Sharp Mx 3501 N Manual

88
ERASING PERIPHERAL SHADOWS ON THE 
IMAGE (Erase)
The erase function is used to erase shadow lines on images produced when scanning thick originals or books on the 
document glass. (This function erases the parts of the image where shadows tend to form. The function does not detect 
shadows and erase only the shadows.)
Scanning a thick book
Erase modes
Shadows appear here
Not using the erase 
functionUsing the erase 
function
Shadows appear in the 
image.No shadows appear.
 Shadows at the edges of the...

89
3
Touch the [Special Modes] key.
4
Touch the [Erase] key.
5
Select the erase settings.
(1) Touch the desired erase mode.
Select one of the three erase modes.
(2) Set the erasure width with the   keys.
0 to 1 (0 mm to 20 mm) can be entered.
(3) Touch the [OK] key.
Touch the [OK] key next to the [Cancel] key to complete the setting and return to the screen of step 4.
6
Touch the [Address Book] key.
To directly enter a destination address, touch the [Address 
Entry] key.
☞ENTER THE ADDRESS MANUALLY (page...

90
8
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Scanning begins.
 If you inserted the original pages in the document feeder 
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
 If you are scanning the original on the document glass, scan 
each page one page at a time.
When scanning of one page finishes, replace it with the next 
page and press the [COLOR START] key ( ) or the 
[BLACK & WHITE START] key ( ). Repeat until all pages 
have been...

91
SCANNING AN ORIGINAL AS TWO 
SEPARATE PAGES (Dual Page Scan)
The left and right sides of an original can be scanned as two separate pages. This function is useful when you wish to 
successively scan each page of a book or other bound document.
Example: Scanning the left and right pages of a book
Original scan sizeTransmitted image
11 x 17 (A3) x 1 page8-1/2 x 11 (A4) x 2 pages
 When using dual page scan, the original must be placed on the document glass.
 The send size cannot be changed.
 When...

92
3
Touch the [Special Modes] key.
4
Select Dual Page Scan.
(1) Press the [Dual Page Scan] key so that it is 
highlighted.
(2) Touch the [OK] key.
5
Touch the [Address Book] key.
To directly enter a destination address, touch the [Address 
Entry] key.
☞ENTER THE ADDRESS MANUALLY (page 23)
 When scanning to USB memory, there is no need to specify the destination. Go to step 7.
 You can touch the   key to display a list of the selected special mode settings or two-sided scanning. To return 
to the...

93
7
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Scanning begins.
When scanning finishes, place the next two open pages and 
press the [COLOR START] key ( ) or the [BLACK & 
WHITE START] key ( ). Repeat until all pages have been 
scanned and then press the [Read-End] key.
A beep will sound to indicate that scanning is finished.
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key ( ).
To cancel scanning...
Press the [STOP] key ( ) to cancel the...

94
SENDING AN IMAGE AT A SPECIFIED TIME 
(Timer Transmission)
This function lets you specify a time at which a transmission or broadcast transmission will automatically take place. 
Transmission begins automatically at the specified time.
 When a timer transmission is stored, keep the main power switch in the on position. If the main power switch is in the off 
position at the specified time, transmission will not take place.
 When performing a timer transmission, you must scan the original into memory...

95
3
Touch the [Special Modes] key.
4
Touch the [Timer] key.
5
Set the time with the   keys.
(1) Specify the day.
If you do not wish to specify a day, select [---]. In this 
case, transmission will begin when the time specified in 
(2) arrives.
(2) Specify the time (hour, minute)
Select the time in 24-hour format.
(3) Touch the [OK] key.
 When this screen is opened, the setting will show the current time. If the time is not correct, press the [CLEAR ALL] 
key ( ) to cancel the operation. Correct the...

96
7
Specify the destination.
 Touch the one-touch key for the desired destination and then 
the [To] key.
☞SPECIFYING DESTINATIONS IN THE ADDRESS BOOK 
(page 19)
 To specify a destination address in a global address book, 
touch the [Global Address Search] key and specify the 
address.
☞CALLING UP A DESTINATION FROM A GLOBAL 
ADDRESS BOOK (page 24)
8
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Scanning begins.
 If you inserted the original pages in the document feeder...

97
WHITENING FAINT COLORS IN THE IMAGE
(Suppress Background)
This feature is used to suppress light background areas.
 This function cannot be used in Internet fax mode.
 When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Select the mode that you wish to use.
(1) Touch the [Mode Switch] key.
(2) Touch the key of the mode that...