Sharp Mx 3501 N Manual

48
6
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Scanning begins.
 If the original is placed on the document glass, the 
[Read-End] key appears in the touch panel. To scan only one 
original, go to step 8. To scan multiple originals, go to the 
next step.
 If the original was inserted in the document feeder tray, a 
beep will sound when scanning is completed and 
transmission will begin. Go to step 9.
Do not disconnect the USB memory until Sending data has been completed....

49
9
When Sending data has been 
completed. appears in the touch panel, 
disconnect the USB memory.
Do not disconnect the USB memory while Processing data. or Sending data. appear in the touch panel.
 When transmission to USB memory is completed, Sending data has been completed. is displayed. After a brief interval 
the message is cleared and the base screen of image send mode reappears. (The base screen of image send mode is the 
screen that appears when the [IMAGE SEND] key on the operation panel is...

50
CHANGING THE EXPOSURE AND 
EXPOSURE MODE
The exposure can be changed to match the darkness of the original. The exposure mode can be changed to match the 
original type.
1
Display the exposure setting screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Exposure] key.
2
Select the exposure and exposure mode.
(1) Touch the [Manual] key.
(2) Adjust the exposure with the   keys.
When the exposure is set to [Auto], the   keys 
cannot be used.
The exposure darkens when the   key is touched, 
and...

51
How to select the exposure
How to select the exposure mode
ExposureWhen to select
AutoThis setting automatically adjusts the exposure for light and dark parts of the original.
Manual
1 to 2Select this setting when the original consists of dark text.
3Select this setting for a normal original (neither dark nor light).
4 to 5Select this setting when the original consists mostly of faint text.
SettingDescription
Text/Prtd. PhotoThis mode provides the best balance for scanning an original which contains...

52
CHANGING THE RESOLUTION
The resolution setting can be selected.
How to select the resolution
When scanning a regular text document, a resolution settin g of 200X200dpi will create a suffi ciently legible image. When 
scanning a photo or illustration , a high resolution setting (such as 600X 600dpi) will produce a sharp and clear image. 
Note that the high-resolution se tting will result in a larger file size and transmission may not be successful if there is not 
enough space in the USB memory. In...

53
AUTOMATICALLY SCANNING BOTH SIDES 
OF AN ORIGINAL (2-Sided Original)
The automatic document feeder can be used to automatically scan both sides of an original.
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
2
Specify whether the binding style of the 
two-sided original is book style or tablet 
style.
(1) Touch the [2-Sided Booklet] key or the 
[2-Sided Tablet] key.
A book and a tablet are bound as shown below.
(2) Touch the [OK] key.
To cancel...

54
SPECIFYING THE ORIGINAL SCAN SIZE 
AND SEND SIZE (Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is 8-1/2 x 11 (A4) and the send size is auto. For example, if the 
scan size is 8-1/2 x 11 (A4) and the send size is 5-1/2 x 8-1/2 (B5), the image will be...

55
SPECIFYING THE SCAN SIZE OF THE ORIGINAL
If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original 
size manually. Place the original in the document feeder tray or on the document glass and follow the steps below.
Specifying the size using paper sizes
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The automatically detected size appears at the top of the 
[Original] key.
2...

56
Specifying the size by entering numerical values.
When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size.
The width can be from 2-1/2 to 17 (64 mm to 432 mm), and the length can be from 2-1/2 to 11-5/8 (64 mm to 297 mm).
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The automatically detected size appears at the top of the 
[Original] key.
2
Touch the [Scan Size] key.
3
Enter the...

57
SPECIFYING THE SEND SIZE OF THE ORIGINAL
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If 
a send size smalle r than the scan size is se lected, the image will be reduced.
The send size cannot be specified when [Long Size] is select ed for the scan size, or when the scan size is specified by 
numerical values.
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
2
Touch the...