Sharp Mx 3501 N Manual

98
4
Touch the [Suppress Background] key.
Read the message that appears and then touch the [OK] key.
5
Select the suppress background setting.
(1) Adjust the background suppression level.
Three levels are available for the contrast. Touch the   
key to make the background lighter, or the   key to 
make the background darker.
(2) Touch the [OK] key.
Touch the [OK] key next to the [Cancel] key to complete the setting and return to the screen of step 4.
6
Touch the [Address Book] key.
To directly enter a...

99
8
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Scanning begins.
 If you inserted the original pages in the document feeder 
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
 If you are scanning the original on the document glass, scan 
each page one page at a time.
When scanning finishes, place the next original and press 
the [COLOR START] key ( ) or the [BLACK & WHITE 
START] key ( ). Repeat until all pages have been 
scanned and then...

100
SCANNING BOTH SIDES OF A CARD ONTO 
A SINGLE PAGE (Card Shot)
This function lets you send the front and reverse sides of a card as a single page, without the need to send each side 
separately.
 When using card shot, the original must be placed on the document glass.
 When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Place the original face down on the 
document glass.
2
Select the mode that you wish to use.
(1) Touch the [Mode Switch]...

101
4
Touch the [Card Shot] key.
5
Specify the original size.
(1) Enter the original size.
 Touch the [X] key and enter the horizontal dimension 
(X) of the original with the   keys.
 Touch the [Y] key and enter the vertical dimension (Y) 
of the original with the   keys.
(A) To return the original size to the default size, touch the 
[Size Reset] key.
(B) To automatically enlarge or reduce the image to fit the 
send size, touch the [Fit to Send Size] key. If you wish 
to scan the original at the...

102
7
Specify the destination.
 Touch the one-touch key for the desired destination and then 
the [To] key.
☞SPECIFYING DESTINATIONS IN THE ADDRESS BOOK 
(page 19)
 To specify a destination address in a global address book, 
touch the [Global Address Search] key and specify the 
address.
☞CALLING UP A DESTINATION FROM A GLOBAL 
ADDRESS BOOK (page 24)
8
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
( ) to scan the front side of the card.
If the destination is an Internet fax...

103
SCANNING MANY ORIGINALS AT ONCE
(Job Build)
When you have a large number of originals to transmit, this function lets you separate the originals into sets. The sets 
are scanned in the automatic document feeder one set at a time and then sent together as a single transmission. Use 
this function when the number of originals that you wish to scan exceeds the maximum number of sheets that can be 
inserted in the automatic document feeder at once.
When scanning originals that are separated into sets,...

104
4
Select job build mode.
(1) Touch the   keys to switch through 
the screens.
If you selected Internet fax mode, go to the 3rd screen.
(2) Touch the [Job Build] key so that it is 
highlighted.
(3) Touch the [OK] key.
5
Touch the [Address Book] key.
To directly enter a destination address, touch the [Address 
Entry] key.
☞ENTER THE ADDRESS MANUALLY (page 23)
 When scanning to USB memory, there is no need to specify the destination. Go to step 7.
 You can touch the   key to display a list of the...

105
8
Insert the next set of originals and press 
the [COLOR START] key ( ) or the 
[BLACK & WHITE START] key ( ).
Press the [START] key pressed in step 7.
Repeat until all originals have been scanned.
The exposure and resolution can be changed between sets of originals.
9
Touch the [Read-End] key in the touch 
panel.
If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the 
transmission is reserved.
If the memory becomes full during scanning, a...

106
SCANNING ORIGINALS OF DIFFERENT 
SIZES (Mixed Size Original)
This feature lets you scan originals of different sizes at the same time; for example, 8-1/2 x 14 (B4) size originals 
mixed together with 11 x 17 (A3) size originals. When scanning the originals, the machine automatically detects the 
size of each original.
This feature can only be used with the following combinations of original sizes:
11 x 17 and 8-1/2 x 14, 11 x 17 and 8-1/2 x 13, 11 x 17 and 5-1/2 x 8-1/2
(A3 and B4, A3 and B5, A4 and...

107
3
Touch the [Special Modes] key.
4
Select the mixed size original setting.
(1) Touch the   keys to switch through 
the screens.
If you selected Internet fax mode, go to the 3rd screen.
(2) Touch the [Mixed Size Original] key so that 
it is highlighted.
(3) Touch the [OK] key.
If an original scan size has been specified, a message will appear when the [Mixed Size Original] key is touched. To 
enable the Mixed Size Original setting, change the scan size setting to auto and then touch the [Mixed Size...