Xerox Phaser 6140DN User Manual

							Troubleshooting
Phaser 6140 Color Laser Printer
User Guide151
3. Lift up the duplex unit by the recessed slot provided and open the unit fully.
4. Remove the jammed paper and then confirm that there are no scraps of paper left inside the 
duplex unit or transfer belt unit.
5. Close the duplex unit and then close the printer cover.
Note:If you need to remove the entire duplex unit for some reason, after opening the printer’s 
front cover, press the front cover-release button again to release the duplex unit.
6140-031
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting
Phaser 6140 Color Laser Printer
User Guide 152
Downloaded From ManualsPrinter.com Manuals 
						

							8
Phaser 6140 Color Laser Printer
User Guide153
Printer Specifications
This chapter includes:
•Physical Specifications on page 154
•Environmental Specifications on page 155
•Electrical Specifications on page 156
•Performance Specifications on page 157
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6140 Color Laser Printer
User Guide 154
Physical Specifications
Weights and Dimensions
PartSpecifications
PrinterWidth: 400 mm (15.8 in.)
Depth: 457 mm (18.0 in.)
Height: 415.4 mm (16.3 in.)
Weight: 18.4 kg (40.57 lb.)
250-Sheet Feeder (optional)Width: 400 mm (15.8 in.)
Depth: 457 mm (18 in.)
Height: 108 mm (4.2 in.)
Weight: 4.2 kg (9.26 lb.)
Duplex Unit (optional)Width: 326.5 mm (12.9 in.)
Depth: 310 mm (12.2 in.)
Height: 153.5 mm (6.1 in.)
Weight: 1.2 Kg (2.65 lb.)
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6140 Color Laser Printer
User Guide155
Environmental Specifications
Temperature
• 10°–32°C (50°–90°F)
Relative Humidity
Note:Under extreme environment conditions (such as 10°C and 85%RH), defects can occur due to 
condensation approximately 30 minutes after the printer is turned on.
• 15–85% RH at 28°C (82°F)
Elevation
• For optimum performance, use the printer at elevations below 3,000 m (11,480 ft.).
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6140 Color Laser Printer
User Guide 156
Electrical Specifications
Power Source
• 110–127 V, 50/60 Hz, 11 A or less
• 220–240 V, 50/60 Hz, 5 A or less
Power Consumption
AC 110–127 V / 220–240 V
• Power Saver Mode (Sleep Mode): 8 W or less
• Standby Mode: 50 W or less (fuser on)
• Continuous color printing: 280 W or less
• Continuous monochrome printing: 280 W or less
This printer does not consume electric power when the power switch is turned off even if the printer is 
connected to an AC outlet.
•E
NERGY STAR qualified printer
• Default time to Power Saver is 30 minutes
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6140 Color Laser Printer
User Guide157
Performance Specifications
ItemSpecification
Wa r m - u p  t i m ePower on: 30 seconds or less.
Recovery from Power Saver mode: 25 seconds or less.
(assume temperature of 22°C / 71.6°F)
Continuous print speedColor: 18 ppm
Black & White: 20 ppm
Note:Print speed may decrease due to paper type, 
size, and printing conditions, or image quality 
adjustment.
Duplex print speed
(Phaser 6140/ND configuration only)Color: 18 ppm (Letter) / 17 ppm (A4)
Black & White: 21 ppm (letter) / 20 ppm (A4)
ResolutionStandard: 600 x 600 dpi x 1-bit
Enhanced: 600 x 600 dpi x 4-bit (PostScript driver) / 5-bit (PCL 
driver)
Downloaded From ManualsPrinter.com Manuals 
						

							Printer Specifications
Phaser 6140 Color Laser Printer
User Guide 158
Downloaded From ManualsPrinter.com Manuals 
						

							A
Phaser 6140 Color Laser Printer
User Guide159
Regulatory Information
This chapter includes:
•Electromagnetic Interference on page 160
•Material Safety Data Sheets on page 162
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory Information
Phaser 6140 Color Laser Printer
User Guide 160
Electromagnetic Interference
Xerox has tested this product to electromagnetic emission and immunity standards. These standards 
are designed to mitigate interference caused or received by this product in a typical office 
environment.
United States (FCC Regulations)
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential environment. This equipment generates, uses, and can 
radiate radio frequency energy. If it is not installed and used in accordance with these instructions, it 
may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
• Reorient or relocate the receiver.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
• Consult the dealer or an experienced radio/television technician for help.
Any changes or modifications not expressly approved by Xerox could void the users authority to 
operate the equipment. To ensure compliance with Part 15 of the FCC rules, use shielded interface 
cables.
Canada (Regulations)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Downloaded From ManualsPrinter.com Manuals