Home > Panasonic > Wireless PBX > Panasonic Kx Taw848 PC Cprogramming Manual

Panasonic Kx Taw848 PC Cprogramming Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Kx Taw848 PC Cprogramming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 468
    							2.10 [4] Extension
    PC Programming Manual 291
    Maintenance Console Location
    2.10.2 [4-1-2] Wired Extension—FWD/DND
    Programming Manual References
    None
    Feature Manual References
    1.6.6 FWD (Call Forwarding)
    FWD No Answer Timer
    Specifies the length of time that an incoming call rings at the extension before the call is forwarded.
    Default
    15 s
    Value Range
    0–120 s
    Maintenance Console Location
    2.10.2 [4-1-2] Wired Extension—FWD/DND
    Programming Manual References
    None
    Feature Manual References
    1.6.6 FWD (Call Forwarding)
    2.10.3 [4-1-3] Wired Extension—Speed Dial
    Personal Speed Dialing allows extension users to dial frequently dialed numbers using two-digit 
    speed dialing numbers (00–09). A maximum of 10 Personal Speed Dialing numbers can be 
    programmed for each extension. Select the desired extension from the Extension Number / Name 
    list.
    Speed Dialing Name
    Specifies the name of the Personal Speed Dialing number to call using the Personal Speed Dialing 
    Directory shown on the extensions display.
    Default
    Not stored.
    Value Range
    Max. 20 characters 
    						
    							2.10 [4] Extension
    292 PC Programming Manual
    Maintenance Console Location
    2.10.3 [4-1-3] Wired Extension—Speed Dial
    Programming Manual References
    None
    Feature Manual References
    1.16.3 Speed Dialing, Personal
    Dialing Number
    Specifies the number to be dialed by the Personal Speed Dialing number.
    Default
    Not stored.
    Value Range
    Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
    Maintenance Console Location
    2.10.3 [4-1-3] Wired Extension—Speed Dial
    Programming Manual References
    None
    Feature Manual References
    1.16.3 Speed Dialing, Personal
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Each flexible CO button can be customized to allow one-touch access to a certain feature. A 
    maximum of 12 flexible CO buttons can be customized for each extension. Select the desired 
    extension from the Extension Number / Name list.
     
    To copy the flexible CO button settings of an extension to another extension, click Copy To. 
    For more information on flexible buttons, see 1.6.3 Flexible Buttons in the Feature Manual.
    Ty p e
    Specifies the feature to be assigned to the flexible CO button.
    Default
    Key Location 1–8: Single CO 
    Key Location 9–12: Not Stored
    Value Range
    Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/
    DND (Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), 
    Group Fwd (Internal), Account, Conference, Terminate, EFA, Call Park, Call Log, Log-in/Log-out,  
    						
    							2.10 [4] Extension
    PC Programming Manual 293
    Hurry-up, Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, Time 
    Service - Automatic/Manual, Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.10.5 [4-1-4] Wired Extension—Flexible Button—Flexible Button Data Copy
    Feature Manual References
    1.6.3 Flexible Buttons
    Parameter Selection (for Single CO)
    Specifies the CO line to be accessed.
    Default
    1
    Value Range
    1–8
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.10.5 [4-1-4] Wired Extension—Flexible Button—Flexible Button Data Copy
    Feature Manual References
    1.3.11 CO Line Access
    Parameter Selection (for Group CO)
    Specifies the trunk group to be accessed.
    Default
    1
    Value Range
    1–64
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.9.1 [3-1-1] Trunk Group—TRG Settings 
    						
    							2.10 [4] Extension
    294 PC Programming Manual
    Feature Manual References
    1.3.11 CO Line Access
    Parameter Selection (for Call Park)
    Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone.
    Default
    Automatic
    Value Range
    Automatic, Specific
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    None
    Feature Manual References
    1.3.5 Call Park
    Parameter Selection (for Log-in/Log-out)
    Specifies which incoming call distribution groups that the extension belongs to are logged in to or 
    logged out from.
    Default
    None
    Value Range
    None: The incoming call distribution group is selected manually. 
    All: All incoming call distribution groups that the extension belongs to. 
    Incoming Group: A pre-specified incoming call distribution group
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    None
    Feature Manual References
    1.9.3 ICD Group Features—Log-in/Log-out
    Parameter Selection (for Time Service)
    Selects which time modes are switched manually. 
    						
    							2.10 [4] Extension
    PC Programming Manual 295
    Default
    All
    Value Range
    All (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.8.5 [2-4] Week Table
    Feature Manual References
    1.17.4 Time Service
    Parameter Selection (for TRS Level Change)
    Specifies the TRS level to be used temporarily on a certain extension.
    Default
    1
    Value Range
    1–7
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.8.11 [2-7-1] Class of Service—COS Settings—TRS
    2.13 [7] TRS
    Feature Manual References
    1.4.4 Dial Tone Transfer
    1.17.5 TRS (Toll Restriction)
    Parameter Selection (for Time Service - Automatic/Manual)
    Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic.
    Default
    1
    Value Range
    1–8 
    						
    							2.10 [4] Extension
    296 PC Programming Manual
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.8.5 [2-4] Week Table
    Feature Manual References
    1.17.4 Time Service
    Ext No. / Floating Ext. No. (for DSS)
    Specifies the number of an extension to be accessed.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    None
    Feature Manual References
    None
    Ext No. / Floating Ext. No. (for ICD Group)
    Specifies the floating extension number of an incoming call distribution group to be accessed.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
    Feature Manual References
    1.9.1 ICD GROUP FEATURES 
    						
    							2.10 [4] Extension
    PC Programming Manual 297
    Ext No. / Floating Ext. No. (for Message Waiting)
    Specifies the number of an extension or floating extension number of an incoming call distribution 
    group for which messages are checked. If this cell is left empty, the extension will check its own 
    messages only.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    None
    Feature Manual References
    1.11.3 Message Waiting
    Ext No. / Floating Ext. No. (for Group FWD (Both))
    Specifies the floating extension number of an incoming call distribution group for which both intercom 
    and CO line calls are forwarded.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
    Feature Manual References
    1.6.6 FWD (Call Forwarding)
    Ext No. / Floating Ext. No. (for Group FWD (External))
    Specifies the floating extension number of an incoming call distribution group for which CO line calls 
    are forwarded.
    Default
    Not stored. 
    						
    							2.10 [4] Extension
    298 PC Programming Manual
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
    Feature Manual References
    1.6.6 FWD (Call Forwarding)
    Ext No. / Floating Ext. No. (for Group FWD (Internal))
    Specifies the floating extension number of an incoming call distribution group for which intercom calls 
    are forwarded.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
    Feature Manual References
    1.6.6 FWD (Call Forwarding)
    Ext No. / Floating Ext. No. (for Call Log)
    Specifies the extensions own number or the floating extension number of an incoming call distribution 
    group for which call log information is displayed. If the cell is left empty, the extension will display its 
    own call log information.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button 
    						
    							2.10 [4] Extension
    PC Programming Manual 299
    Programming Manual References
    None
    Feature Manual References
    1.3.3 Call Log, Incoming
    Ext No. / Floating Ext. No. (for Log-in/Log-out)
    Specifies the floating extension number of an incoming call distribution group to log-in to or log-out 
    from.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings
    Feature Manual References
    1.9.3 ICD Group Features—Log-in/Log-out
    Ext No. / Floating Ext. No. (for Hurry-up)
    Specifies the floating extension number of the incoming call distribution group whose longest waiting 
    call will be redirected (Manual Queue Redirection).
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Overflow No Answer
    Feature Manual References
    1.9.5 ICD Group Features—Queuing 
    						
    							2.10 [4] Extension
    300 PC Programming Manual
    Ext No. / Floating Ext. No. (for Two-way Record)
    Specifies the floating extension number of the VM (DPT) group containing the extensions mailbox.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.9.15 [3-7-2] VM(DPT) Group—Unit Settings
    Feature Manual References
    1.19.4 Voice Mail DPT (Digital) Integration
    Ext No. / Floating Ext. No. (for Two-way Transfer)
    Specifies the floating extension number of the VM (DPT) group containing the desired mailbox.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9)
    Maintenance Console Location
    2.10.4 [4-1-4] Wired Extension—Flexible Button
    Programming Manual References
    2.9.15 [3-7-2] VM(DPT) Group—Unit Settings
    Feature Manual References
    1.19.4 Voice Mail DPT (Digital) Integration
    Ext No. / Floating Ext. No. (for Voice Mail Transfer)
    Specifies the floating extension number of the VM (DTMF/DPT) group containing the desired mailbox.
    Default
    Not stored.
    Value Range
    Max. 4 digits (consisting of 0–9) 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Kx Taw848 PC Cprogramming Manual