Comdial Digital Telephone System Instructions Manual

							System ProgrammingIMl66-107Video Display Terminal Programming Procedure 
- continued
Menu Descriptions 
- continued
0 Selection 2: Line group assignment
l Selection 3: Line dialing mode (pulse or tone to
match the connected line)
0 Selection 4: Line privacy release (releases privacy
on a line)
l Selection 5: Line toll restriction table assignment
0 Selection 6: Line abandoned hold release time
0 Selection 7: Set up a line (Using a model line)
(provides a means of programming a group of lines
to match the programming of a model line)
0 Selection 6: Assign name to line
0 Selection 9: Assign line to department
0 Selection 10: Exclusive hold
l Selection If: Voice mail line ID (Specifies
identification number of a particular line to the voice
mail accessory for personalized call coverage)
l Selection 12: DISD assignment (Assigns DISD to
lines and specifies calling characteristics of them)
l Selection 13: Caller ID assignment
lAssign Caller ID To Lines
lAssign Caller ID To Stations
lAssign Area/Office odes For Dial Feature
l Audible First Ring
l Caller ID Distribution
Station COS Menu Selection
Station C.O.S. Programming
1. Set Up a Station (Using a Model Station)
2. Assign Name to Station
3. Assign Station to Department
4. Assign Station to SOHVA Group
5. Line/ Intercom Features
6. Ringing Assignment
7. Button Mapping
8. Toll Restriction Administration
9. Automatic Busy/ RNA Call Forwarding
10. Miscellaneous Feature Programming
11. Speakerpone Coefficients
12. Return To Previous Menu
Enter Selection:In each station COS menu selection, after choosing
the feature, enter a station port number which is to be
assigned to it and enter line port numbers where
prompted. Multiple station number entries are allowed
for some features as prompted.
l Selection 1: Set up a station (Using a model
station) (program a group of stations to match the
programming of a model station)
l Selection 2: Assign name to station
l Selection 3: Assign station to department
e Selection 4: Assign station to SOHVA groups
0 Selection 5: Line/Intercom features
0Prime Line (assign prime line, prime group,
prime intercom, or clear all)
lRinging tine Preference (enable or disable)
lLine Access Deny (enable or disable station
access to a line)
lLine Originate Deny (enable or disable station
ability to originate a call on a line)
lIdle Line Preference (enable or disable access
to an idle line when station is taken off hook)
lBlock Voice Announce Intercom Call
lAudible Monitoring (audible ringing sounded for
stations with BLF appearance at programmed
station)
l Selection 6: Ringing assignment
lPersonal Ringing Tones (Choose one of six
different tones.)
lDirect/Delayed Ringing (of each line assigned to
programmed station)
oNight Ringing (enable or disable night transfer,
of ringing, to programmed station for
programmed lines)
l Distinctive Ringing For ATI-D
l Selection 7: Button mapping (assign functions to
buttons)
Special Note: When button mapping a Dig/Tech
telephone, you must type an “A 
” or “B” before
typing its button numbers when identifying them
for function assignment; however, when button
mapping an Impact or an Americom telephone 
do
not type an ‘L” before its button numbers when
identifyjng them. To do so, causes the system to
interpret the typed 
en@ as a line number choice
instead of a button number choice.
4-84 
						

							lM166-107System ProgrammingVideo Display Terminal Programming Procedure 
- continued
Menu Descriptions 
- continued
lFunctions that can be assigned are identified per
the following list:
To display list, enter ?.
Return to key mapping with 
Control Z.
BLKBlank
Lnn
Line (1 
- 24)
SnnStation (10 
- 57)
DND
Do Not DisturbPRI
Privacy
IC22nd Intercom
SAVSave
ACCAccount Code Button
ZPn
Zone Page (l-3)
ACAll Call
ACBAuto Callback
CF
Call Forward
CPnCall Park (l-9)
TGn
Line Group (l-4)
VABVoice Announce Block
TGQLine Group QueueEX
Exit Button Mapping
System displays list of current button mapping at
station. Some buttons listed may not be present on the
station being programmed.
Enter new function for button and press 
ENTER, or
press ENTER to accept current function.
0 Selection 8: Toll restriction administration (assigns
toll tables to station)
l Toll Restriction Table Assignment (assign
pre-programmed toll restriction tables to be
applied to all regular calls)
lNight Mode Toll Restriction Table Assignment
(assign pre-programmed table to be applied to
calls on night transferred line)
l System Speed Dial Toll Restriction (assign
pre-programmed toll restriction tables applied to
system speed dial numbers)
l Selection 9: Automatic busy/RNA forwarding
(Links programmed station to another one to form
hunt group. Also, selects number of rings to occur
at programmed station before ring-no answer
(RNA) call is forwarded to linked station.
l Selection 10: Miscellaneous feature programming
(programs a variety of features for the station)
l
.
.
.
.
.
.
.
.
.
.
0
0
.
.
.
.
l
0
.
.
Automatic Privacy Release (Enable or disable
automatic privacy release or a per line basis.)
Line Auto Hold (active line automatically held
when new line is selected)
Intercom Auto Hold (intercom automatically held
when new line is selected)
Thru 
Dialing/AT1 (arrange port to allow DTMF
tones to pass through to connected equipment)
Executive Override
Do Not Disturb Override
Service Observing
All-Call and Zone Paging
’
Message Wait Originate
Head Set Mode
Group Call Pickup
Subdued Off Hook Voice Announce
Data Security Ports
LCD Call Costs (display of cost for current call)
Americom Dynamic Line Buttons
System alarm recipient
Unobservable station
Voice mail transfer on busy for station
Voice mail port
Second console
Americom interactive buttons
Toll Restriction Table Administration
1. Build / Modify an Allow Table
2. Build 
/ Modify a Deny Table
3. Clear a Table 
/ Entry
4. Return To Previous Menu
Enter Selection
Toll Restriction Table Administration
Use the toll restriction table administration menu to
build toll restriction tables for line and station
assignment. Refer to the previous discussion titled
Toll Restriction Table Configuration for a discussion
concerning toll restriction table construction and
assignment.
4-85 
						

							IMl66-107System Programming
Class; Of Service Configuration Records
The following pages provide you with a permanent record of the programming parameters. You
can copy these pages to provide a separate record to leave with the common equipment if you
wish.
4-87 
						

							System ProgramminglMl66-107
System Configuration Records
System Configuration - Miscellaneous Features
utomatic Station RelocationEnable ) Disable
Default = disable
Data Baud Rate
10 BaudI
17-d&1/2 stop bits
.we Hold 1  Enable1 Disable
( Default = enabled 1
Extended DTMF Tones
For Automatic Dialinq
60 
msec
80 
msec
100 
msec
120 
msec
j60 msec
1240 msec
S20 msec
400 
msec
480 
msec
560 
msec
720 
msec
880 
msec
1040 
msec
Default = 80 msec.-I
Do Not Disturb Inhibit System-Wide 1 Enable( Disable
Do Not Disturb Override Stations (1 O-57)DND Button (Al 
- A14, Bl - 88Default = inhibit enabled,
no override assigned,
no DND button
System Alarm Reporting/ Enable( Disable1
 Default = disable
Station MonitoringVisual Ring Indication 
( Enable 1 Drsable
Audible 
Ring Indication Stations (10 - 57)
Default = visual indication disabled,
’no audible indication assigned
andem Attendant/ Enable 1 Disable
Default = d/sable
Tone or Voice SignaIling Voice / Tone
(Default = tone 
						

							IMl66-107System ProgrammingSystem Configuration Miscellaneous 
Feat&es - continued
SOHVAToneBurstsl 11213141516
Default = 6
(TAB1 17~31) 
						

							lM166-107
System Programming
System Configuration Records - continuedSystem Configuration 
- Miscellaneous Features - continued
116I1
 Default: 1= BACK AT, 2 i CALL
25 I150 I175 II
4-89 
						

							IM166-107
System ProgrammingSystem Configuration Records 
- continued
System Configuration 
- Feature Inhibiting 
						

							System ProgramminglMl66-107
no groups asgn’d., no names asgn’d,, all ports co, same line/port, all tone dialing, no VM ID.
FeatureOtt (Write:
Model Line Port
I
Block Programming
Start Line PortEnd Line PortI
4-92 
						

							IMl66-107System Programming
Station Confiauration Records
(Use this sheet as an individual station record or as a record for a block of like-programmed stations. You can
make copies of this blank sheet as needed to meet the system capacity)4-93