compaq contura 400 family User Manual
Have a look at the manual compaq contura 400 family User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 65 Compaq manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 187
Replacing the Display Enclosure Springs and Latches
To replace the display springs and latches, follow these steps:
1. Hook the display latch spring on to the display latch [1] and place the
display latch spring over the post in the display enclosure [2]
(Figure 3-133).](http://img.usermanuals.tech/thumb/1258/38919/w64_compaq-contura-400-family-186.png "Page 187
Replacing the Display Enclosure Springs and Latches
To replace the display springs and latches, follow these steps:
1. Hook the display latch spring on to the display latch [1] and place the
display latch spring over the post in the display enclosure [2]
(Figure 3-133).")
the ground wire which is attached to the inverter board. Removing the Display Inverter Board for the CTFT (10.4 inch) Display >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WARNING >>>>>
To remove the inverter board for the CTFT (10.4 inch) Display, follow these steps: 1. Disconnect all power from the computer and remove the AC Adapter and battery pack (Section 3.2). 2. Open the computer. 3. Remove the display bezel. Refer to Removing and Replacing the Display Bezel in this section. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>
Replacing the Display Inverter Board To replace the inverter board, follow these steps: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WARNING >>>>>>
135-degrees (Figure 3-142). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>
12. Carefully remove the CSTN (10.4 inch) panel, display cable, and shield from the display enclosure (Figure 3-144).