Panasonic Kx Ta824 Feature Guide

							3.3 PT Programming
Feature Guide 211
LCS Recording Mode Set [620]
Feature & Programming References
1.18.1 Voice Mail APT Integration
BV Resource [621]
Feature & Programming References
1.14.7 Built-in Voice Message (BV)
BV for Extension [622]
Feature & Programming References
1.14.7 Built-in Voice Message (BV)
620NEXTextension jack no. name*STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(    Stop recording/
Keep recording)
621NEXTextension jack no.
extension jack no.01-02=
Resource 1
extension jack no.03-24=
Resource 2
STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(Resource 1/2)
NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(     Enable/
Disable)
622 
						

							3.3 PT Programming
212 Feature Guide
BV Access Code through CO Line [625]
Notes
 A voice message access code should be different from the corresponding extension number. If the 
voice message access code is the same as an extension number, dialing that number will access 
the extension, not the voice message area. 
 A code that starts with a number already assigned as another code cannot be used. For example, 
if you assign the codes 1234 and 12345, 12345 cannot be selected since 1234 will be 
recognized first.
Feature & Programming References
1.14.7 Built-in Voice Message (BV)
BGM Control for APT [626]
Feature & Programming References
1.14.4 Background Music (BGM)
SLT Ring Wait Time for New Call [627]
625NEXTextension 
jack no.STOREEND
(01…
24)
SELECT
NEXTPREVor
To continue
To continue
voice message 
access code
4…10 digits 
(0
…9, #)
extension jack no. 01-24=
#101-#124
626NEXTextension jack no. name*STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(    Enable/
Disable)
627NEXTextension jack no. name*STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(0…
15 s)
0 s 
						

							3.3 PT Programming
Feature Guide 213
Feature & Programming References
1.15.1 Caller ID
SLT Caller ID [628]
Feature & Programming References
1.15.1 Caller ID
SLT Fixed Bell Pattern [629]
Feature & Programming References
1.1.3.3 Ring Tone Pattern Selection
1.15.1 Caller ID
628NEXTextension jack no. name*STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(Enable/
    Disable)
629NEXTextension jack no. name*STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(    Disable/
Single/Double) 
						

							3.3 PT Programming
214 Feature Guide
Doorphone Ringing—Day/Night/Lunch [700-702]
Feature & Programming References
1.14.1 Doorphone Call
Door Opener—Day/Night/Lunch [703-705]
Feature & Programming References
1.14.2 Door Open
7XNEXTSTOREEND
(1…
4/    ) (01…
24/    )
(    Enable/
Disable)
SELECT
or
SELECT#
Go to another jack number
Go to another doorphone number
Go to next or prev.
jack number
➞
Go to next or prev. doorphone number
NEXTPREVorTo continue
To continue
To continue
To continue
➞
doorphone no.extension jack no.
(00…
02)
00: for day
01: for night
02: for lunch
7XNEXTSTOREEND
(1…
4/    ) (01…
24/    )
(   Enable/
Disable)
SELECT
or
SELECT#
Go to another jack number
Go to another door opener number
Go to next or prev. 
jack number
➞
Go to next or prev. door opener number
NEXTPREVorTo continue
To continue
To continue
To continue
➞
door opener no.extension jack no.
(03…
05)
03: for day
04: for night
05: for lunch 
						

							3.3 PT Programming
Feature Guide 215
Doorphone Ring Tone Pattern [706]
Feature & Programming References
1.1.3.3 Ring Tone Pattern Selection
1.14.1 Doorphone Call
Doorphone Access Tone [707]
Feature & Programming References
1.9.2 Room Monitor
1.14.1 Doorphone Call
Doorphone Ring Time [708]
Feature & Programming References
1.14.1 Doorphone Call
706NEXTdoorphone no.STOREEND
(1…
4/    )
SELECT
(Single/Double/
Triple/S-Double)
NEXTPREVor
To continue
SELECT
To continue
707NEXTdoorphone no.STOREEND
(1…
4/    )
SELECT
(    Enable/
Disable)
NEXTPREVor
To continue
SELECT
To continue
708NEXTdoorphone no.STOREEND
(1…
4/    )
SELECT
(   15/30 s)
NEXTPREVor
To continue
SELECT
To continue 
						

							3.3 PT Programming
216 Feature Guide
Door Open Duration [709]
Feature & Programming References
1.14.2 Door Open
Doorphone Ring/Chime [710]
Feature & Programming References
1.14.3 Doorbell/Door Chime
Doorphone Ringing—Day/Night/Lunch [700-702]
Doorphone Chime Assignment [711]
Feature & Programming References
1.14.3 Doorbell/Door Chime
Doorphone Ring/Chime [710]
709NEXTdoor opener no.END
(1…
4/    )
SELECT
(1…8 s)
STORE
NEXTPREVor
To continue
SELECT
To continue5 s
710NEXTdoorphone no. name*STOREEND
(1…
4/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(    Ring/Chime/
Ring & Chime)
711NEXTdoorphone no. name*STOREEND
(1…
4/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(Relay1…
4)
Relay4 
						

							3.3 PT Programming
Feature Guide 217
Doorphone Chime Pattern [712]
Feature & Programming References
1.14.3 Doorbell/Door Chime
4.2.1 Tones/Ring Tones
SMDR RS-232C Parameter [800]
Notes
 * Select None when the printer does not require error checking.
 The following combinations are invalid.
 If any of the above invalid combinations are selected, an alarm tone will be heard.
Feature & Programming References
1.19.1 Station Message Detail Recording (SMDR)
ParityWord lengthStop bit length
Mark82
Space81
Space82
712NEXTdoorphone no. name*STOREEND
(1…
4/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(Pattern 1…
8)
Pattern 1
800NEXT
(    CR+LF/CR) (1200/2400/
 4800/    9600 B)
(Mark/Space/
 Even/Odd/
 None*)(    1 bit/2 bits) (7/    8 bits)
END
SELECTSTORENEXTSELECTSTORE
NEXTSELECTSTORENEXTSELECTSTORENEXTSELECTSTORE
  
  
CR: Carriage Return
LF: Line Feed 
						

							3.3 PT Programming
218 Feature Guide
SMDR Parameter [801]
Feature & Programming References
1.19.1 Station Message Detail Recording (SMDR)
Incoming/Outgoing Call Selection for Printing [802]
Note
Outgoing Call: On (Print all calls)/Off (No printing)/Toll (Print toll calls only)
Incoming Call: On (Print all calls)/Off (No printing)
Feature & Programming References
1.19.1 Station Message Detail Recording (SMDR)
TRS—COS 2-5 Denied Code [302-305]
Secret Number SMDR Print Suppression [803]
Feature & Programming References
1.19.1 Station Message Detail Recording (SMDR)
System Speed Dialing Number [001]
System Data Dump [804]


801NEXTpage length
(4…
99 lines)
(0…
95 lines)
END
STORE
NEXTskip perforationSTORE


66 lines
0 line
802NEXT
(    On/Off/Toll) (    On/Off)
ENDSELECTSTORENEXTSELECTSTORE
 
803NEXT
(    No Printing/
Printing)
ENDSELECTSTORE
804NEXTENDSELECT
To continue
(All para/
System para/
Speed dial/
Stop output)
STORE 
						

							3.3 PT Programming
Feature Guide 219


Feature & Programming References
1.19.1 Station Message Detail Recording (SMDR)
SMDR Account Code [805]
Feature & Programming References
1.8.2 Toll Restriction (TRS) Override by Account Code
1.19.1 Station Message Detail Recording (SMDR)
Account Code [310]
Account Code Mode [605]
SMDR Language [806]
Feature & Programming References
1.19.1 Station Message Detail Recording (SMDR)
BV Total Recording Time [807]
Note
The recording quality depends on the setting time. 
20 (min): High; 30: Normal; 60: Low
804NEXTENDSELECTSTORESTORE
To continue(1…
8/    )
CO line no.
(CO para)
804NEXTENDSELECTSTORESTORE
To continue(1…
24/    )
extension jack no.
(Extn. para)
804NEXTENDSELECTSTORESTORE
To continue(1…
2/    )
DSS console no.
(DSS para)
805NEXT
(    CODE/INDEX)
ENDSELECTSTORE
806NEXTENDSELECTSTORE
    (    English/
     Spanish)
807NEXTSELECTSTOREEND
(20/    30/60 min) 
						

							3.3 PT Programming
220 Feature Guide
Feature & Programming References
1.14.7 Built-in Voice Message (BV)
BV Card Initialization [808]
Feature & Programming References
1.14.7 Built-in Voice Message (BV)
Caller ID [900]
Note
The DISA Delayed Answer Time for the outside (CO) lines enabled here will always be 6 seconds even 
if 0 s or 3 s is selected in 
DISA Delayed Answer Time [504].
Feature & Programming References
1.15.1 Caller ID
Caller ID Area Code [901]
Feature & Programming References
1.15.1 Caller ID
1.15.2 Incoming Call Log
Caller ID Modification for Local Calls [902]
808NEXTSTOREEND
900NEXTCO line no.name*STOREEND
(1…
8/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(Enable/
    Disable)
90 1NEXTcode no.area codeSTOREEND
(1…
5) Max. 6 digits
(0…
9)
SELECT
NEXTPREVor
To continue
To continue
All-Not stored