Sharp Mx 3501 N Manual

28
2
Change to scan mode.
(1) Touch the [Mode Switch] key.
(2) Touch the [Scan] key.
3
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The current settings of the [Exposure], [Resolution], [Original], [Color Mode], and [File Format] keys appear in the top 
half of each key. Touch each key to change the settings.
☞CHANGING THE EXPOSURE AND EXPOSURE MODE  (page 31), CHANGING THE RESOLUTION  (page 33), 
AUTOMATICALLY SCANNING  BOTH SIDES OF AN...

29
6
Specify the destination.
(1) Touch the one-touch key of the desired 
destination.
The icon on the key indicates the type of destination 
stored in the key.
: Scan to E-mail
: Scan to FTP
: Scan to Network Folder
: Scan to Desktop
(2) Touch the [To] key.
The destination is specified.
 After a one-touch key is touched, if the screen is changed without touching the [To] key, the destination is 
automatically specified.
 When performing Scan to E-mail, you can also send Cc or Bcc copies to other...

30
8
If the original was placed on the 
document glass, replace it with the next 
original and press the [COLOR START] 
key ( ) or the [BLACK & WHITE 
START] key ( ).
Repeat until all originals have been scanned.
The exposure, resolution, and scan size/send size can be changed for each original page that is scanned.
9
Touch the [Read-End] key.
A beep will sound to indicate that the operation is completed.
Open the automatic document feeder and remove the original.
If no action is taken for one minute...

31
CHANGING THE EXPOSURE AND 
EXPOSURE MODE
The exposure can be changed to match the darkness of the original. The exposure mode can be changed to match the 
original type.
1
Display the exposure setting screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Exposure] key.
2
Read the displayed message and touch 
the [OK] key.
If a broadcast transmission is performed that includes both scan mode destinations and Internet fax destinations, the 
exposure settings for Internet fax mode will have...

32
How to select the exposure
How to select the exposure mode
ExposureWhen to select
AutoThis setting automatically adjusts the exposure for light and dark parts of the original.
Manual
1 to 2Select this setting when the original consists of dark text.
3Select this setting for a normal original (neither dark nor light).
4 to 5Select this setting when the original consists mostly of faint text.
SettingDescription
Text/Prtd. PhotoThis mode provides the best balance for scanning an original which contains...

33
CHANGING THE RESOLUTION
The resolution setting can be selected.
How to select the resolution
When scanning a regular text document, a resolution settin g of 200X200dpi will create a suffi ciently legible image. When 
scanning a photo or illustration , a high resolution setting (such as 600X 600dpi) will produce a sharp and clear image. 
However, a high resolution setting will result  in a large file, and if the file is too large, transm ission may not be possible.  
In this event, reduce the size of...

34
AUTOMATICALLY SCANNING BOTH SIDES 
OF AN ORIGINAL (2-Sided Original)
The automatic document feeder can be used to automatically scan both sides of an original.
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
2
Specify whether the binding style of the 
two-sided original is book style or tablet 
style.
(1) Touch the [2-Sided Booklet] key or the 
[2-Sided Tablet] key.
A book and a tablet are bound as shown below.
(2) Touch the [OK] key.
To cancel...

35
SPECIFYING THE ORIGINAL SCAN SIZE 
AND SEND SIZE (Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is 8-1/2 x 11 (A4) and the send size is auto. For example, if the 
scan size is 8-1/2 x 11 (A4) and the send size is 5-1/2 x 8-1/2 (B5), the image will be...

36
SPECIFYING THE SCAN SIZE OF THE ORIGINAL
If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original 
size manually. Place the original in the document feeder tray or on the document glass and follow the steps below.
Specifying the size using paper sizes
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The automatically detected size appears at the top of the 
[Original] key.
2...

37
Specifying the size by entering numerical values.
When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size.
The width can be from 2-1/2 to 17 (64 mm to 432 mm), and the length can be from 2-1/2 to 11-5/8 (64 mm to 297 mm).
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The automatically detected size appears at the top of the 
[Original] key.
2
Touch the [Scan Size] key.
3
Enter the...