Brother Printers Mfc 7750 Laser 600x600dpi Super G3 Fax Owners Manual

							177USING THE MFC AS A PRINTER
Print Priority Key
When you press Print Priority, the MFC enters printer mode, and will not print
faxes on paper.  Instead, faxes are stored in memory until you press
Print Priority again.
Test/Reset Key
You can use this key to print a test sample page.  If data remains in the
printer memory, press 
On/Off Line, then press Test/Reset (the printer cannot
print a test sample page if it is online). The MFC prints a test sample page.
You can also use this key to clear data from the memory and reset printer
default settings. Press 
Test/Reset and Shift at the same time; all data is cleared
from the printer memory.
Printing the Internal Font List
You can print a list of the MFCÕs internal (or resident) fonts to see how each
font looks before you select it.
1Press Function, 2, 1, 1.
2Press Start. The MFC prints the list.
3Press Stop to exit.
Printing the Print Configuration List
You can print a list of current settings for the printer.
1Press Function, 2, 1, 2.
2Press Start. The MFC prints the settings.
3Press Stop to exit. 
						

							178CHAPTER  SIXTEEN
Restoring Factory Default Settings
You can return the MFC to original factory settings.  Permanent fonts are
restored, but macros are cleared.  You can change user settings using the Remote
Printer Console program (see page 171).
1Press Function, 2, 2, 1. The screen displays
1.RESET 2.EXIT
2Press 1 to restore the factory settingsÑORÑPress 2 to exit without
making a change.
3Press Stop to exit.
Printing PC Data in Hexadecimal
You can print data as hexadecimal values, so that you can check data errors
and problems. If you select HEX DUMP MODE, all PC data is printed
hexadecimal. To turn hexidecimal mode off press 
On/Off Line then Shift and
Test/Reset at the same time.
1Press Function, 2, 2, 2.  The screen displays
1.SET 2.EXIT
2  Press 1 to set PC to hexidecimal modeÑORÑPress 2 to exit.
3Press Stop to exit. 
						

							179
17
CHAPTER SEVENTEEN
Optional
Accessories
Memory Board
The memory board is installed on the main controller board inside the MFC.
When you add the optional memory board, it increases the performance
modes for both fax and printer operations.
(For MFC 4350, MFC 4650 and MFC 6650MC Only) 
						

							180CHAPTER  SEVENTEEN
Optional Memory for the Printer & Fax Operations
Your MFC 4350, MFC 4650 or MFC 6650MC has 2MB of memory and can
recognize 1MB (ME1000) or 2MB (ME2000) of Optional Memory. Be
careful to purchase the appropriate memory board for your needs.
For the Printer
Additional memory is useful and may be necessary if you want to download
many different fonts) or want to print a very complex document.
For the Fax
Additional memory is available and will expand the memory used for
sending and receiving faxes.
Model Name Optional Memory  Total
MFC 43502.3 MB
MFC 4650 1 MB  (up to 230 pages)
MFC 6650MCÑORÑ
ÑORÑ(For MFC 6650MC, 30 minutes)
1.3 MB3.3 MB
(up to  130 pages) 2 MB(up to 330 pages)
ÑORÑ ÑORÑ
(For MFC 6650MC, 20 minutes) (For MFC 6650MC, 45 minutes)
Using Brother #1 Chart with MMR coding and Standard Resolution. 
						

							181OPTIONAL ACCESSORIES
Installing the Optional Memory Board
1Unplug the power cord from the AC outlet and disconnect the interface
cable.
WARNING
Unplug the power cord before installing (or removing) the memory board.
2Press down on the top of the rear cover to release the hook, and pull the
rear cover out.
WARNING
Do not touch the surface of the main controller board. 
						

							182CHAPTER  SEVENTEEN
3To install the memory board onto the main controller board, use the
attached spacer and plug it into the connector on the left of the main
controller board.
Memory 
Board
SpacerConnector
Main Controller 
Board
Connector
WARNING
nHold the edge of the memory board. Do not touch the surface of the
board.
nMake sure the memory board is securely seated in the main controller
board.
4Reinstall the rear cover.
5Reconnect the interface cable.
6Plug the power cord into the AC outlet. 
						

							183
Standard Telephone  and
FCC Notices (For 120V Models Only)
These notices are in effect on models sold and used
in the United States only.
This equipment is hearing aid compatible.
When programming emergency numbers and/or making test calls to
emergency numbers:
nRemain on the line and briefly explain to the dispatcher the reason for
the call before hanging up.
nPerform these activities in the off-peak hours, such as early morning or
late evening.
This equipment complies with Part 68 of FCC Rules. On the rear panel of
this equipment is a label that contains, among other information, the FCC
Registration Number and Ringer Equivalence Number (REN) for this
equipment. You must, upon request, provide this information to your
telephone company.
You may safely connect this equipment to the telephone line by means of a
standard modular jack, USOC RJ11C.
An FCC compliant telephone cord with a modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone line
or premiseÕs wiring using a compatible modular jack that is Part 68
compliant. See the Installation section of this manual for details.
18
CHAPTER EIGHTEEN
Important
Information 
						

							184CHAPTER EIGHTEEN
The REN is useful to determine the quantity of devices you may connect to
your telephone line and still have those devices ring when your telephone
number is called. In most, but not all areas, the sum of the RENs of all
devices connected to one line should not exceed five (5). To be certain of
the number of devices you may connect to your line, as determined by the
REN, you should contact your local telephone company to determine the
maximum REN for your calling area. If your MFC 4350, MFC 4650,
MFC 6650MC or MFC 7750 damages the telephone line, the telephone
company may discontinue your service temporarily. If possible, they will
notify you in advance. If advanced notice is not practical, you will be
notified as soon as possible. You will be informed of your right to file a
complaint with the FCC.
Your telephone company may make changes to its facilities, equipment,
operations or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.
If you experience trouble with your multi-function center, please contact a
Brother Authorized Service Center for information on service or repair. The
telephone company may ask that you disconnect this equipment from the
line until the problem has been corrected or until you are sure that the
equipment is not malfunctioning.
If you are not able to solve a problem with your multi-function center,
contact Brother Customer Service at
USA:1-800-284-4329 (voice)
1-908-575-8790 (fax)
From within Canada:1-800-853-6660 (voice)
1-514-685-4898 (fax)
From within Montreal:1-514-685-6464 (voice)
The serial number is on the back of the unit. Please circle your model
number below and retain this OwnerÕs Manual with your sales receipt to
serve as a permanent record of your purchase, in the event of a theft, fire, or
warranty service.
MODEL NO: MFC 4350,  MFC 4650,  MFC 6650MC, MFC 7750
(circle one)
SERIAL NUMBER _____________________________
NAME OF DEALER ____________________________
DATE OF PURCHASE __________________________ 
						

							185IMPORTANT INFORMATION
WARNING
For protection against the risk of electrical shock, always disconnect all
cables from the wall outlet before servicing, modifying or installing the
equipment.
This equipment may not be used on coin service lines provided by the
telephone company or connected to party lines.
Federal Communications Commission(FCC)
Declaration of Conformity
(For USA Only)
Responsible Party : Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911  USA
TEL : (908) 704-1700
declares, that the products
Product Name : MFC 4350, MFC 4650, MFC 6650MC, MFC 7750
comply with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference
that may cause undesired operation.
Important
A shielded interface cable which is included with your MFC should be used
in order to ensure compliance with the limits for a Class B digital device.
Changes or modifications not expressly approved by Brother Industries,
Ltd. could void the userÕs authority to operate the equipment.
Laser Safety (For 110-120V Models Only)
This equipment is certified as a Class I laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation Performance
Standard according to the Radiation Control for Health and Safety Act of
1968.  This means that the equipment does not produce hazardous laser
radiation.
Since radiation emitted inside the equipment is completely confined within
protective housings and external covers, the laser beam cannot escape from
the MFC during any phase of user operation. 
						

							186CHAPTER EIGHTEEN
FDA Regulations
U.S. Food and Drug Administration (FDA) has implemented regulations for
laser products manufactured on and after August 2, 1976.  Compliance is
mandatory for products marketed in the United States.  One of the following
labels on the back of the printer indicates compliance with the FDA
regulations and must be attached to laser products marketed in the
United States.
Manufactured
BROTHER INDUSTRIES, LTD.
15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21 CFR
Subchapter J.
CAUTION
Use of controls, adjustments or performance of procedures other than those
specified in this manual may result in hazardous invisible radiation
exposure.
CAUTION
Changes or modifications not expressly approved by Brother Industries,
Ltd. may void the users authority to operate the equipment.
Attention
The MFC 6650MC you purchased contains a rechargeable internal battery
(Ni-MH).  At the end of its useful life, under various state and local laws, it
may be illegal to dispose of this battery into the municipal waste stream.
Check with your local solid waste officials for details of recycling options
in your area and proper disposal.  If you have a problem, contact Brother
Customer Service, see page i.