Xerox Phaser 6128MFP User Manual

Printing on Specialty Media
Phaser® 6128MFP Multifunction Printer
61
Printing Glossy Paper from the Manual Feed Slot
1. Slide the width guides of the manual feed slot to fit the appropriate media.
2. Insert the paper into the tray. 
3. If necessary, press the paper guides inward to fit the paper.
4. On the control panel, select the glossy paper type:
a. Press the System button to display the System screen.
b. Select Tray  S e t t i n g s, and then press the OK button.
c. Select the tray, and then press...

Printing Custom Size
Phaser® 6128MFP Multifunction Printer
62
Printing Custom Size
This section explains how to print on custom size paper, such as long paper using the PCL 
print driver.
Custom size paper can be loaded in each tray. The way to load custom size paper in the 
paper tray is the same as the one to load standard size paper. The way to load custom size 
paper in the manual feed slot is the same as the one to load standard size paper.
See also: 
Loading Paper in the Manual Feed Slot on page...

Printing Custom Size
Phaser® 6128MFP Multifunction Printer
63 7. If necessary, repeat steps 4 to 6 to define another custom size.
8. Click OK twice.
Printing on Custom Size Paper
Use the following procedures to print using the PCL driver.
Using the PCL Driver
The procedure to print on custom size paper using the PCL print driver is as follows:
Note: The way to display the printer Properties dialog box differs according to the 
application software. Refer to the manual of your respective application...

Printing Confidential Documents - Secure Print
Phaser® 6128MFP Multifunction Printer
64
Printing Confidential Documents - Secure Print
The Secure Print feature is enabled by default.
Note: The data stored in the RAM is erased when the printer is switched off.
About Secure Print
Secure Print is a feature that allows you to assign a password to a print job from the 
computer, send it to the printer for temporarily storing, and start printing the data from the 
control panel. You can also store the print...

Printing Confidential Documents - Secure Print
Phaser® 6128MFP Multifunction Printer
65
Secure Printing from the Printer Control Panel
This section explains the procedure to print data stored in the printer by Secure Print.
Note: You can also delete, without printing, secure print data stored in the printer. See 
System Setup on page 118.
1. On the control panel, press the Job Status button.
2. Select Wal k- U p Fea tu re s, and then press the OK button.
3. Select Secure Print, and then press the OK...

Print After Checking Printing Result - Proof Print
Phaser® 6128MFP Multifunction Printer
66
Print After Checking Printing Result - Proof Print
The Proof Print feature is enabled by default.
Note: The data stored in the RAM is erased when the printer is switched off.
About Proof Print
Proof Print is a feature that allows you to store the print data of multiple copies in the 
memory, print out only the first set to check the print result and if satisfactory, print the 
remaining copies from the control...

Print After Checking Printing Result - Proof Print
Phaser® 6128MFP Multifunction Printer
67
Proof Printing from the Printer Control Panel
This section explains the procedure to print and delete data stored in the printer by Proof Print.
1. On the control panel, press the Job Status button.
2. Select Wal k- U p Fea tu re s, and then press the OK button.
3. Select Proof Print, and then press the OK button.
4. Select your user name, and then press the OK button.
5. If you submitted more than one proof print...

Phaser® 6128MFP Multifunction Printer
68
Downloaded From ManualsPrinter.com Manuals 

Phaser® 6128MFP Multifunction Printer
69
.
This chapter includes:
•Basic Copying on page 70
•Adjusting Copying Options on page 71
Copying
5
Downloaded From ManualsPrinter.com Manuals 

Basic Copying
Phaser® 6128MFP Multifunction Printer
70
Basic Copying
Use either the document glass or the document feeder to make copies. Load the originals 
to be copied and follow the steps below to make copies. To clear the settings from the 
previous job, press the Clear All button once.
1. On the printer control panel, press the Copy button.
2. Enter the desired number of copies using the printer control panel keypad. The number 
of copies appears on the upper, right corner of the display. To reset...