Panasonic Uf 7000 Operating Instructions Manual

							91
Copy Features
NOTE2. The default original size is LETTER. If you use the Multi-Size Feeding function, change the 
default original size to MIX in the Copier Settings for Key Operator, Parameter No. 13 
(ORIGINAL SIZE). (See page 
11 7)
354
After the copying 
is completed, 
press  
to go back to 
Fax mode.
STOP
6
6
354
78
NOTE:If the page count for the Back side does not 
match the page count for the Front side (i.e. page 
double-fed) of the 2-Sided originals, a SIDE 1&2 PAGE 
COUNTS DO NOT MATCH! and RESCAN 
ORIGINALS START WITH 1ST SIDE  will be displayed 
and all scanned data will be cancelled. If this occurs, 
restart from Step 1 and Steps 5-d to Step 7.
9
PRESS START TO
CONTINUESET ORIGINALS ON ADF
(For 2 
						

							92
Copy Features
Other Features
QChanging the Paper Size (Sheet Bypass)
The Sheet Bypass is designed to accommodate B5, A5, A4, FLS1, FLS2, Invoice, Letter, Legal Size paper and 
Transparency Film.
QEnergy Saver (Power Saver Mode, Sleep/Shutdown Mode)
231
Printing Side Up
Until stops
Push
Feed a sheet of paper at a time. 
Paper Weight: 16 - 44 lb
Adjust the width guides. 
Incorrect adjustment may cause 
the paper to wrinkle, misfeed or skew.1
2
Flashes :
Power Saver
Mode
or any keys
Lights :
Sleep/Shutdown
Mode
These modes save power while the machine is not in use.
You can select desired save mode and timer in Fax 
Parameter No.34. (See page 111)
Power Saver Mode
To  e n t e r
Automatically enters the 
Power Saver Mode after 
10 minutes (default 
setting) from the last 
operation. or
Sleep/Shutdown Mode
Automatically enters the Sleep/  
Shutdown Mode after 10 minutes  
from the last operation.
NOTE:
To adjust the default Mode timer, See page 111.
Modes Power Consumption Warm Up Time
Normal Operation Approx. 80 W –
Power Saver Approx. 12 W Approx. 19 sec.
Sleep Approx. 7 W Approx. 19 sec.
Shutdown Approx. 1 W Approx. 19 sec.
To Exit To Exit 
						

							93
Copy Features
INVOICE 
(Invoice-R)
FLS1
FLS2
A4
B5
LEGAL
4567
LTR→LTR [LTR *]
ZOOM:100% COPIES:001Select Paper Size
LETTER 
(Letter-R)
A5 (A5-R)
PAPER TYPE=PLAIN
1:PLAIN 2:HVY 3:OHP
Select the Paper Type 
For LETTER/A4
PAPER TYPE=PLAIN
1:PLAIN 2:HEAVY
Others
oror and
NOTE: 
“3:OHP” selection is displayed only when 
Letter or A4 paper size is selected.
(See page 25) 
						

							94
Setting Your Machine
Adjusting the Volume and Dialing Method (Tone or Pulse)
QSetting the Dialing Method (Tone or Pulse)
QSetting the Monitor Volume
QSetting the Ringer Volume
NOTE1. This message is displayed when optional G3 Communication Port Kit is installed.
FAX PARAMETER(1-169)
        NO.= ]
12
06 DIALING METHOD
 2:TONE       (L-1)
 : for PULSE
 : for TONE
Ex: 1
2
1
3
(See Note 1)
* MONITOR *
]
 
or
repeatedly to raise or lower the volume.
12
   MONITOR VOLUME
LOW []]]]]]]]] HIGH
3
or
repeatedly to raise or lower the volume.
MMM-dd-yyyy 15:00
                 00%    RINGER VOLUME
    (((( 
 ))))
12
To return to standby.
3 
						

							95
Setting Your Machine
06 DIALING METHOD
 1:PULSE      (L-1)
4
To return to standby.
4 
						

							96
Setting Your Machine
Programming Auto Dialer
QGeneral Description
Your machine has 2 types of Auto Dialers. The default dialer can be selected by changing the setting of Fax Parameter 
No. 119 QWERTY KEYBOARD. 
When the setting is set to:
1: One-Touch : You can manually select the desired One-Touch Key, ABBR Dialing and the Program Key.
2: Quick Name Search : You can select the station by searching the Station Name, and the Program Name.
QProgramming Address Book Dialing
NOTE1.  If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, 
press 
 (represented by a”/”). The dialing method will be changed from Pulse to 
Tone after dialing the digit “/”. 
2.  When using Address Book Dialing, you cannot use ABBR NUMBER Dialing.
ADD STATION
335
5
ENTER NAME
335
Ex: SALES
6
ADDRESS BOOK   (1-3)
ENTER NO. OR ∨ ∧
12
(When Fax Parameter No.119 is set to 2:Quick Name Search, see page 112.)
Enter Station Name using the 
QWERTY Keyboard (up to 15 
characters).
TONE 
						

							97
Setting Your Machine
ADD STATION
ENTER TEL. NO.
ADD STATION
ENTER TEL. NO.
34
7
1:ADD STATION?
PRESS SET TO SELECT
5
8
To program another station, repeat from Steps 4 
to 6.
To return to standby, press  .
(up to 280 stations, plus additional 720 with the 
optional SD Memory Card installed.)
STOP
Enter Telephone Number 
(up to 36 digits). 
						

							98
Setting Your Machine
Programming Auto Dialer
QEntering One-Touch Dialing Numbers
QEntering Abbreviated Dialing Numbers
NOTE1.  If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, 
press 
 (represented by a”/”). The dialing method will be changed from Pulse to 
Tone after dialing the digit “/”. 
2.  When using Address Book Dialing, you cannot use Abbreviated Dialing.

ENTER TEL. NO.→
1:ONE-TOUCH
2:ABBR NO.
Lower Indicator is OFF.
12
5
or
ENTER TEL. NO.
→Lower Indicator is lit.
(When Fax Parameter No. 119 is set to 1:One-Touch, see page 112.)
Enter Telephone Number 
(up to 36 digits).
3
6
ONE-TOUCH< >
PRESS ONE-TOUCH
Ex: 335When changing to Lower side (↓) 
of One-Touch button.
ENTER NAME
335
→
Ex: SALES
Enter Station Name using the 
QWERTY Keyboard (up to 15 
characters).
(When Fax Parameter No. 119 is set to “1:One-Touch”, see page 112.)
1:ONE-TOUCH
2:ABBR NO.
12
ABBR[]  ]
ENTER ABBR NO.
Ex: 
(001 - 200)022
3
TONE 
						

							99
Setting Your Machine
ONE-TOUCH< >
PRESS ONE-TOUCH
4
5
7
ONE-TOUCH<  >
PRESS ONE-TOUCH
[022]
ENTER TEL. NO.
6
To record another number, 
repeat Steps 3 to 5.
To return to standby, press 
.
STOP
[022] ENTER NAME
335
5
Enter Station Name using 
the QWERTY Keyboard  
(up to 15 characters). Enter Telephone Number 
(up to 36 digits).
1(up to 200 stations, plus addi-
tional 720 with the optional SD 
Memory Card installed.)
ABBR[]  ]
ENTER ABBR NO. To record another number, 
repeat Steps 3 to 6.
To return to standby, press 
.
STOP
Ex: SALES Ex: 3352
Select One-Touch
Ex: 13
4 
						

							100
Setting Your Machine
Programming Auto Dialer
QPrinting the Directory Sheet
After programming the One-Touch dialing numbers, you can print the Directory Sheet which includes each station’s name. 
This sheet is available when the Fax Parameter No.119 is set to 1:One-Touch. (see page 
11 2)
* PRINTING *
DIRECTORY SHEET
Your machine prints the 
Directory Sheet.
12