Home > GE > Medical Monitor > GE S5 Owners Manual

GE S5 Owners Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual GE S5 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 GE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 368
    Add page 141 to Favourites
    image text
    Enable zoom 
    							 List of figuresiii
Document no. M1187335-004
Table of f igures
Figure 1 S/5  Frame for FM ...................................................................................................... ................................................................... 1
Figure 2 FM Monitor connection block diag ram .............................................................................................................................. 6
Figure 3 CPU board F-FM(W)-01 ................................................................................................... ........................................................... 7
Figure 4 CPU board F-FM(W)-00 ................................................................................................... ........................................................... 8
Figure 5 DC/DC Board ............................................................................................................ ...................................................................... 9
Figure 6 DC/DC board block diagram .............................................................................................. ...................................................10
Figure 7 AC/DC unit ............................................................................................................. ........................................................................11
Figure 8 Module bus cable unit .................................................................................................. ............................................................12
Figure 9 Interconnection board .................................................................................................. ...........................................................12
Figure 10 Display connection  board ......................................................................................................................................................13
Figure 11 Parts inside Front cover.............................................................................................. .............................................................13
Figure 12 External connecto rs of Frame for FM ................................................................................... ............................................15
Figure 13 Multi I/O adapter..................................................................................................... ....................................................................17
Figure 14 Inserting a battery ................................................................................................... ..................................................................47
Figure 15 Capacity indicator  on the battery..................................................................................... ..................................................47
    Add page 142 to Favourites
    image text
    Enable zoom 
    							Datex-Ohmeda S/5 FM
iv
Document no. M1187335-004
    Add page 143 to Favourites
    image text
    Enable zoom 
    							Frame for FM 1
Document no. M1187335-004
Introduction
This section provides information about th e maintenance and service of the following 
products:
•S/5  Frame for FM, F-FM. 
•Software Licenses L-FICU04, L- FICU04A. L-FICU06, L-FICU06A. 
•WLAN option F-FMW.
Figure 1 S/5  Frame for FM
    Add page 144 to Favourites
    image text
    Enable zoom 
    							Datex-Ohmeda S/5 FM
2
Document no. M1187335-004
1Specifications
1.1 Frame for FM
Dimensions
Height        302 mm (11.8 in)Handle Up 
  274 mm (10.7 in)Handle Down
Width        302 mm (11.8 in) Without modules
337 mm (13.3 in) With modules
Depth         143 mm (5.6 in) Without extension module
156 mm (6.1 in) With extension module 
200 mm (7.8 in) With extension and PSM modules
Weight 
FM 5.0 kg FM without modules, batteries included
FM + E-PSM 5.6 kg FM with PSM
FM + N-FCREC + E-PSM 6.6 kg FM with PSM and extension module with recorder and CO
2
1.1.1 Electrical requirements
Any fluctuations within the specified limits do not affect the performance.
Mains input Rated voltage     100 - 10% to 240  10% Vac 
Rated current  1.25A at 100V, 625mA at 240V
Rated frequencies  50/60Hz
Power consumption 150 VA
Ext. DC Input         
Voltage 10  - 16V
Current 6   A max
(External DC power for future use)
Cooling  Convection
1.1.2 Environmental requirements
Operating temperature 
   normal operation          10 to 40°C 50 to 104 °F
   while charging batteries 10 to 35°C 50 to 95 °F
Storage temperature -20 to +60°C -4 to 140 °F
Relative humidity 10 … 90%. Non-condensing
Atmospheric pressure  670 to 1060 mbar (500 to 800 mmHg, 670 to 1060 hPa)
1.2 LCD display
Display size10.4 in (diagonal)
Display type Active Matrix Color TFT LCD
Resolution SVGA 800x600
Number of waveforms Up to 6
Number of digit fields Up to 4
Display layout and co lorsUser-configurable
Horizontal viewing angles Left and right side 50°
    Add page 145 to Favourites
    image text
    Enable zoom 
    							Frame for FM 3
Document no. M1187335-004
Vertical viewing angles  Lower side 45°
Upper side 35°
Backlight cold cathode fluorescent lamp, replaceable
Backlight lifetime 40 000 h
Backlight intensity 250 Cd/m
2 typ.
Integrated Command Board with direct function ke ys, menu keys and ComWheel for selections and 
adjustments in menus. 
1.3 Batteries
Number of batteries 2
Battery type Exchangeable Lithium-Ion 
Voltage 11.1V (nominal)
Capacity 3.5 Ah
Capacity indicator Fuel gauge on monitor screen and on battery pack
Operation time up to 4.5 hours
Charge time 2.5 hours per battery pack 
Battery life 300 cycles to 50% capacity
Conditioning Manual
1.4 MemCards 
MemCard capacity6 MB minimum
Data storage capacity 2 days of continuous physiological data trends
Operating system Datalight ROM-DOS
File system MS-DOS compatible
MemCards PCMCIA-ATA compatible memory cards
1.5 Network
Connector typeRJ-45
Network type 10 Base-T
Isolation 1500 V, 60/50Hz, 1 min.
Network ID Network ID key and virtual network ID
Communication protocol DRI 01, 02 and 03 
Network Connectivity D-O Central and iCentral
Meets IEEE802.3 specifications (10MBASE-T)
Hospital grade approved data transformer
Coding element interface
1.6 Wireless Network, F-FMW
Type Built-in transceiver and antenna
Frequency range  Worldwide product covering 2.4 to 2.5 GHz, programmable for 
different country regulations
Data rate 11 Mbps per channel (max.) 
Output power 100 mW 
Data transmission  IEEE 802.11b compliant, Direct Sequence Spread Spectrum (DSSS) 
Security Wired Equivalent Privacy (WEP) 40 and 128 bit encryption
    Add page 146 to Favourites
    image text
    Enable zoom 
    							Datex-Ohmeda S/5 FM
4
Document no. M1187335-004
1.7 Analog Outputs, direct ECG and synchronization
ECGFrom first user lead (ECG1)
Gain:  1 V/1mV ±20%
Delay: < 15 ms
DC offset: ±100 mV max.
Output range: ±4 V
Noise: 50 mVpp max.
Frequency response:  0.05 Hz to 40 Hz
InvBP From pressure channel P1
Gain:  10 mV/1 mmHg ±20%
Delay: < 35 ms
DC offset: ±100 mV
Output range:  -0.4 V to +3.2 V 
Noise:  50 mVpp max. 
The pacemaker pulses have been replaced with 2 ms/5  V fixed digital pulses at the ECG analog output for 
IABP or defibrillator equipment. A device that fulfils the requirements of the IEC 60601-1 standard can be 
connected to the defibrillator & IABP synchronization connector. There are no ot her limitations, because 
the signals of the connector are galvanically isolated  from patient applied part of the ECG and invasive 
blood pressure measurements.
Synchronization pulse  Pulse width 10 ms positive pulse
Delay < 35 ms (R-wave peak to
leading edge of pulse)
Amplitude CMOS compatible
3.5 V min. at 1 mA sourcing
0.5 V max. at 5 mA sinking
Output impedance  50 ohm
Current limit 10 mA
The signal requires input impedance of 100 k
1.8 Digital outputs 
Nurse call  Low State: 0 - 0.5V;  High State: 3.5 - 5V
Generated on red and yellow alarms
Serial Output  Asynchronous
Serial data interface, uses RS-232 standard
Baud rate max 115.2 kbps
Parity: None; Data bits: 8; Stop bit: 1
    Add page 147 to Favourites
    image text
    Enable zoom 
    							Frame for FM 5
Document no. M1187335-004
2 Functional description
2.1 Main components
2.1.1 Keyboards
User interface parts
Vertical and Horizontal Membrane keypad cont aining 20 keys. The keypads are foil membrane 
keypads. The keypads are connected to the UPI section of the CPU board. 
ComWheel is used for menu selection.
2.1.2 Display
The 10.4” LCD display with SVGA 800 x 600 reso lution has bright long live lamps and a wide 
viewing angle. 
NOTE: The LCD display backlight circuit runs on a  high voltage. Do not touch the inverter board 
or the backlight tube leads when powered.
Backlights
Replaceable backlight lamp unit consists of two  integrated cold cathode fluorescent lamps. 
The backlight lamp unit is driven  by a separate inverter board.
    Add page 148 to Favourites
    image text
    Enable zoom 
    							Datex-Ohmeda S/5 FM
6
Document no. M1187335-004
Figure 2 FM Monitor connection block diagram
FLEXIBLE MONITOR (FM)
CONNECTION BLOCK DIAGRAM
EXTERNAL
DC
SUPPLY
10-16.5VSMART
BATTERY A
Li-ION
9-12.6V SMART
BATTERY B
Li-ION
9-12.6VAC INLET
90-264Vac
47-63Hz
FILTER
BOARD
AC/DC
POWER
SUPPLY
DC/DC
BOARD
SW LOAD
PCMCIA
CARD
CF
WLAN
CARD
NETWORK
CONNECTOR
BOARD
NETWORK CONNECTOR
RJ-45 10BASE-T
DISPLAY
CONNECTION
BOARD
BACKLIGHT
INVERTER
LCD
DISPLAY
10.4"
SVGA
CCFL
BACKLIGHT
LAMPS
CPU
BOARD
MULTI
I/O
ADAPTER
KEYBOARD (REMCO)
CONNECTOR
NETWORK ID
CONNECTOR
SERIAL
CONNECTOR
MULTI I/O CONNECTOR
INTERCONNECTION
BOARD
SYNC
CONNECTOR
UNIT DEFIB &
IABP
SYNC
CONNECTOR
DIS
CONNECTORMODBUS
CABLE
UNIT
MODULEBUS
CONNECTOR
COMWHEEL
VERTICAL
CONTROL
PANEL
HORISONTAL
CONTROL
PANEL USER
INTERFACE
BOARD
POWER
INDICATOR
BOARDALARM
INDICATOR
BOARDALARM
LIGHT
BOARD
= I/O CONNECTOR
= CABLE OR WIRES
15.9V
+/-2%
XY XY
CW
CW & XY
POW LEDS
POW  LEDS
ALARM LEDS
ALARM LEDS
POW  LEDS VMOD
MODBUS DATA
VMOD
MODBUS DATA
VMOD
ANALOG
OUT
VSYS_OUT &
POW  LEDS VMOD VSYS_OUT
+3.3V & +5V PMC DATA
EXTDC BAT1
BAT2SMBUS
SMBUS SMBUS
BAT1
BAT2
EXTDC
KB DATAID DATA
SERIAL DATA
ETHERNET DATA
MODBUS DATAALARM LEDS
CW  & XYPMC DATA
KB DATA
ID DATA
SERIAL DATA
+3.3V & +5V
= PIN-TO-PIN CONNECTION
BACKLIGHT
CTRL
BACKLIGHT CTRL
SPEAKER
GREEN GREENORANGE        RED YELLOW
RED / YELLOWM1035159_00.vsd
FLEXIBLE MONITOR (FM)
CONNECTION BLOCK DIAGRAM
EXTERNAL
DC
SUPPLY
10-16.5VSMART
BATTERY A
Li-ION
9-12.6V SMART
BATTERY B
Li-ION
9-12.6VAC INLET
90-264Vac
47-63Hz
FILTER
BOARD
AC/DC
POWER
SUPPLY
DC/DC
BOARD
SW LOAD
PCMCIA
CARD
CF
WLAN
CARD
NETWORK
CONNECTOR
BOARD
NETWORK CONNECTOR
RJ-45 10BASE-T
DISPLAY
CONNECTION
BOARD
BACKLIGHT
INVERTER
LCD
DISPLAY
10.4"
SVGA
CCFL
BACKLIGHT
LAMPS
CPU
BOARD
MULTI
I/O
ADAPTER
KEYBOARD (REMCO)
CONNECTOR
NETWORK ID
CONNECTOR
SERIAL
CONNECTOR
MULTI I/O CONNECTOR
INTERCONNECTION
BOARD
SYNC
CONNECTOR
UNIT DEFIB &
IABP
SYNC
CONNECTOR
DIS
CONNECTORMODBUS
CABLE
UNIT
MODULEBUS
CONNECTOR
COMWHEEL
VERTICAL
CONTROL
PANEL
HORISONTAL
CONTROL
PANEL USER
INTERFACE
BOARD
POWER
INDICATOR
BOARDALARM
INDICATOR
BOARDALARM
LIGHT
BOARD
= I/O CONNECTOR
= CABLE OR WIRES
15.9V
+/-2%
XY XY
CW
CW & XY
POW LEDS
POW  LEDS
ALARM LEDS
ALARM LEDS
POW  LEDS VMOD
MODBUS DATA
VMOD
MODBUS DATA
VMOD
ANALOG
OUT
VSYS_OUT &
POW  LEDS VMOD VSYS_OUT
+3.3V & +5V PMC DATA
EXTDC BAT1
BAT2SMBUS
SMBUS SMBUS
BAT1
BAT2
EXTDC
KB DATAID DATA
SERIAL DATA
ETHERNET DATA
MODBUS DATAALARM LEDS
CW  & XYPMC DATA
KB DATA
ID DATA
SERIAL DATA
+3.3V & +5V
= PIN-TO-PIN CONNECTION
BACKLIGHT
CTRL
BACKLIGHT CTRL
SPEAKER
GREEN GREENORANGE        RED YELLOW
RED / YELLOWM1035159_00.vsd
\b	
\f

\b	

\f
\b
\b
	
\f



	
\f
\f\f
\b
!

#$	
\f
\f\f
\b
!

#$\b\f
#$*,
8:;<
\f



>

?

>



?\b

	



?


\f?



\f




\f?

\b 
\f


@\b\f


\f




;\f

\f


Q


;\f
	




	\f
>

\f


\b
	


\f

\f?

\b

\f




\f

	\f\b>
\b
\f

\f

\f






\f

\f
\bZ



\f



\f

	


\f
	


\f


	?;

\f

\f

   
;


\f

\f

    
\f





?
\f




	
\f




	
;\f



[\b>
\b
\f

[\b\b

\b?

#
\>$]
 
?
?\bZ\b

?\b 

? \b

	\b

	\b

? \b 	

	
\b\f
	

	
\b\f
	




\f
^
\f\bZ

? \b 	
 ^
\f
\::\bZ\b\ 	\b\f
\f \f
\f$	
	 	
\f
\f$
\f
\b\f\b\f

\b\f
\f;
\f\b\f
	
\b\f
	\b
? \bZ\b	\b\f
\b\f
\b\f

\b\f
\::\bZ\b\
[\b\f
\b
\f

;\f
\f

;\f\b\f



 


\b\b\b\b\b\b\b\b
 
?

\b>\b
?	:#^`be
    Add page 149 to Favourites
    image text
    Enable zoom 
    							Frame for FM 7
Document no. M1187335-004
2.1.3 CPU boardF-FM(W)-01
Figure 3 CPU board F-FM(W)-01
The board is based on AMD Élan SC520 microcontroller. Other features include a flat panel 
display controller, 10/100 Mbit/s Ethernet interface, PCMCIA interface, sound system and 
Renesas H8SX based UPI.
The CPU section takes care of the central processing.
The main features are:
•Élan SC520  processor
•Internal clock frequency 133MHz
•32 Mbytes SDRAM
•16+16 Mbytes flash memory
•32 Kbytes static RAM with real time clock
•4 channel UART:
3 serial channels with si gnals in AC logic level
 1 serial channel signals in RS232 level
•Programmable alarm sound generator
•PC-card slot
The SRAM with real-time clock is backed up by a lithium battery.
CAUTION Lithium battery on th e CPU board. Dispose of the battery in accordance with 
local environmental and wa ste disposal regulations.
Connectors
Interconnection board connector X3
Flat panel connector X7 (to display connection board)
Speaker connector X17
Analog output board connector  X4 (to sync connector board)
    Add page 150 to Favourites
    image text
    Enable zoom 
    							Datex-Ohmeda S/5 FM
8
Document no. M1187335-004
Ethernet connector X14 (network cable to network connector board)
System watchdog and voltage supervision
There is a voltage supervisor chip that controls  +1.2V, +2.5V, +3.3V and +5V internal operating 
voltages and it generates system reset if undervoltage situation occurs in monitored voltages. 
There is a separate watchdog supervisor chip that generates system reset if watchdog refresh 
period exceeds 1.6 seconds.
 F-FM(W)-00
Figure 4 CPU board F-FM(W)-00
The board is based on AMD 486DX4 micropro cessor and Radisys R400EX chip set. Other 
features include a flat panel display controller, 10 Mbit/s Ethernet interface, PCMCIA interface, 
sound system and Hitachi H8S based UPI.
The CPU section takes care of the central processing.
The main features are:
•486 processor
•Internal clock frequency 100MHz
•32 Mbytes DRAM
•8 Mbytes program flash memory
•32 Kbytes static RAM with real time clock
•4 channel UART:
 2 serial channels with si gnals in AC logic level
 2 serial channel signals in RS232 level
•Programmable alarm sound generator
•PC-card slot for software updates
The SRAM with real-time clock is backed up by a lithium battery.
CAUTION Lithium battery on th e CPU board. Dispose of the battery in accordance with 
local environmental and wa ste disposal regulations.
    All GE manuals Comments (0)