ATT System 25 Installation And Maintenance Manual

							APPENDIX E: Administration Codes and Data
This page is intentionally blank
E-2-b 
						

							APPENDIX E: Administration Codes and Data
Table E-B. PORT/PD. Administration, Voice Terminals (Menu=1/2) (Contd)
ACTIONDESCRIPTlONDATA
17Send ringing to bridged appearances
[1=Y/0=N]
when principal doesn’t answer?
18Send ringing to bridged appearances[1=Y/0=N]
when principal is busy?
19Is this a display station?‡[1=Y/0=N]
20Enable automatic incoming call ID‡[1=Y/0=N]
21Type of account code entry
[0=optional,  1=forced
(for all outside calls),
2=forced (for calls
beginning with “0” or
“1”)]
22Allow this station to use remote call[1=Y/0=N]
forwarding?
23Allow tool-restricted stations to make IXC[1=Y/0=N]
codes+1NPA calls.
24Allow tool-restricted stations to make IXC[1=Y/0=N]
codes+O11 calls.
25Allow tool-restricted stations to make IXC[1=Y/0=N]
codes+NXX calls.
40Assign the number of callback retries for
[0-15; 2]
internal facilities
41Number of rings per callback try for
[2-15; 3]
internal facilities
42Assign the number of rings per callback[0-15; 2]
try for outgoing facilities
43Assign the number of rings per callback[2.15; 3]
try for outgoing facilities
44Assign automatic queuing for internal[1=Y/0=N]
facilities
45Assign automatic queuing for outgoing[1=Y/0=N]
facilities
* Not administrable for SLAC or DTAC.
‡ Not administrable for SLAC.
November 1995E-3 
						

							APPENDIX E: Administration Codes and Data
Table E-B. PORT/PD. Administration, Voice Terminals (Menu=1/2) (Contd)
ACTIONDESCRIPTION
DATA
46
51
52
53
60
90
100
101Enable call waiting*
[1=Y/0=N]
Display the number of any trunks
assigned to this station for night service
Assign a trunk to this station for night[4-digit trunk number]
service
Delete a trunk from this station’s night[4-digit trunk number]
service list
For DTAC or SLAC: Display attendant[1=1st Att./2=2nd Att.]
position number (Read-only)
Assign/remove PDE Display ID[“1 1 characters or less,”
or** to remove]
Button to be assigned
[button #]
SYSTEM ACCESS - ORIGINATE ONLY[1]
If type 310 or311:
NOT ADMINISTRABLE
100Button to be assigned
[button #]
101POOLED FACILITY[2]
102Facility Access Code of this pooled
[FAC]
facility
l Not administrable for SLAC or DTAC.
E-4November 1995 
						

							APPENDIX E: Administration Codes and Data
Table E-B.PORT/PDC Administration,Voice Terminals (Menu=1/2)
(Contd)
ACTIONDESCRIPTION
DATA
100Button to be assigned[button #]
101
PERSONAL LINE[3]
If type 310 or 311:
NOT ADMINISTRABLE
1024-digit Listed Directory Number” for[trunk #]
this trunk
103Is this the  Principal  station?[1=Y/0=N]
104Enable ring for calls on this button?[1= Y/0=N]
100Button to be assigned[button #]
101
EXCLUSION[4]
100Button to be assigned[button #]
101
STATION-TO-STATIONMESSAGE[5]
WAITING
102
PDC of the station that’s paired with[PDC]
this station’s MSG WAIT button
103
Button number of the MSG WAIT[button #]
button on the paired station
100Button to be assigned
[button #]
101
COVERAGE MESSAGE WAITING[6]
Iftype310 or311:NOT
ADMINISTRABLE
100
101Button to be assigned
MANUAL SIGNALING[button #]
102
PDC of signaled station[PDC]
E-5 
						

							APPENDIX E:
Table E-B.
Administration Codes and Data
PORT/PDC Administration,Voice Terminals (Menu=1/2)
(Contd)
ACTIONDESCRIPTION
DATA
100Button to be assigned[button #]
101AUTOMATIC INTERCOM[8]
102PDC of paired station[PDC]
103Button number of the AUTO ICOM[button #]
button on the paired station
100Button to be assigned[button #]
101TRANSFER TO DATA
[9]
102Associated DDC[DDC]
100Button to be assigned[button #]
101
CALL COVERAGE - GROUP[10]
Iftype310 or311:NOT
ADMINISTRABLE
102
Coverage Group number
[1-32]
103Enable ring for calls on this button?[1=Y/0=N]
E-6 
						

							APPENDIX E: Administration Codes and Data
Table E-B.PORT/PDC Administration,Voice Terminals (Menu=1/2)
(Contd)
ACTIONDESCRIPTIONDATA
100Button to be assigned[button #]
101SEND ALL CALLS[11]
Iftype310 or311:NOT
ADMINISTRABLE
102Enable single-ring reminder?[1=Y/0=N]
103Send ring to bridged stations or to[0-2; 2]
coverage stations?
O = to bridged stations
1= to coverage stations
2 = to both
100Button to be assigned[button #]
101
CALL COVERAGE - INDIVIDUAL[12]
Iftype310 or311:NOT
ADMINISTRABLE
102PDC of the covered station[PDC]
103Enable ring for calls on this button?[1=Y/0=N]
100Button to be assigned
[button #]
101FLEXIBLEDIRECTSTATION[13]
SELECTION (FLEX DSS)
100Button to be assigned
[button #]
101DIRECT STATION SELECTION (DSS)[14]
102PDC or access code to be stored on[PDC]
this button (max. 4 digits)
100
Button to be assigned[button #]
101ACCOUNT CODE ENTRY[15]i
E-7 
						

							APPENDIX E: Administration Codes and Data
Table E-B.PORT/PDC Administration,Voice Terminals (Menu=1/2)
ACTIONDESCRIPTIONDATA
100Button to be assigned[button #]
101ALARM[16]
For types 309, 310, 311 ONLY (read-
only)
100Button to be assigned[button #]
101NIGHT SERVICE[17]
For types 309, 310, 311 ONLY
102Night Service access code[access code]
100Button to be assigned[button #]
101POSITION BUSY[18]
For types 309, 310, 311 ONLY
100Button to be assigned[button #]
101ATTENDANT MESSAGE WAITING[19]
For types 309, 310, 311 ONLY.
If type 310 or 311: read-only
100Button to be assigned[button #]
101REPERTORY DIALING[20]
100Button to be assigned[button #]
101AUTOMATIC ANSWER[21]
100Button to be assigned[button #]
101RETURN - DON’T ANSWER[22]
For type 309 ONLY (read-only).
100Button to be assigned[button #]
101RETURN - BUSY[23]
For type 309 ONLY (read-only).
E-8 
						

							APPENDIX E: Administration Codes and Data
Table E-B.PORT/POC Administration,Voice Terminals (Menu=1/2)
(Contd)
ACTION
DESCRIPTIONDATA
100Button to be assigned[button #]
101START[24]
For types 309, 310, 311 ONLY (read-
onlv)
100Button to be assigned[button #]
101
CANCEL[25]
For types 309, 310, 311 ONLY (read-
onlv)
100Button to be assigned[button #]
101RELEASE[26]
For types 309, 310, 311 ONLY (read-
onlv)
100Button to be assigned[button #]
101LOOP[27]
For type 310 or 311 ONLY (read-only)
100Button to be assigned[button #]
101INSPECT[28]
Note: this feature requires the use of a
DISPLAY voice terminal.
If type 310 or311: READ-ONLY
100Button to be assigned[button #]
101SOURCE[29]
For type 310 or 311 ONLY (read-only)
100Button to be assigned[button #]
101FORCED RELEASE[30]
For type 310 or 311 ONLY (read-only)
E-9 
						

							APPENDIX E:
Table E-B.
Administration Codes and Data
PORT/PDC Administration,
Voice Terminals (Menu=1/2)
(Contd)
ACTION
DESCRIPTION
DATA
100Button to be assigned
[button #]
101
JOIN
[31]
For type 310 or 311 ONLY (read-only)
100Button to be assigned
[button #]
101
DESTINATION
[32]
For type 310 or 311 ONLY (read-only)
100Button to be assigned
[button #]
101LOCAL
[33]
Note: this feature requires the use of a
DISPLAY voice terminal.
If type 310 or 311: READ-ONLY
100
Button to be assigned
[button #]
101
SCROLL
[34]
Note: this feature requires the use of a
DISPLAY voice terminal.
If type 310 or 311: READ-ONLY
100Button to be assigned
[button #]
101
LAST NUMBER DIALED
[35]
100Button to be assigned
[button #]
101
SYSTEM ACCESS
[36]
If
type310 or311:NOT
ADMINISTRABLE
102
Assign ring option:
[0-2; 1]
0 = no ring
1 = immediate ring
2 = delayed ring 
						

							APPENDIX E: Administration Codes and Data
Table E-B.PORT/PDC Administration,Voice Terminals (Menu=1/2)
ACTIONDESCRIPTIONDATA
100Button to be assigned[button #]
101BRIDGED ACCESS[37]
If type 309, 310, or 311: NOT
ADMINISTRABLE
102PDC of Principal station[PDC]
NOTES: Cannot have a BA for a
DTAC’s SA. Also, cannot have a BA
for your own SA.
103Button number of paired SA button on[button #] 
Principal’s station
104
Assign ring option:[0-2; 1]
0 = no ring
1 = immediate ring
2 = delayed ring
100Button to be assigned[button #]
101LEAVE WORD CALLING[38]
Note: this feature requires the use of a
Voice Messaging System
100Button to be assigned[button #]
101DIRECTORY[39]
Note: this feature requires the use of a
DISPLAY voice terminal.
100Button to be assigned[button #]
101CALL[40]
Note: this feature requires the use of a
DISPLAY voice terminal.