Panasonic Kx Ta824 Feature Guide

							3.3 PT Programming
Feature Guide 201
DISA Delayed Answer Time [504]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
DISA Wait Time after OGM [505]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
DISA Busy Mode [506]


Feature & Programming References
1.14.5 Outgoing Message (OGM)
1.14.6 Direct Inward System Access (DISA)
Hunting Group Set [100]
DISA Intercept Mode [507]
Feature & Programming References
1.1.1.2 Intercept Routing
1.14.6 Direct Inward System Access (DISA)
1.18 Voice Mail Features
DISA Ring Time before Intercept [508]
504NEXTSELECTSTOREEND
(0/    3/6/12 s)
505NEXTSELECTSTOREEND
(0/    5/10/15 s)
506NEXTSELECTSTOREEND
(     Disconnect/
Call Waiting)
506NEXTSELECTSTOREENDOGM no.
(1…
8)
(DISA)
507NEXTSELECTSTOREEND
(    Intercept/
Disconnect)
508NEXTSELECTSTOREEND
(10/    20/30/
40/60/120 s) 
						

							3.3 PT Programming
202 Feature Guide
Feature & Programming References
1.1.1.2 Intercept Routing
1.14.6 Direct Inward System Access (DISA)
DISA Intercept Mode [507]
DISA Ring Time after Intercept [509]
Feature & Programming References
1.1.1.2 Intercept Routing
1.14.6 Direct Inward System Access (DISA)
DISA Intercept Mode [507]
DISA Ring Time before Intercept [508]
DISA No Dial Mode [510]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
DISA Security Mode [511]
Note
Trunk Security: Requires the caller to enter a DISA security code assigned in DISA Security Code [512] 
before making an outside (CO) line call. 
All Security: Requires the caller to enter a DISA security code before making either an outside (CO) 
line or intercom call.
 
No Security: Allows the caller to make either an outside (CO) line or intercom call without entering a 
DISA security code.
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
509NEXTSELECTSTOREEND
(10/    20/30/
40/60/120 s)
510NEXTSTOREEND
(    Intercept/
Disconnect)
SELECT
511NEXTSELECTSTOREEND
(     Trunk/All/
None Security) 
						

							3.3 PT Programming
Feature Guide 203
DISA Security Code [512]
WARNING 
There is a risk that fraudulent telephone calls will be made using the Outside-to-Outside (CO-to-CO) 
Line Call feature of DISA.
 
The cost of such calls will be billed to the owner/renter of the PBX. 
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a)Enabling DISA security (Trunk Security or All Security).
b)Maintaining the secrecy of passwords.
c)Selecting passwords that are complex and random, so that they cannot be easily guessed.
d)Changing passwords regularly. 
Note
The number of digits for DISA security codes is selected in DISA Security Code Digits [530].
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
DISA Security Mode [511]
Cyclic Tone Detection [513]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
FAX Tone Detection [514]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
FAX Connection [503]
51 2NEXTcode no.security codeSTOREEND
(1…
4) 4…
10 digits
(0…
9)
SELECT
NEXTPREVor
To continue
To continue
All-Not stored
513NEXTSELECTSTOREEND
(Disable/
2/3/    4 times)
514NEXTSELECTSTOREEND
(    1/2 time(s)) 
						

							3.3 PT Programming
204 Feature Guide
Intercept Time for Internal DISA [515]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
DISA No Dial Mode [510]
DISA Incoming Assignment [516]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
DISA AA Wait Time [517]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
DISA Built-in AA [501]
DISA Tone after Security Code [518]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
DISA Security Code [512]
DISA Security Code Digits [530]
515NEXTSELECTSTOREEND
(    3/6/9 s)
516NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(    Enable/
Disable)
517NEXTSELECTSTOREEND
(1…5 s)
2 s
518NEXTSELECTSTOREEND
(    Enable/Disable)
530NEXTSELECTSTOREEND
(4…10 digits)
4 digits 
						

							3.3 PT Programming
Feature Guide 205
Note
When this setting is changed, DISA security codes that have already been assigned in DISA Security 
Code [512] will be cleared.
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
DISA Ringback Tone [531]
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
3-level AA Assignment [540-549]
Notes
 This program is available only when 3-level AA is selected for each AA number in DISA Built-in 
AA [501].
 Only when you select  as the third AA number, you can select 3-level AA in the next step.
Feature & Programming References
1.14.6 Direct Inward System Access (DISA)
Clear All OGMs of DISA [599]
Feature & Programming References
1.14.5 Outgoing Message (OGM)
531NEXTSELECTSTOREEND
(    Ringback Tone/
Hold Music)
5XNEXTEND
(40…
49)
SELECT
NEXTPREVor
To continue
To continue
name*SELECT
(Jack/GRP/
3-level AA/
Not Stored)(0…
9,    )
second 
AA no.third 
AA no.
(0…
9)
(01…
24)
extension 
jack no.
extension 
group no.
(1…
8) or
[     : Skip]
STORE
Go to another third AA number
Go to another second AA numberGo to next or prev. 
third AA number
[40-49: AA no. 0-9]
599NEXTSTOREEND 
						

							3.3 PT Programming
206 Feature Guide
Extension Group [600]
Feature & Programming References
1.2.1 Idle Extension Hunting
2.2.2 Group
TRS-COS—Day/Night/Lunch [601-603]
Feature & Programming References
1.8.1 Toll Restriction (TRS)
2.2.1 Class of Service (COS)
Extension Name [604]
Feature & Programming References
1.5.1.1 Intercom Call
3.3.1 Programming Instructions—Entering Characters
600NEXTextension jack no.extension group no.STOREEND
(1…8)(01…
24/    )
To continue
To continue
SELECT
NEXTPREVor
1
6XNEXTextension jack no.COS no.STOREEND
(1…5)(01…
24/    )
To continue
To continue
SELECT
NEXTPREVor
(01…
03)
01: for day
02: for night
03: for lunch1
604NEXTextension jack no.extension nameSTOREEND
Max. 
10 characters(01…
24)
To continue
To continue
SELECT
NEXTPREVor
All-Not stored 
						

							3.3 PT Programming
Feature Guide 207
Account Code Mode [605]
Feature & Programming References
1.5.2.3 Account Code Entry
1.8.2 Toll Restriction (TRS) Override by Account Code
Account Code [310]
Call Transfer to CO Line [606]
Feature & Programming References
1.10.1 Call Transfer
1.12.1.2 Conference
Call Forwarding to CO Line [607]
Feature & Programming References
1.3.1.2 Call Forwarding (FWD)
605NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(    Option/Forced/
Verify-All/Verify-Toll)
606NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(Enable/
    Disable)
607NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(Enable/
    Disable) 
						

							3.3 PT Programming
208 Feature Guide
Executive Busy Override [608]
Feature & Programming References
1.7.2 Executive Busy Override
DND Override [609]
Feature & Programming References
1.3.1.3 Do Not Disturb (DND)
Paralleled Telephone [610]
Feature & Programming References
1.9.9 Paralleled Telephone
608NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(Enable/
    Disable)
609NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(Enable/
    Disable)
610NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(Enable/
    Disable) 
						

							3.3 PT Programming
Feature Guide 209
TAM Extension [611]
Feature & Programming References
1.4.1.3 Call Pickup
Room Monitor [612]
Feature & Programming References
1.9.2 Room Monitor
LCD Language [615]
Feature & Programming References
1.17.4 Display Information
611NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(Enable/
    Disable)
612NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue
(Enable/
    Disable)
615NEXTextension jack no.STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
(    English/
Spanish)
To continue
To continue 
						

							3.3 PT Programming
210 Feature Guide
Wireless PT Port Assignment [617]
Note
If Connect is not assigned for the jack that is connected to the Panasonic wireless phone, the wireless 
phone may function incorrectly.
Message Waiting for Another Extension [618]
Feature & Programming References
1.16.1 Message Waiting
SLT Message Waiting [619]
Feature & Programming References
1.16.1 Message Waiting
617NEXTextension jack no. name*STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(    Not Connect/
Connect)
618NEXTextension jack no. name*STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(    Enable/
Disable)
619NEXTextension jack no. name*STOREEND
(01…
24/    )
SELECT
SELECT
NEXTPREVor
To continue
To continue(Enable/
    Disable)