Panasonic Kx Taw848 PC Cprogramming Manual
Have a look at the manual Panasonic Kx Taw848 PC Cprogramming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
2.7 [1] Configuration
66 PC Programming Manual
Default
112 ms
Value Range
8 × n (n=3–63) ms
Maintenance Console Location
2.7.3 [1-1] Slot—Extension Card Property
Programming Manual References
None
Feature Manual References
None
Flash Timing - Range
Specifies the maximum length that a signal sent from an SLT can be for the PBX to recognize it as a
hookswitch flash signal.
Default
904 ms
Value Range
8 × n (n=3–191) ms
Maintenance Console Location
2.7.3 [1-1] Slot—Extension Card Property
Programming Manual...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-65.png "Page 66
2.7 [1] Configuration
66 PC Programming Manual
Default
112 ms
Value Range
8 × n (n=3–63) ms
Maintenance Console Location
2.7.3 [1-1] Slot—Extension Card Property
Programming Manual References
None
Feature Manual References
None
Flash Timing - Range
Specifies the maximum length that a signal sent from an SLT can be for the PBX to recognize it as a
hookswitch flash signal.
Default
904 ms
Value Range
8 × n (n=3–191) ms
Maintenance Console Location
2.7.3 [1-1] Slot—Extension Card Property
Programming Manual...")
![Page 67
2.7 [1] Configuration
PC Programming Manual 67
Programming Manual References
None
Feature Manual References
None
2.7.4 [1-1] Slot—Extension Port
Various settings can be programmed for each extension port.
To change the status of extension ports, click Command. To view total numbers of each type of
extension connected, click Por t Type View.
Slot
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-66.png "Page 67
2.7 [1] Configuration
PC Programming Manual 67
Programming Manual References
None
Feature Manual References
None
2.7.4 [1-1] Slot—Extension Port
Various settings can be programmed for each extension port.
To change the status of extension ports, click Command. To view total numbers of each type of
extension connected, click Por t Type View.
Slot
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port...")
![Page 68
2.7 [1] Configuration
68 PC Programming Manual
Feature Manual References
1.5.7 Extension Port Configuration
Por t Type
Indicates the port type (reference only).
Default
Current port type
Value Range
APT: APT port (PLC)
SLT: SLT port (SLC)
Hybrid: Hybrid port (HLC)
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
1.5.7 Extension Port Configuration
Telephone Type
Indicates the connected telephone type (reference only).
The number...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-67.png "Page 68
2.7 [1] Configuration
68 PC Programming Manual
Feature Manual References
1.5.7 Extension Port Configuration
Por t Type
Indicates the port type (reference only).
Default
Current port type
Value Range
APT: APT port (PLC)
SLT: SLT port (SLC)
Hybrid: Hybrid port (HLC)
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
1.5.7 Extension Port Configuration
Telephone Type
Indicates the connected telephone type (reference only).
The number...")
![Page 69
2.7 [1] Configuration
PC Programming Manual 69
Connection
Indicates the por t status (reference only).
This column offers two ways to open the screen to select the por t command as follows:
Click the desired cell in the column.
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The por t is out of service.
Fault: The port is not communicating with the PBX.
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-68.png "Page 69
2.7 [1] Configuration
PC Programming Manual 69
Connection
Indicates the por t status (reference only).
This column offers two ways to open the screen to select the por t command as follows:
Click the desired cell in the column.
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The por t is out of service.
Fault: The port is not communicating with the PBX.
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port...")
![Page 70
2.7 [1] Configuration
70 PC Programming Manual
Feature Manual References
None
Extension Name
Specifies the extension name of the port.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
None
DPT Type—Type (for Hybrid port)
Selects the port type.
To change the port type of an extension port, follow the steps below:
1.Set the status of the extension port to OUS.
2.Change the port type...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-69.png "Page 70
2.7 [1] Configuration
70 PC Programming Manual
Feature Manual References
None
Extension Name
Specifies the extension name of the port.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
None
DPT Type—Type (for Hybrid port)
Selects the port type.
To change the port type of an extension port, follow the steps below:
1.Set the status of the extension port to OUS.
2.Change the port type...")
![Page 71
2.7 [1] Configuration
PC Programming Manual 71
Feature Manual References
1.19.3 Voice Mail (VM) Group
DPT Type—Location No. (for Hybrid port)
Specifies the location number of the connected DSS Console.
Default
1
Value Range
1–4
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
None
DPT Type—VM Unit No. (for Hybrid port)
Selects the unit number of the connected VPS.
Default
1
Value Range
1
Maintenance Console Location
2.7.4 [1-1]...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-70.png "Page 71
2.7 [1] Configuration
PC Programming Manual 71
Feature Manual References
1.19.3 Voice Mail (VM) Group
DPT Type—Location No. (for Hybrid port)
Specifies the location number of the connected DSS Console.
Default
1
Value Range
1–4
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
None
DPT Type—VM Unit No. (for Hybrid port)
Selects the unit number of the connected VPS.
Default
1
Value Range
1
Maintenance Console Location
2.7.4 [1-1]...")
![Page 72
2.7 [1] Configuration
72 PC Programming Manual
Value Range
1–4
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
1.19.3 Voice Mail (VM) Group
2.7.5 [1-1] Slot—Extension Port—Port Command
Commands for the extension ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.5 [1-1] Slot—Extension Port—Port Command
Programming Manual References
2.7.4 [1-1]...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-71.png "Page 72
2.7 [1] Configuration
72 PC Programming Manual
Value Range
1–4
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
1.19.3 Voice Mail (VM) Group
2.7.5 [1-1] Slot—Extension Port—Port Command
Commands for the extension ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.5 [1-1] Slot—Extension Port—Port Command
Programming Manual References
2.7.4 [1-1]...")
![Page 73
2.7 [1] Configuration
PC Programming Manual 73
Maintenance Console Location
2.7.5 [1-1] Slot—Extension Port—Port Command
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
2.7.6 [1-1] Slot—Extension Port—Port Type View
Displays the number of connected telephones and Cell Stations (CSs).
This screen can only be accessed in Interactive mode.
Ty p e
Indicates the types of telephone (reference only).
Default
Not applicable.
Value Range
APT, SLT, DSS Console, VM,...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-72.png "Page 73
2.7 [1] Configuration
PC Programming Manual 73
Maintenance Console Location
2.7.5 [1-1] Slot—Extension Port—Port Command
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
2.7.6 [1-1] Slot—Extension Port—Port Type View
Displays the number of connected telephones and Cell Stations (CSs).
This screen can only be accessed in Interactive mode.
Ty p e
Indicates the types of telephone (reference only).
Default
Not applicable.
Value Range
APT, SLT, DSS Console, VM,...")
![Page 74
2.7 [1] Configuration
74 PC Programming Manual
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
2.7.7 [1-1] Slot—LCO Card Property
The properties of the analog CO line cards can be specified.
Outgoing Guard Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the
line.
Default
3 s
Value Range
3–6 s
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-73.png "Page 74
2.7 [1] Configuration
74 PC Programming Manual
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
2.7.7 [1-1] Slot—LCO Card Property
The properties of the analog CO line cards can be specified.
Outgoing Guard Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the
line.
Default
3 s
Value Range
3–6 s
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual...")
![Page 75
2.7 [1] Configuration
PC Programming Manual 75
Feature Manual References
None
CO Feed Back Tone
Specifies whether the pulse feedback tone is turned on or not. For outgoing CO line calls, audible
tones can be heard as the dialed number is sent out, which informs the extension user that the
number has been dialed.
Default
Ye s
Value Range
No, Yes
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
Bell Detection—Bell Start...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-74.png "Page 75
2.7 [1] Configuration
PC Programming Manual 75
Feature Manual References
None
CO Feed Back Tone
Specifies whether the pulse feedback tone is turned on or not. For outgoing CO line calls, audible
tones can be heard as the dialed number is sent out, which informs the extension user that the
number has been dialed.
Default
Ye s
Value Range
No, Yes
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
Bell Detection—Bell Start...")
![Page 76
2.7 [1] Configuration
76 PC Programming Manual
Default
6.0 s
Value Range
1.0 s–15.0 s
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
Pulse / DTMF Dial—DTMF Inter-digit Pause
Specifies the length of the DTMF inter-digit pause. This allows the telephone company to have
enough time to accept the dialed digits correctly.
Default
112 ms
Value Range
64 + 16 × n (n=0–15) ms
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card...](http://img.usermanuals.tech/thumb/58/64586/w64_kx-taw848_en_adv_pcprog_v3_om_d-75.png "Page 76
2.7 [1] Configuration
76 PC Programming Manual
Default
6.0 s
Value Range
1.0 s–15.0 s
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
Pulse / DTMF Dial—DTMF Inter-digit Pause
Specifies the length of the DTMF inter-digit pause. This allows the telephone company to have
enough time to accept the dialed digits correctly.
Default
112 ms
Value Range
64 + 16 × n (n=0–15) ms
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card...")
2.7 [1] Configuration PC Programming Manual 71 Feature Manual References 1.19.3 Voice Mail (VM) Group DPT Type—Location No. (for Hybrid port) Specifies the location number of the connected DSS Console. Default 1 Value Range 1–4 Maintenance Console Location 2.7.4 [1-1] Slot—Extension Port Programming Manual References None Feature Manual References None DPT Type—VM Unit No. (for Hybrid port) Selects the unit number of the connected VPS. Default 1 Value Range 1 Maintenance Console Location 2.7.4 [1-1] Slot—Extension Port Programming Manual References None Feature Manual References 1.19.3 Voice Mail (VM) Group DPT Type—VM Port No. (for Hybrid port) Specifies the VM port number for the port. Default 1
2.7 [1] Configuration 72 PC Programming Manual Value Range 1–4 Maintenance Console Location 2.7.4 [1-1] Slot—Extension Port Programming Manual References None Feature Manual References 1.19.3 Voice Mail (VM) Group 2.7.5 [1-1] Slot—Extension Port—Port Command Commands for the extension ports can be programmed. INS Puts the port in service. Default Not applicable. Value Range Not applicable. Maintenance Console Location 2.7.5 [1-1] Slot—Extension Port—Port Command Programming Manual References 2.7.4 [1-1] Slot—Extension Port Feature Manual References None OUS Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of repair. Default Not applicable. Value Range Not applicable.
2.7 [1] Configuration PC Programming Manual 73 Maintenance Console Location 2.7.5 [1-1] Slot—Extension Port—Port Command Programming Manual References 2.7.4 [1-1] Slot—Extension Port Feature Manual References None 2.7.6 [1-1] Slot—Extension Port—Port Type View Displays the number of connected telephones and Cell Stations (CSs). This screen can only be accessed in Interactive mode. Ty p e Indicates the types of telephone (reference only). Default Not applicable. Value Range APT, SLT, DSS Console, VM, Other, CS Maintenance Console Location 2.7.6 [1-1] Slot—Extension Port—Port Type View Programming Manual References 2.7.4 [1-1] Slot—Extension Port Feature Manual References None Total Count Indicates the total number of each type of telephone and CS connected to the PBX (reference only). CSs are counted on the basis of the number of extension ports to which they are connected. Default Not applicable. Value Range Not applicable. Maintenance Console Location 2.7.6 [1-1] Slot—Extension Port—Port Type View
2.7 [1] Configuration 74 PC Programming Manual Programming Manual References 2.7.4 [1-1] Slot—Extension Port Feature Manual References None 2.7.7 [1-1] Slot—LCO Card Property The properties of the analog CO line cards can be specified. Outgoing Guard Time Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the line. Default 3 s Value Range 3–6 s Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None Feature Manual References None First Dial Timer (CO) Specifies the minimum time that the PBX waits after seizing a CO line, before sending the dialed digits to the telephone company. This allows the telephone company to have enough time to accept the dialed digits correctly. Default 1.0 s Value Range 0.5 × n (n=1–16) s Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None
2.7 [1] Configuration PC Programming Manual 75 Feature Manual References None CO Feed Back Tone Specifies whether the pulse feedback tone is turned on or not. For outgoing CO line calls, audible tones can be heard as the dialed number is sent out, which informs the extension user that the number has been dialed. Default Ye s Value Range No, Yes Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None Feature Manual References None Bell Detection—Bell Start Detection Timer Specifies the minimum length of a bell signal that can be recognized by the PBX as the bell signal sent from the telephone company, before the PBX detects an arriving call. Default 144 ms Value Range 24 × n (n=1–50) ms Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None Feature Manual References None Bell Detection—Bell Off Detection Timer Specifies the duration of the bell off detection timer. If the PBX receives no bell signal from the telephone company for the length of time specified here, the PBX treats the call as lost.
2.7 [1] Configuration 76 PC Programming Manual Default 6.0 s Value Range 1.0 s–15.0 s Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None Feature Manual References None Pulse / DTMF Dial—DTMF Inter-digit Pause Specifies the length of the DTMF inter-digit pause. This allows the telephone company to have enough time to accept the dialed digits correctly. Default 112 ms Value Range 64 + 16 × n (n=0–15) ms Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None Feature Manual References None Pulse / DTMF Dial—Pulse Inter-digit Pause Specifies the length of the pulse inter-digit pause. This allows the telephone company to have enough time to accept the dialed digits correctly. Default 830 ms Value Range 630 ms, 830 ms, 1030 ms Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property
2.7 [1] Configuration PC Programming Manual 77 Programming Manual References None Feature Manual References None Low Speed Pulse Dial—Pulse % Break Specifies the % break for a low speed pulse dial. This is the ratio between the break (on-hook) signal and make (off-hook) signal in a pulse dial. Default 60 % Value Range Other, 60 %, 67 % Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References 2.7.8 [1-1] Slot—LCO Port Feature Manual References None Low Speed Pulse Dial—Break Width Specifies the maximum length of the break signal in a low speed pulse dial. Low Speed Pulse Dial— Pulse % Break on this screen determines the value that can be specified here. Default 60 ms Value Range 4 × n (n=6–20) ms Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References 2.7.8 [1-1] Slot—LCO Port Feature Manual References None
2.7 [1] Configuration 78 PC Programming Manual Low Speed Pulse Dial—Make Width Specifies the minimum length of the make signal in a low speed pulse dial. Low Speed Pulse Dial— Pulse % Break on this screen determines the value that can be specified here. Default 40 ms Value Range 4 × n (n=3–15) ms Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References 2.7.8 [1-1] Slot—LCO Port Feature Manual References None High Speed Pulse Dial—Pulse % Break Specifies the % break for a high speed pulse dial. This is the ratio between the break (on-hook) signal and make (off-hook) signal in a pulse dial. Default 60 % Value Range Other, 60 %, 67 % Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References 2.7.8 [1-1] Slot—LCO Port Feature Manual References None High Speed Pulse Dial—Break Width Specifies the maximum length of the break signal in a high speed pulse dial. High Speed Pulse Dial—Pulse % Break on this screen determines the value that can be specified here. Default 32 ms
2.7 [1] Configuration PC Programming Manual 79 Value Range 4 × n (n=4–18) ms Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References 2.7.8 [1-1] Slot—LCO Port Feature Manual References None High Speed Pulse Dial—Make Width Specifies the minimum length of the make signal in a high speed pulse dial. High Speed Pulse Dial— Pulse % Break on this screen determines the value that can be specified here. Default 20 ms Value Range 4 × n (n=3–15) ms Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References 2.7.8 [1-1] Slot—LCO Port Feature Manual References None Pulse Type Selects the type of pulse dial transmission appropriate to your area. Default Normal Value Range Normal, Sweden, New Zealand Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None
2.7 [1] Configuration 80 PC Programming Manual Feature Manual References None Option Card Equipment—Option 1 and Option 2 Indicates the type of the card that is installed on the LCOT card (reference only). Default Current option card type Value Range None, Caller ID Card Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References 2.7.8 [1-1] Slot—LCO Port—Caller ID Detection Feature Manual References 1.3.1 Caller ID Caller ID—Caller ID Signalling Selects the type of Caller ID signalling provided by the telephone company. Default FSK Value Range FSK (Frequency Shift Keying), FSK (with Visual Caller ID), DTMF Maintenance Console Location 2.7.7 [1-1] Slot—LCO Card Property Programming Manual References None Feature Manual References 1.3.1 Caller ID Caller ID—Max Receive Time Specifies the maximum number of Caller ID series that are sent from the network. Default 1