GE Logiq 7 Service Manual

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-45
8-2-10-7 Regional Setup (For the system with language other than English ONLY)  (cont’d)
4.) Select the  Advanced tab , then select Russian or Greek  in the Language for non-Unicode 
programs pull-down menu. Press  Apply. Answer  Yes to use files already loaded on the hard disk, 
then answer No  to not reboot the system yet, press  OK. Press Save  and Exit the Utility screen.
5.) Reboot the system. When your system restarts, the system appears in the selected language.
6.) To switch between the English and Russian (or Greek) keyboard, press  Alt+Shift  to change the 
keyboard to the Russian or Greek keyboard. 
7.) Apply the changes by pressing Apply . Press OK TWICE
.
Figure 8-107   Advanced tab
NOTICETo have the settings take effect, you MUST turn off the system and turn it back on. 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
8-46Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-10-7 Regional Setup (For the system with language other than English ONLY)  (cont’d)
For non-Russian / Greek Languages
1.) Press  Regional Options , select the Language tab , press Details, and comfirm default input 
Languarge to English  (United States) International.
NOTICEIf the system is used at U.S., press Regional Options > Language tab, press details, change default 
input Languarge to US .
Figure 8-108   Text Services and Input Languages 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-47
8-2-10-7 Regional Setup (For the system with language other than English ONLY)  (cont’d)
2.) Select the  Advanced tab , then select the language in the Language for non-Unicode programs pull-
down menu. Press Apply . Answer Yes to use files already loaded on the hard disk, then answer 
No  to not reboot the system yet, press OK . Press Save and Exit the Utility screen.
3.) Reboot the system. When your system restarts, the system appears in the selected language.
4.) To type foreign characters, press  Alt+Shift  to change the keyboard to the international keyboard, 
then press and hold down the  Alt GR+appropriate keyboard key .
Figure 8-109   Advanced tab 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
8-48Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-10-8 Printer Registration
1.) Verify that the power switches of the printer and scanner are turned ON.
2.) Select Utility > Connectivity > Button .
3.) Select the Printer1 button and select the user defined printer which has been recorded in 8-2-6-7  Printer Registration.
4.) Click on  >> to add Printflow View.
Figure 8-110   Printer Registration
1. Select the 
button the 
SONY UP-
D21(or 23)MD 
should be 
assigned.
2. Select the user defined printer.3. Click on >>. 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-49
8-2-10-8 Printer Registration (cont’d)
5.) Verify that the user defined printer is added in Printflow View.(Example shown: UP-D21(or 23)MD)
6.) For UP-D50 ONLY: When performing 4 divided frame print in the active image screen, select D50  for Active Image 
Printer.
7.) For UP-D21 or UP-D23: When upgrading to BT07, updated printer driver may be loaded and assigned. Before assigning 
Print Button to Printer, check DEVICE Tab for multiple UP-D21/23 Printer, and check for active 
printer.
8.) Right-click on  Save.
Figure 8-111   Save
1. Verify 
that the 
user 
defined 
printer is 
added.
2. SAVE.
For UP-D50 
ONLY: Select 
D50  for 4 
divided frame 
print. 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
8-50Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-10-9 Report Template (only for BT04 system)
Please setup the user template as it is.
Figure 8-112   Report Template 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-51
8-2-10-10 Regional Preset
9.) Touch Utility > System .
10.) Click  About tab.
11.) Click  Additional About Information .
12.) Check the region name of  Preset Region (Rquires reboot):
If it is None, skip this section.
13.) Click  Reload Factory Default  button.
14.) Click  OK on confirmation dialog box.
This changes Preset Region (Requires reboot) to None .
NOTICEFor the system other than NONE selected as Regional Preset, resetting MUST be required.
Figure 8-113   Preset Region
Figure 8-114   Reload Factory Default 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
8-52Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-10-10 Regional Preset  (cont’d)
15.) Click the button Reload **** Preset  corresponding you noted.
16.) Click  OK on confirmation dialog box. Figure 8-115   Reload buttons
Figure 8-116   OK 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-53
8-2-10-10 Regional Preset (cont’d)
17.) Check  Preset Region (Requires reboot) : is right region you selected.
8-2-10-11 Analog Peripheral After you update software version to R8.x.x, you may need to adjust peripheral settings. Figure 8-117   Preset Region 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
8-54Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-10-12 UP-D897 Parameter
1.) When system started, Go to  Utility > System >Peripherals, then hit Printers button in the Setup 
group.
2.) Click  SONY UP-D897  in the Printer List, then right click and select Properties .
3.) Select  General tab, then hit  Printing Preferences ... 
4.) Select  Layout tab, then ...
-Set  1920x1280  into Paper
-Check  off into Enlarge to Paper
-Set  Bilinear into Interpolation Method
-Set  Landscape  into Orientation
Figure 8-118   Printing Preferences
Bilinear