  Start Copy Black  or Start Copy Color  to accept the preview and begin
copying.
Change the copy settings  for the current job
You can customize the copy settings of the HP All-in-One to handle nearly any copy task.
Chapter 10
86 Use the copy features
Copy
 
						

							
This section contains the following topics:
•
Set the number of copies
•
Set the copy paper size
•
Set the copy paper type
•
Change copy speed or quality
•
Adjust the lightness and darkness of your copy
Set the number of copies
You can set the number of copies from the control panel of the HP All-in-One or from the
HP Photosmart Software. This task explains how to set the number of copies from the
control panel only.
To set the number of copies from the control panel
1. Press  OK when  Copy is highlighted on the Home Screen.
2. Press the up arrow button to increase the number of copies, up to the maximum.
(The maximum number of copies varies by model.)
3. Press  Start Copy Black  or Start Copy Color .
Set the copy paper size
The HP All-in-One is set to detect the type of paper you are using automatically. For the
best results when copying photos, leave the  Paper Size set to Automatic , and load photo
paper in the HP All-in-One. You should only change the  Paper Size if you see print quality
issues using the  Automatic setting.
To set the paper size from the control panel
1. Press  OK when  Copy is highlighted on the Home Screen.
2. Press the Menu button to select  Copy Settings.
3.Press the down arrow button to highlight  Paper Size and then press  OK.
4. Press the down arrow button to highlight the appropriate paper size present in the
input tray, and then press  OK.
Set the copy paper type
The HP All-in-One is set to detect the type of paper you are using automatically. For the
best results when copying photos, leave the  Paper Type set to Automatic , and load
photo paper in the HP All-in-One. You should only change the  Paper Type if you see
print quality issues using the  Automatic setting.
Change the copy settings for the current job 87
Copy