GE Logiq 7 Service Manual

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-55
8-2-10-12 UP-D897 Parameter (cont’d)
5.) Select  Density Adjust  tab, then ...
-Set  TONE1 into GAMMA
-Set  7 into Sharpness
Figure 8-119   Printing Preferences 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
8-56Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-10-13 Setting Report Printer
1.) Press UTILITY > SYSTEM  in Touch Panel.
2.) Click  PERIPHERAL > Printers.
3.) Find Printer to be used for REPORT, right-click and select  Set as Default Printer.
Figure 8-120   Printer Setup
Figure 8-121   Setting Default Printer 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-57
8-2-11 Functional Check
8-2-11-1 Service Platform
1.) Click on Utility > Service.  It will take about ten (10) seconds for activating.
Figure 8-122   Service 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
8-58Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-11-1 Service Platform  (cont’d)
2.) Make sure that CAPS  is OFF (should be dimmed)
 for password entry performed later.
3.) The Service Login window for Service Platform will be shown on the monitor display.
4.) Select GE Service  at the “Select User Level” field. 
5.) Enter the password for the Service Platform.
6.) Click on  Okay. Figure 8-123   Service Login
CAUTIONIf the Login window for Service Platform is not displayed on the monitor, the installation of the 
Service Platform has failed. Reload the application software or Base System Software (OS) + 
application software.  Contact a Technical Support for details.
Figure 8-124   User Level
OFFON 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-59
8-2-11-1 Service Platform (cont’d)
7.) Verify that the following screen (Service Platform) is displayed on the monitor.
8.) Verify that Service Platform Version is  2.2.0Q.
9.) Click on  x located at the upper right corner of the service platform screen to close the Service 
Platform and return to the scan panel.
8-2-11-2 Functional Checks for Probe Recognition 1.) Touch Scan button on the Touch Panel to return to the scan screen.
2.) Connect each probe to ensure that they are recognized.
3.) Check every probe in the following modes and ensure that no artifacts or no problems are found in: - B-mode
- Color FLow
- Pulsed Doppler
-M-mode
- CW (option)
4.) Install the removed parts in the reverse order of removal.
8-2-11-3 Calibration and adjustment No calibration or adjustments are needed after this part replacement. Figure 8-125   Service Platform
NOTICEWhen the service platform is NOT displayed, check if 
CAPS lock is selected.  The  CAPS should not be 
selected. 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
8-60Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-11-4 Functional Checks
Perform the following functional tests to confirm the system is operational before returning the system 
to the customer. If all are successful, include the following debrief script:
Table 8-8   Functional Tests
See 
Section
Functional TestDebrief Script
4-2-2-1 Power Up LOGIQ 7 Proprietary Service Manual, Direction 
2286865, Rev 14, Section  8-2. Equipment 
passed all required tests and is ready for use.
4-2-2-2
Power Up Sequence 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 9-1 - Overview 9-1
Chapter 9
Renewal Parts
Section 9-1
Overview
9-1-1 Purpose of Chapter 9
This chapter gives you an overview of Renewal Parts for LOGIQ™ 7.
Section 9-2
List of Abbreviations
• Assy - Assembly
• Ctrl - Control
• FRU 1 - Replacement part available in part hub
• FRU 2 - Replacement part available from the manufacturer (lead time involved)
• Int - Internal
• I/O - Input/Output
• KB - Keyboard
• LCD - Liquid Crystal Display
• MON - Monitor
• PAT. - Patient
• PC - Personal Computer (Back End Processor) Table 9-1   Contents in Chapter 9
SectionDescriptionPage Number
9-1
Overview 9-1
9-2 List of Abbreviations 9-1
9-3 Renewal Parts List For BT09 9-2
9-4 Renewal Parts List For R7.5.x 9-5
9-5 Renewal Parts List For BT07 9-8
9-6 Renewal Parts List For V65x 9-13
9-7 Renewal Parts List For BT06-2 or later 9-17
9-8 Renewal Parts List For BT06-2 CONSIP (SOI) 9-23
9-9 Renewal Parts List For BT04 and BT06 9-25
9-10 Renewal Parts List for BT03 or lower 9-57 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
9-2Section 9-3 - Renewal Parts List For BT09
Section 9-3
Renewal Parts List For BT09
This section describes the BT09 system FRU.
9-3-1 BT09, 19inch LCD: Equipment Models Covered in this Chapter (LOGIQ 7)
Table 9-2   Material List
Part NamePart NumberQuantityDescription
OPERATOR CONSOLE ASSY 5309921 1100V, NTSC
OPERATOR CONSOLE ASSY 5309922 11 120V, NTSC
OPERATOR CONSOLE ASSY 5309923 11 220V, PAL
OPERATOR CONSOLE ASSY 5309924 1220V, NTSC
LOGIQ7 R8.0.0 Application Software CD 5311031-3 111111
LOGIQ7 Ghost DVD for BECOMP4 5305206-3 111111
LOGIQ7 BT09 eDoc CD 5307396-200111111
LOGIQLEAN MIDDLE 23693841
MSDS FOR KAO ACOUSTIC GEL 2384010 1
GEL AQUASONIC GEL U0403BD11111
PARKER AQUASONIC100 2384142 11111
CD-R Media 700MB 5118386111111
DVD-R 4.7GB 8 x Speed media 5160800-2 111111
KEY LABEL2 2360321111111
LOGIQ 7 WEEE instruction 5143413111111
WARRANTY CARD P9889AH1
L7 Tempu-Bunsho for R6.5.X 51825471
AIUM Safety Pamphlet 51183491
AIUM Safety Pamphlet License 5123992 1
AC CORD 100V JPN 23714161
AC CORD 100V USA 237141711
AC CORD 200V EU 23714181 1
AC CORD 200V CHIN 2371415-2 1
P9538UA POWER CABLE TAG 2304574 1 1
SFDA LABEL L7  5149899 1
CAUTION TEL LABEL L7 2290996-3 11111
CAUTION TEL LABEL CHINA L7 2290996-4 1
P9524QE ETL.ETL-C LABEL 21353391 1 1 1
SONIC AuthorScript Data SDK Software 
License 5178485
111111
CrossBeam Option 2394377111111
SRI Option 5119471111111
Caution sheet for Power cables - US 5180867 1
CHINA RoHS EFUP 20 LABEL 5196197 1
LOGIQ 7 Ceritification of Quality 
Inspection for China 5229809
1
L7 L7P LS6 Addendum for Guidance and 
manufacturers declaration 5197395
111111
VERMONT HG LABEL 5241494333333
LOGIQ7 V750 STYLE_J LCD JPN (5304556)
LOGIQ7 V750 STYLE_J LCD USA (5304556-2)
LOGIQ7 V750 STYLE_J LCD EU (5304556-3)
LOGIQ7 V750 STYLE_J LCD KOREA (5304556-4)
LOGIQ7 V750 STYLE_J LCD ASIA120(5304556-5)
LOGIQ7 V750 STYLE_J LCD ASIA220(5304556-6) 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 9-3 - Renewal Parts List For BT09 9-3
9-3-2 BT09 Parts
The following parts are new for BT09 but other parts are common with BT06. For Common Parts not 
listed here, refer to Section 9-4 - Renewal Parts List For R7.5.x.
Figure 9-1 BT09 Parts
Table 9-3   BT09 Parts
ItemPart NamePart NumberDescriptionQtyFRU
1SVP-BECOMP4-L7 5308149 Device cards and UPS batteries not included 1 1
2DDR2 MEMORY4 1GB 5306528DDR-2 667 (1GBx1) 1 1
3SATA HDD 160GB5306526Serial ATA interface (both Signal and Power 
connectors are SATA) 11
4PCI Express Graphic board5306525Matrox P690  PCI-Express Slot11
-SVP BECOMP4 PARTS5316350Small parts collection for BEP411
5PCI-DGVIC2 Assembly5301220-2Video/Signal Interface11
6BulkHead for L7 and LS6
52572263 connectors in sheet metal 1 1
23
5
4111213
9
1416
10
17
8
6
151718
1 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
9-4Section 9-3 - Renewal Parts List For BT09
7Cable13 for BulkHead 5257231Internal 26pin flat cable -between PCI-DGVIC2/
Bulkhead 11
8Cable25 for BulkHead
5257233Internal 50pin flat cable -between PCI-DGVIC2/
Bulkhead 11
9SVP REAN4 PANEL5314714Metal plate with PCB board11
10SVP REAN4 USB CBL5314713USB Cables with metal plate11
-FRU Part LCD CABLE DUCT ASSY L7. 
No RGB Cable5309932
Main duct cable.  This par t same as previous duct 
cable FRU 5117797 but without Analog RGB  signal BNC cables
11
11DDBF128 ASSY CSL L7 5182379-2 1 1
12EBUS4T ASSY CSL L75182215 1 1
13EBUS4B ASSY CSL L75182757 1 1
14Mitsubishi CP30DW COLOR PRINTER5310492For market globally11
15Mitsubishi CP30D COLOR PRINTER for 
Japan5310491For use in Japan only11
16VCR MD-3000 JPN NTSC USB Control5212446For use in Japan only11
17VCR MD-3000 EURO PAL USB Control 5199397 For use in EU (or other areas with PAL system) 1 1
18VCR MD-3000 USA NTSC USB Control 5213259 For use in USA Only (or other areas with NTSC 
120V In/Out) 11
-R8.0.0 Application Software CD
5311031-3R800 common software for both upgraded BT09 
and pure BT09 11
-Ghost DVD for BEP45305206-3Base image (Ghost) for pure BT09 (BEP4 system) 
only11
-Ghost DVD for BEP35191839-3Base image (Ghost) for upgraded BT09 (BEP3 
system)11
Table 9-3   BT09 Parts
ItemPart NamePart NumberDescriptionQtyFRU