GE Logiq 7 Service Manual

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-2 - Hardware Compatibility Matrix 5-5
5-2-1-4 Front End
Figure 5-29   Front End- FRU Compatibility
R8.0.x R8.0.x R8.0.x R8.0.x
Latest Software
SW Upgraded BT09 (w  BT02/BT03 console)SW Upgraded BT09 from BT04/BT06/BT07
19 inch LCD Upgraded BT09 from 17 inch LCD
R8.0.X (BEP4)
comment
2357804-2 P9536CA DDBF SVC NNNN32ch
2399312 P9535CL DDBF64 ASSY   YYYN64ch
5182379 DDBF128 ASSY  CSL L7 NNNY128ch/use with EBUS4
2315492 P9538JD NEST BD JIG YYYY
2264606-2 P9535AU M DBRG ASSY NNNN
2264606-3 P9535AU M DBRG ASSY NNNNNoise reduction on BT04
2264606-4 P9535AU M DBRG ASSY YY+ N N
+Y if upgraded f rom BT04~BT06 but not BT06-2
2264606-5 P9535AU M DBRG ASSY YY+ N N +Y see c omment above
6T  Iss ue solved f rom -4 or lower vers ion
5145999 M DBRG2S ASSY CSL L7 NY*YYMDBRG 2S only on BT06-2 cons ole  (MDBRG2S
= MDBRG+SINANO2,  Insert to SINANO2 slot )
*Y if upgraded from BT06-2
5145999-2  M DBRG2S ASSY CSL L7  NY*YYImprovement for Memory Test false fail.  Previous
parts can still be used as FRU
2271702-2 P9535BA EBUS ASSY NNNN
2399317 P9535FA EBUS2 ASSY  YNNN Only for Upgraded BT04 from BT01/02/03
5111348 EBUS3T ASSY CSL LOGIQ7  NYY NUpper
5112465 EBUS3B ASSY CSL LOGIQ7 NYY NBottom
5182215 EBUS4T ASSY CSL L7 NNNY
5182757 EBUS4B ASSY CSL L7 NNNY
2273295 P9535BC M DCON ASSY NNNNNo need in BT04system
2264608-3 P9535AY M OTHER ASSY NNNN
5111345-2 M OTHER2 ASSY CSL LOGIQ7  NYYY
2264596-2 P9535AE PREA ASSY NNNN32ch
5119039 PREA2F ASSY CSL LOGIQ7 NYYY 64ch
2393853 PREA2H ASSY CSL LOGIQ7  YNNN Only for Upgraded BT04 from BT01/02/03
2264604-2 P9535AS PROM P ASSY NNNNNo need in BT04
/BT06system
2304617-5 P9538HW QCON ASSY YYYYNoise reduction on BT04
2264602-3 P9535AQ SINANO ASSY NNNN
2374744 P9535BQ SINANO2 ASSY   YYNN
2277244-4 P9535AG STCW ASSY YYYY
2268026 P9535BY TERM INATOR ASSY YYYY
2323353-4 P9535BJ TRAP2 ASSY NNNN32ch
5118342-3 BTRAPHV   ASSY NYNN 64ch.  Countermeasured against HVL current
control with full heigh HVPS.
5154321 BTRAPP5AHV Assy YNYY P
5A  64ch.
2323450-4 P9535GA TRAPCW ASSY NNNNTRAP + TXCW
5111346 LOGIQ7 BTXCW ASSY YYYYBTXCW  only (piggy board)
5244917 MOTHER2A ASSY  CSL LOGIQ7  NNNN
2305111-3 ? TX CABLE ASSY YYYY
FRU Part#
Description
FRU compatibility
BT09～ 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-6Section 5-2 - Hardware Compatibility Matrix
5-2-1-5 Backend
Figure 5-30   Backend - FRU Compatibility
R8.0.x R8.0.x R8.0.x R8.0.x
Latest Software
SW Upgraded BT09 (w  BT02/BT03 console)SW Upgraded BT09 from BT04/BT06/BT07
19 inch LCD Upgraded BT09 from 17 inch LCD R8.0.X (BEP4)
comment
5119906-2 BCOMPSW3 SVC CSL L7
(w/o Video Card) YY
NNNo Video card mounted. Need to reuse Video Card
when BECOM P3 replace to this new one.     
Pentium 4
(BEP3)  PCMother +CPU+PC2IPB+ATX
+Ethernet+H DD+Chas is  +Memory+ Mis c Par ts
5119906-3 BCOMPSW3 SVC CSL L7
(w/o Video Card / PC2IP)
YYY
NNo Video card/PC2IP/FALCON mounted. Need to
reuse Video Card / PC2IP/FALCON when BECOMP3
replace to this new one.     
Pentium 4 (BEP3)
PCMother +CPU+ATX +Ethernet+HDD+Chasis
+Memory+ Mis c P arts  +B as eImageCD
5119906-4 BCOMPSW3 SVC CSL L7
(w/o Video Card / PC2IP)
YYY
NNo Video card/PC2IP/FALCON mounted. Need to
reuse Video Card / PC2IP/FALCON when BECOMP3
replace to this new one.     
Pentium 4 (BEP3)
PCMother +CPU+ATX +Ethernet+HDD+Chasis
+Memory+ Mis c P arts  +B as eImageCD
5308149 SVP-BECOMP4-L7 N N NYNo Video card/PC2IP/FALCON mounted. Need to
reuse Video Card / PC2IP/FALCON when BECOMP4
replace to this new one.    Core2 DUO 
(BEP4)
PCMother +CPU+ATX +Ethernet+HDD+Chasis
+Memory+ Mis c P arts
5316350 SVP BECOMP4 PARTS N N NYMisc. parts for BEP4.  Parts include SATA
signal/power cable for HDD, DVI-VGA connector,
BEP4 internal USB cables and BEP4 Label
2304809-2 P9536RH BATTERY PACK YYYY
5118511 Extended M EM ORY3 LOGIQ7 YYYN Never be us ed on BE P2/ BEP 4
5306528 DDR2 M EM ORY 4 1GB  NNNY
5118510 HD LOGIQ7  YYYN80GB PATA
5306526 SATA HDD 160GB  NNNY160GB SATA type.  To be used with BEP4
5179643 HDD For Consip L7 Console NNNN160GB PATA type
FC200656 PC2IP II B YY* N N Only supported by BECOMPSW 3
*Y if BT04/BT06 / N if BT06-2/V65x/BT07~
FC200755 PC2IP 3 NNYYP
C2IP3 need R620 application
2362887 P9536TK AGP BOARD ASSY   YY+ N N G550 Video Card AGP Type for CRT console
+Y if CRT console
5111298 DUAL DVI AGP NY$YNSONO64 Video Card AGP Type : Only for LCD System
Y$ if LCD console
5121039 PCI VGA NY$YN G450 Video Card PCI Type : Only for LCD System
5306525 PCI Express Graphic board  NNNYMatrox P690 Video Card for PCI-E slot
5142743 BECOM P3 Rear Fan Assy YYYYCommon for BEP3/BEP4
TBD SCSI Card YNNN Mounted only on Upgraded B T 04
/BT06 system in
BECOMP3  for MOD Connection
5147460 F ALCON Capture Board
NY%YYVideoCapture Board directly from REAN3 on BT06-2
console
Y% if upgraded from BT06-2/V65x~ (with REAN3)
5169391 ? YC Cable (S-Video) NY%YYCable that connects VideoCapture Board between REAN3
on BT06-2 console
Y% if upgraded from BT06-2/V65x~ (with REAN3)
2384944 P9536CE DGPCIO/VIC_SVC NNNNOnly suppoted by BEP2. Even if BEP2 mounted, if PCVIC
is mounted, order PC2IO/VIC for BT01 console.
5133526 DGPCIO VIC 2-A ASSY  YYYN Updated f or  LC D
2389075 ? PCI CABLE YYYY
5301220-2 PCI-DGVIC2 Assembly NNNY
5257226 BulkHead for L7 and LS6  NNNY
5257231 Cable13 f or B ulkHead  NNNY
5257233 Cable25 f or B ulkHead  NNNY
FRU Part#
Description
FRU compatibility
BT09～ 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-2 - Hardware Compatibility Matrix 5-7
5-2-1-6 Power Units
Figure 5-31   Power Units- FRU Compatibility
R8.0.x R8.0.x
R8.0.x
R8.0.x
Latest Software
SW Upgraded BT09 (w  BT02/BT03 console)SW Upgraded BT09 from BT04/BT06/BT07
19 inch LCD Upgraded BT09 from 17 inch LCD R8.0.X (BEP4)
comment
2304538-4 P9534WP AC POWER BOX 200V Y
N N N Include AC BOX, AC Code, and extention cable
2384371 P9534XL AC POWER BOX ASSY JPN YNNN Include AC BOX, AC Code, and extention cable
(Only for Japan)
2384370 P9534XP AC POWER BOX ASSY 100V YNNN Include AC BOX, AC Code, and extention cable
(not for Japan)
2304624 P9538JC CONSOLE FAN SSY NNNN
5117493 CONSOLE FAN ASSY 2 CSL L7 N
YYY
5122614 CONSOLE FAN ASSY-A UPG L7  Y
N N N Only for Upgraded BT04 from BT01/02/03
2372387 P9534XH L7HV-SVC YYYY
2334197 P9534WU LV-2 SERVICE UNIT Y
N N N Compatible with 2283531 (LV)
2292209 P9534WF SSR PANEL Y
NNN
2315585 P9534WR FUSE FOR SSR PANEL Y
NNN
2283530 P9534WB M AIN TRANS Y
NNN
2373331-2 M AIN TRANS2 ASSY CSL L7 YYYY
5117721 LV-04 UNIT M AIN PS L7  N
YYY
5118824-2 LV-04 UNIT with Cables   N
YYY Nois e Improvement
5117723 NF INLET ASSY M AIN PS L7  N
YYY
5117724 AC IN OUT 100V M AIN PS L7 N
YYY
5117725 AC IN OUT 200V M AIN PS L7 N
YYY
5118052 AC IN200 OUT100 ASSY M AIN PS L7  N
YYY O nly f or Korea Sys tem
5117726 SSR PCB ASSY M AIN PS L7 N
YYY
5117727 FUSE HOLDER M AIN PS L7 N
YYY
5117728-3 CONN ASSY M AIN PS L7  N
YYY
5119119 SSR-HLV CABLE N
YYY
5119120 SSR-AC PANEL CABLE N
YYY
5119121 VOLTAGE SEL CABLE N
YYY
2301858-3  ? PW SW ASSY N
YYY
5117493 CONSOLE FAN ASSY2 N
YYY
5117491 FAN CABLE BRAKET ASSY N
YYY
FRU Part#
Description
FRU compatibility
BT09～ 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-8Section 5-2 - Hardware Compatibility Matrix
5-2-2 Hardware Identification Tip
5-2-2-1 LCD Monitor Differences
The flowchart below describes how to differentiate LCD monitor type.
Figure 5-32   LCD monitor- How to Differentiate
GPN Identification Mark
(Bottom of LCD monitor) 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-2 - Hardware Compatibility Matrix 5-9
5-2-2-1 LCD Monitor Differences (cont’d)
LCD Variation Tips:
• Bezel Shape - Curvy for 17 inch
- Straight for 19 inch
• GE Logo - Silver for 17 inch
- Silver on black background for 19 inch
Figure 5-33   LCD Variation Tips 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-10Section 5-2 - Hardware Compatibility Matrix
5-2-2-2 BT09_SV_BEP4 Configuration Variationos
Figure 5-34   BT09 Configuration Variations
N/A R8.x.x R8.x.x SoftwareNote
Console
Config
N/A BT04/BT06/ 
BT07 base BT04/BT06/B
T07/BT09 
base
MD-3000 USB Upgraded to BT09
(BEP3) BT09 Original
(BEP4)
・Label “RS232C Not Available” on back
・
Utility Menu shows Ghost Part Number
・ NO Rear Panel markings
・
Utility Menu shows Ghost Part Number
・ REAR Panel have GPN printed : 
5304518 : REAR CONN4 ASSY L7N/A R8.x.x R8.x.x Software Note
Console
Config
N/A BT04/BT06/ 
BT07 base BT04/BT06/B
T07/BT09 
base
MD-3000 USB Upgraded to BT09
(BEP3) BT09 Original
(BEP4)
・Label “RS232C Not Available” on back
・
Utility Menu shows Ghost Part Number
・ NO Rear Panel markings
・
Utility Menu shows Ghost Part Number
・ REAR Panel have GPN printed : 
5304518 : REAR CONN4 ASSY L7
RS232C Not Available
BEP4
MD-3000 USB 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-3 - Peripheral Compatibility 5-11
Section 5-3
Peripheral Compatibility
NOTE: For SONY D21MD (or D23MD) color printer ONLY:
The D21MD (or D23MD) printer contains the L-sized ribbon cassette and paper as a standard. 
However, the S-sized paper is recommended for LOGIQ 7 system. If the S-sized paper is used 
with the L-sized ribbon cassette, “Incorrect paper size setting” error occurs with no print.
So, when using the S-sized paper, change the ribbon cassette to the S-sized.
Figure 5-35   Peripheral Compatibility 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-12Section 5-4 - Block Diagrams and Theory
Section 5-4
Block Diagrams and Theory
5-4-1 Block Diagram (R7.5.x or later, 19 inch LCD model)
Figure 5-36    System Block Diagram (R7.5.x or later)
1 SPCF 
 $PO1 SPCF 
 $PO
1$0/
48
48
5
*OU FSGBDF&64$

*OUF SGBD F
14&-
2$0/
 L NA TGC
13&
1 VT MFS

4*$64ch
EU SC  I/F &  Pul se  gener ator
%SJWFS
1 VT MFS

4*$1 VT MFS

4*$)74&-#5311)7#531$8%
ESJWFS
#59$8

%SJWF S%SJWF S%SJWF S%SJWF S%SJWFS
128ch&64$

*OUF SGBD F&64$

*OUF SGBD F45$8
16bit A/ D
PSN
%FU LNA TGC
 L NA TGC LNA TGC
 LNA TGC
 L NA TGC
&64$

*OUFS GBDF
Am p
8chAD CAA FAm p
AD CAA F
OQX 2
Am p
8chAD CAA FAm p
AD CAA F
OQX 2
Test  
Si gnal
8bl ockClo ck 
I/F
B¡ d 
SU M   I/ F
Am p
8chAD CAA FAm p
AD CAA F
OQX 2
&64$

*OUFS GBDF
%%#
TG C Control  Test  Siganl  Clock 
Distribu ter
M aster 
Clock  
(160MHz)
TI-DSP PC I I/F
CHACOM I / F
TIDS P  I/ F
ADI  DSP I/ F
EUSC I/F
DDR 
SDRAMCHACOMCHACO M
1( 41 *
*
-JOL
1P SU
-JOL
1PSU 

&.*
MID BUS(PCI)D opple
r A udio
PC I-P CI Bridge
Intel 21152
PC I  Cabl e to B EP
SDRAMSH 4-PC I  Br idge
SH BUSRO MSH4
EUSC I/FSafe
ty6T P rob eHV C TL4D   BoxPS 
Observat ionSDRAMSDRA M
SDRAM
SDRA M
&64$
4PVOE .JYFS
44 344 3
$
0VUMF
U
# 8
1SJO
UFS
59
14
48

DPNU SPM
.JD
1$ *1 
%(7*$ %(1$*0
34$4PVOE
 #SBT UFS
**$

7

 71 BUJFOU
 *0
7(
7(
614
#5
)%%
%7%
7
4U BOECZ
%7*
%
%SJWFS
%
 $PO
PPU
 48
5PVDI

1BOFM
-$%
$16

*
64#
)6#
.BJO
48
*%&
&UIFSO F U
)%%

$PNQ
# 8
 PVU
$PNQ
$PMPS
 PVU 4 7*%&0
 PVU 7(
PVU
01
1/&- 3&3
1/&-
-$%

.0/*503
4 7*% &0
 JO
BMD PO
)7-7
4IVU UFS
$POUSPM
# 8
$BNFSB
$PMPS
$BNFS B
VEJP
 0VU
.POJUPS%
#PY
.%#3(4
.#&$0.1-$%
%$
.BJO .FNPSZ
1$ *
(SBIQJD
64#
(1

(SBIQJD
%7*
 $POOFDU PS
.POJUPS 4)7
5
5FNQ
VEJP
 *O
&UIF SOFU
7$37$34&37*$&*O4JUF
1$*
(1
30/5 $0//
1$
4XJUDI
#3&,&3
 7 7
*/364)

-*.*5
$% $*/-&5
 1$#
#3&,&3
 7 7/ /
443
1$#
64&

$
*OQV
U
ADI 
DS P
AD I  
DSP
1 30.1 
 FRVJWBMFOU 
GVODU JPOSDRAM
1 SPCF 
 $PO1 SPCF 
 $PO
1$0/48
64#
%&7*$&

#:
# 8
135
&YU
 .JD
64#
3&4 &5
3&4&5
$
7
$
7
$ 7
$ 7
$ 7
)%.*
$POOFD UPS
183
4611-:
%$7
1P XFSFE 
64#
 $POOFDUP S
-3 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-4 - Block Diagrams and Theory 5-13
5-4-2 General Information
• LOGIQ™ 7 is a phased and linear array ultrasound imaging scanner. It has provisions for analog 
input sources like ECG and phono. A dedicated Doppler probe may also be connected and used. 
• The system can be used for:  - 2D Black and White imaging 
-2D Color Flow 
- M-Mode Black and White imaging 
- Color M-Mode 
- Doppler
- a number of combinations of the above
• LOGIQ™ 7 is a digital beam forming system that can handle up to 192 element linear probes  through multiplexing.
• Signal flow from the Probe Connector Panel to the Front End, to the Mid Processors and Back End  Processor and finally to the monitor and peripherals. 
• System configuration is stored on a hard disk and all necessary software is loaded from the hard  disk on power up. 
						

							GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-14Section 5-4 - Block Diagrams and Theory
5-4-3 CPU/Back End Processor (For BEP4 for BT09 or later)
5-4-3-1 BEP4 Signal Connections
Figure 5-37   BEP4 Signal Cable Connection
CPU
PW2
Keyboard, Mouse
( Not Used )
VGA ( Not Used )
USB Ports (2 ports)
MIC,  Line in/out
OPMA Conn ( Not Used )
PCI-Express slot - Graphics Card
PCI Slot  - PCIDGVIC2
PCI-Express slot (Not Used )
PCI Slot  - FALCON
PCI Slot  - PC2IP3
PCI Slot   ( Not Used )
FDD / IDE
( Not Used )
USB 4
USB5         USB6          USB3
CPU Fan
Fan2
( Not Used )
Fan 6
Fan 4
( Not Used )
SATA
LAN (one of three is used) PW1
Memory DIMM1
DIMM2
DIMM3
DIMM4
Not Used
Not Used
SATA  HDDBulk Head
Extended USB Ports (2 ports)
Pin Header
( Power SW,Reset SW,
HDD LED,
Power LED )
Connector Panel
ECG unit
[ Signal Cable connection in BECOMP4 for L7 ]
Extended USB Ports (2 ports)
Extended USB Ports (4 ports)
USB Ports (2 ports)
Fan 5
Fan 3
( Not Used )