Samsung LN-S4096D TFT-LCD Television User Manual

							
Englis\b-19

Selecting a Menu Language

W\ben you start using your television for t\be first time, you must select t\be language w\bic\b will be used for displaying 
menus and indications.

1
P%fess the 
ME\fU
button. P%fess the  o%f  button to select “Setup”,
then p%fess the 

E\fTER
button.

2
P%fess the  o%f  to select “Language”, then p%fess the 
E\fTER
button. 

3
P%fess the  o%f  button to select “English”, “Español” o%f “%b%fançais”, then p%fess the 

E\fTER
button. 
Select “Retu%fn” by p%fessing the  o%f  button, then p%fess the 

E\fTER

button to %fetu%fn to the p%fevious menu. P%fess the 
EXIT
button to exit.

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 19 
						

							
Englis\b-20
Before your television can begin memorizing t\be available c\bannels, you must specify t\be type of signal source t\bat is connected
to t\be TV (i.e., an antenna or cable system).

Memorizing C\bannels

Your TV can memorize and store all of t\be available c\bannels for bot\b “off-air” (antenna) and cable c\bannels. 
After t\be available c\bannels are memorized, use t\be CH and CH buttons to scan t\broug\b t\be c\bannels. 
T\bis eliminates t\be need to c\bange c\bannels by entering t\be c\bannel digits. T\bere are t\bree steps for memorizing c\bannels: 
selecting a broadcast source, memorizing t\be c\bannels (automatic) and adding and deleting c\bannels (c\bannel manager).

Selecting the Video Signal Source

1
P%fess the 
ME\fU
button. P%fess the  o%f  button to select “Channel”, 
then p%fess the

E\fTER
button.

2
P%fess the  o%f  button to select “Antenna”, then p%fess the 
E\fTER

button. P%fess the  o%f  button to select “Ai%f” o%f “Cable”, then p%fess the

E\fTER
button. 

3
P%fess the  o%f  button to select “Auto P%fog%fam”, then p%fess the

E\fTER
button. 

continued...

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 20 
						

							
Englis\b-21

4
P%fess the  o%f  button to select the Antenna connection, then p%fess the 

E\fTER
button.

When selecting Cable TV system:
P%fess the 

E\fTER
button to sta%ft the auto p%fog%fam. 
By default, the cable TV system is set to “STD”.
If you want to select anothe%f type of cable system, 
p%fess the
o%f button to select  “STD”, “HRC” o%f “IRC”.

5
P%fess the 
E\fTER
button to sta%ft the auto p%fog%fam. 
The TV begins memo%fizing all available stations. 
P%fess the 

E\fTER
button at any time to inte%f%fupt the 
memo%fization p%focess.
Select “Retu%fn” by p%fessing the  o%f  button, then
p%fess the 

E\fTER
button to %fetu%fn to the p%fevious
menu. P%fess the

EXIT
button to exit.

• Ai%f : “Ai%f” antenna signal
Cable : “Cable” antenna signal
Ai%f+Cable : “Ai%f” and “Cable” antenna signals
• STD, HRC and IRC identify va%fious types of cable TV systems. Contact you%f local cable company to identify the type of cable system
that exists in you%f pa%fticula%f a%fea.
At this point the signal sou%fce has been selected.
• The TV must be connected to ai%f/cable in o%fde%f to %feceive digital  TV signals. Even if a pa%fticula%f channel is deleted f%fom the memo%fy, 
you can always tune to that channel di%fectly by using the numbe%f buttons 
on the %femote cont%fol.
• When connecting Digital Cable to a Set-Top Box, Channel Memo%fization is  done on the STB.
To view the STB on you%f TV, select the Input jack the STB is connected to 
with the 

SOURCE
button on the %femote cont%fol. (see page 32)
All available DTV and analog channels a%fe automatically sto%fed in memo%fy.

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 21 
						

							
Englis\b-22

%bo%f example, fo%f channel 7-1  (digital), 
p%fess “7”, then “
-”, then “1”.

HD indic\btes t\fe TV is receiving \b 
Digit\bl Hig\f Definition sign\bl.
SD indic\btes t\fe TV is receiving 
\b An\blog st\bnd\brd definition sign\bl.

C\banging C\bannels

Using the Channel Buttons
Using the \fumber ButtonsUsing the \brevious Channel

P%fess the CH o%f CH  button to change channels. 

P%fess the numbe%f buttons to go di%fectly to a channel. %bo%f example, to select channel 27, p%fess “2,” then “7.” The TV will chang e
channels when you p%fess the second numbe%f.
When you p%fess the CH  o%f CH  button, the TV changes channels in sequence. 
You will see all the channels that the TV has memo%fized. 
(The TV must have memo%fized at least th%fee channels.)
You will not see channels that we%fe eithe%f e%fased o%f not memo%fized.

Use the numbe%f buttons to quickly switch to any channel.  
P%fess the 
\bRE-CH
button. 
The TV changes to the last channel you we%fe watching.

Using the “-” Button

The “-” button is used to select stations that b%foadcast both a digital and analog signal.

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 22 
						

							
Englis\b-2\f

Setting Up t\be Remote to Operate Your VCR
1.
Turn off your VCR.

2.
Press t\be 
VCR 
button on your TV’s remote control.

3.
Press t\be 
SET
button on your TV’s remote control.

4.
Using t\be number buttons on your remote control, enter t\bree digits of t\be VCR code listed on
page 25 of t\bis manual for your brand of VCR. Make sure you enter t\bree digits of t\be code,
even if t\be first digit is a “0”. (If more t\ban one code is listed, try t\be first one.)

5.
Press t\be 
POWER
button on t\be remote control. Your VCR s\bould turn on if your remote is 
set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, \f and 4, but try one of t\be ot\ber codes
listed for your brand of VCR. If no ot\ber codes are listed, try eac\b VCR code, 000 t\broug\b 080.

Note on Using Remote Control Modes: VCR
W\ben your remote control is in “VCR” mode, t\be volume buttons still control your TV’s volume.

Setting Up Your Remote Control

After it \bas been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box . 
Pressing t\be corresponding button on t\be remote control allows you to switc\b between t\bese modes, and control w\bic\bever piece o f 
equipment you c\boose.
T\be remote control mig\bt not be compatible wit\b all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.

Setting Up t\be Remote to Operate Your Cable Box
1.
Turn off your cable box.

2.
Press t\be 
CABLE 
button on your TV’s remote control.

3.
Press t\be 
SET
button on your TV’s remote control.

4.
Using t\be number buttons on your remote control, enter t\bree digits of t\be cable box code 
listed on page 26 of t\bis manual for your brand of cable box. Make sure you enter t\bree digits 
of t\be code, even if t\be first digit is a “0”. (If more t\ban one code is listed, try t\be first one.)

5.
Press t\be 
POWER
button on t\be remote control. 
Your cable box s\bould turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, \f and 4, but try one of t\be ot\ber
codes listed for your brand of cable box. If no ot\ber codes are listed, try eac\b code, 
000 t\broug\b 046.

Note on Using Remote Control Modes: Cable Box
W\ben your remote control is in “CABLE” mode, t\be volume buttons still control your TV’s volume.

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 23 
						

							
Englis\b-24

Setting Up t\be Remote to Operate Your DVD
1.
Turn off your DVD.

2.
Press t\be 
DVD 
button on your TV’s remote control.

3.
Press t\be 
SET
button on your TV’s remote control.

4.
Using t\be number buttons on your remote control, enter t\bree digits of t\be DVD code listed on
pages 26~27 of t\bis manual for your brand of DVD. Make sure you enter t\bree digits of t\be code,
even if t\be first digit is a “0”. (If more t\ban one code is listed, try t\be first one.)

5.
Press t\be 
POWER
button on t\be remote control. 
Your DVD s\bould turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, \f and 4, but try one of t\be ot\ber codes
listed for your brand of DVD. If no ot\ber codes are listed, try eac\b code, 000 t\broug\b 141.

Note on Using Remote Control Modes: DVD
W\ben your remote control is in “DVD” mode, t\be volume buttons still control your TV’s volume.

Setting Up t\be Remote to Operate Your Set Top Box
1.
Turn off your STB.

2.
Press t\be 
STB 
button on your TV’s remote control.

3.
Press t\be 
SET
button on your TV’s remote control.

4.
Using t\be number buttons on your remote control, enter t\bree digits of t\be STB code listed on
page 27 of t\bis manual for your brand of STB. Make sure you enter t\bree digits of t\be code, even
if t\be first digit is a “0”. (If more t\ban one code is listed, try t\be first one.)

5.
Press t\be 
POWER
button on t\be remote control. 
Your STB s\bould turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, \f and 4, but try one of t\be ot\ber codes
listed for your brand of STB. If no ot\ber codes are listed, try eac\b code, 000 t\broug\b 074.

Note on Using Remote Control Modes: STB
W\ben your remote control is in “STB” mode, t\be volume buttons still control your TV’s volume.

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 24 
						

							
Englis\b-25

Brand

SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
%bISHER
%bUNAI
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
JVC
KENWOOD
KLH
KONIA
LG(Goldsta%f)
LIOYD
LOGIK
LXI
MAGNAVOX
MARANTZ
MARTA
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
MITSUBISHI

Code

000  001  002  003  004  005  077  078  079
020
025
004  027  032
007  026
018
022
002  003  006   008  015  055
021  056
002  003  006  008  015  055
007
002  024
002  007  008  017  021  025  056  064  066
003  010  011  012  013  014  015  016
007  026
017
025
034
001  003  006  021  022  025  030  032  034  040
047  050  052  060  063  065  066  067  069  073
018  024  028  029  048  051  061
025
002  005  017  021  056
002
007
019  025  041  042  074
021
002  007  018  019  021  026  037  041  054  056
007  008  018  021  026  037
081  082  083
007 008 018 021 026 037
070
036
006  007  008  009  010
025
038
025
021  056  059
007  008  018  021  026  037  062
006
021
006  021  024  025
034
005
019  041  075
019  034  041  046

VCR
Brand

MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
ORION
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH

Code

020
002  025
002  005  025  038
007  008  018  026  037  062  064
020
073  074  075  076
021  056  071  072
019  041  075
008
021  056  059
021  080
019  026  039  053
015  049  055
017
018
021  056
006  018  020  021  024  025  029  034  048  056
002  017  019  021  035  041  043  057  068  076
026
018  024
003  047  052  067
006  018  019  024  028  029  041  048  051
020  034  045  015
027  033  038  058
025
027  033  044
021  025  056  059
025
018  025
006
037
025  037  068
021
006  021  025  031
066
003  019  029  051  052
002  006
002
007  026
026
007  026
002
002  003  006  019  020  021  024  025  034  038  041
007  008  018  026  037
023  027  033

Remote Control Codes

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 25 
						

							
Englis\b-26

Brand

ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CYBER HOME
CINEVISION
DAEWOO
DENON
%bARENHEIT
%bISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT

Code

030
075
085
072
070  071  074  086  083  084  088  111  112
11 4
062
074
122  123
027
077  078  079  082
080  125
081
065
095
066
146
067  068
090
060
061  089  133  135
069  074
074
064  113
071
073
091  110
089

DVD
Brand

INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldsta%f)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN

Code

092
091
022  033  115  116
073
051  108  109
073
059  100  106  107
074  075
025  031
057
058
054
055
056
076  093
074  094
073
048  049  050
052
053
144
074
105
072
076  092  119
044  045
046  047
023

Brand

SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL

Code

000  001  002  003  004  005  006  007
041
003  024  031
025  030
038  039
025  030
019  023  028
026
003  022  027  037  044
019  021  023  028
004  018  020  044
014  022  040
003

CABLE BOX
Brand

REGENCY
SA
SCIENTI%bIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH

Code

015  023
042  043
042  043
022
036
016
016
032
033  034
019  021  023  028
046
017  029  035  037  045

\broduct

DVD
DVDR
BD Reco%fd
VCR COMBO
VCR Reco%fd
DHR COMBO

Code

000  001  002
003  004
005  006
007  008  009  010  011
012
013

SAMSU\fG DVD
\broduct

Home Theate%f VCR COMBO
HDD Reco%fde%f COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receive%f
AV Receive%f

Code

014  015  016
017
018
019
020
021

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 26 
						

							
Englis\b-27

Brand

ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
LG(Goldsta%f)

Code

023
043
018  034
019
035
015  016  017  019  022  045  060  061  062  065  066  067  068
074
069  070
069
018  024  032
027
025  069  070  071
069
069
065
046  047  048  063  064
069
056
022
015  017
020
020
059
063
069  070
044  073

SET-TO\b BOX
Brand

MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STAR TRAK
STS
SKY
SKY LI%bE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH

Code

016  021  036  038  039  040  041  042
016
064
018
015
047  048  064
015  016  017  021  033  036  038  039  040  041  042  067
046  049  050  063
058  059  061  062
016
065  066
051  052  053  065  066
064
057
026
020  027
031
005  006  007
064
064
054  060
015  017  028  029  030  072
060  066
016  021  037  055  056  057
024  031  068

Brand

PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC

Code

024  034  124  134  136  137  138
036  076
117  118
120
023  035  074  075  131  132
073
038
104
026  029  126  127  128  129  130  141
039  041
042
043  093
140
062
062  090
094

DVD
Brand

THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH

Code

145
028  062  076
139
072
073
096
097
098  099  101
076
075
102
032  063
040  073
103
076  121

\broduct

G%found  wave STB
Satellite STB
CABLE STB
STB DVD COMBO
Satellite STB HDD COMBO Standa%fd

Code

001  002
003
004
008
009

SAMSU\fG SET-TO\b BOX
\broduct

Satellite STB HDD COMBO P%femium
CABLE STB HDD COMBO Standa%fd
CABLE STB HDD COMBO P%femium
G%found wave STB HDD COMBO Standa%fd
G%found wave STB HDD COMBO P%femium

Code

010
011
012
013
014

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 27 
						

							
Englis\b-28

Setting t\be Clock

Setting t\be clock is necessary in order to use t\be various timer features of t\be TV.
Also, you can c\beck t\be time w\bile watc\bing t\be TV. (Just press t\be 

INFO
button.)

1
P%fess the 
ME\fU
button. P%fess the  o%f  button to select “Setup”, then 
p%fess the 

E\fTER
button.

2
P%fess the  o%f  button to select “Clock”, then p%fess the 
E\fTER
button. 

Option 1: Setting the Clock Manually

3
P%fess the  o%f  button to select “Clock Mode”, then p%fess the 

E\fTER
button. P%fess the  o%f  button to select “Manual”, then p%fess 
the 

E\fTER
button. 

4
P%fess the  o%f  button to select “Clock Set”, then p%fess the 

E\fTER
button. 

5
P%fess the  o%f  button to move to “Month”, “Day”, “Yea%f”, “Hou%f”, “Min”, o%f “am/pm”. Set the time you want by p%fessing the  o%f  button, then p%fess
the 

E\fTER
button. The time set in the Clock Set will appea%f.
Select “Retu%fn” by p%fessing the  o%f  button, then p%fess the 

E\fTER

button to %fetu%fn to the p%fevious menu. P%fess the 
EXIT
button to exit.

• You can set the month, day, yea%f, hou%f and minute di%fectly by p%fessing the  numbe%f buttons on the %femote cont%fol.
The cu%f%fent time will appea%f eve%fy time you p%fess the 
I\fFO
button.

BN68-01047F-00Eng.qxd  7/14/06  5:16 AM  Page 28