Panasonic Kx Ta824 Feature Guide
Have a look at the manual Panasonic Kx Ta824 Feature Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 176
3.3 PT Programming
176 Feature Guide
DSS Console Jack Assignment [003]
Notes
To delete (disable) an extension jack number, press CLEAR in the extension jack number step.
The same jack number cannot be assigned to 2 DSS Consoles.
Do not assign extension jack 01 (manager extension) as the DSS Console jack.
The extension jack number preassigned as a paired telephone in Console Paired Telephone [004]
should not be assigned in this program.
Feature & Programming References
1.17.1 Fixed Buttons
2.1.1...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-175.png "Page 176
3.3 PT Programming
176 Feature Guide
DSS Console Jack Assignment [003]
Notes
To delete (disable) an extension jack number, press CLEAR in the extension jack number step.
The same jack number cannot be assigned to 2 DSS Consoles.
Do not assign extension jack 01 (manager extension) as the DSS Console jack.
The extension jack number preassigned as a paired telephone in Console Paired Telephone [004]
should not be assigned in this program.
Feature & Programming References
1.17.1 Fixed Buttons
2.1.1...")
![Page 177
3.3 PT Programming
Feature Guide 177
Note
With Transfer: Press the DSS button to transfer an outside (CO) line call.
Without Transfer: Press the TRANSFER button, then the DSS button to transfer an outside (CO) line
call.
Feature & Programming References
1.10.1 Call Transfer
1.17.1 Fixed Buttons
Time Service Switching Mode [006]
Feature & Programming References
2.2.3 Time Service
Time Service Start Time [007]
Time Service Start Time [007]
Notes
This program is available when switching mode is enabled...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-176.png "Page 177
3.3 PT Programming
Feature Guide 177
Note
With Transfer: Press the DSS button to transfer an outside (CO) line call.
Without Transfer: Press the TRANSFER button, then the DSS button to transfer an outside (CO) line
call.
Feature & Programming References
1.10.1 Call Transfer
1.17.1 Fixed Buttons
Time Service Switching Mode [006]
Feature & Programming References
2.2.3 Time Service
Time Service Start Time [007]
Time Service Start Time [007]
Notes
This program is available when switching mode is enabled...")
![Page 178
3.3 PT Programming
178 Feature Guide
Operator Assignment [008]
Note
To delete (disable) an extension jack number, press CLEAR in the extension jack number step.
Feature & Programming References
2.2.4 Operator/Manager Features
Extension Number [009]
Note
The same extension jack number may not be entered 2 times.
Feature & Programming References
1.5.1.1 Intercom Call
2.3.4 Feature Numbering
LCD Time Display [010]
Note
The following settings and features use 12-hour format even if 24-hour format is assigned...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-177.png "Page 178
3.3 PT Programming
178 Feature Guide
Operator Assignment [008]
Note
To delete (disable) an extension jack number, press CLEAR in the extension jack number step.
Feature & Programming References
2.2.4 Operator/Manager Features
Extension Number [009]
Note
The same extension jack number may not be entered 2 times.
Feature & Programming References
1.5.1.1 Intercom Call
2.3.4 Feature Numbering
LCD Time Display [010]
Note
The following settings and features use 12-hour format even if 24-hour format is assigned...")
![Page 179
3.3 PT Programming
Feature Guide 179
System Speed Dialing Name [011]
Feature & Programming References
1.6.1.5 Speed Dialing—Personal/System
3.3.1 Programming Instructions—Entering Characters
KX-T7710 One-touch Dialing [013]
Notes
Any feature number can be stored in a One-touch button. However, the feature numbers for
Personal Speed Dialing and System Speed Dialing do not function.
This feature is not available when the KX-T7710 is connected in parallel with a PT.
Feature & Programming References...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-178.png "Page 179
3.3 PT Programming
Feature Guide 179
System Speed Dialing Name [011]
Feature & Programming References
1.6.1.5 Speed Dialing—Personal/System
3.3.1 Programming Instructions—Entering Characters
KX-T7710 One-touch Dialing [013]
Notes
Any feature number can be stored in a One-touch button. However, the feature numbers for
Personal Speed Dialing and System Speed Dialing do not function.
This feature is not available when the KX-T7710 is connected in parallel with a PT.
Feature & Programming References...")
![Page 180
3.3 PT Programming
180 Feature Guide
Extension Group [600]
Hunting Type [101]
Note
This program is available when the extension group is enabled in Hunting Group Set [100].
Feature & Programming References
1.2.1 Idle Extension Hunting
DTMF Integration Port [102]
Feature & Programming References
1.18.2 Voice Mail Inband (DTMF) Integration
DTMF Integration [103]
Note
If a KX-TVS series VPS/KX-TVA series VPS is connected to the PBX, select Enable in this program,
so that Inband (DTMF) Integration between...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-179.png "Page 180
3.3 PT Programming
180 Feature Guide
Extension Group [600]
Hunting Type [101]
Note
This program is available when the extension group is enabled in Hunting Group Set [100].
Feature & Programming References
1.2.1 Idle Extension Hunting
DTMF Integration Port [102]
Feature & Programming References
1.18.2 Voice Mail Inband (DTMF) Integration
DTMF Integration [103]
Note
If a KX-TVS series VPS/KX-TVA series VPS is connected to the PBX, select Enable in this program,
so that Inband (DTMF) Integration between...")
![Page 181
3.3 PT Programming
Feature Guide 181
SLT Hold Mode [104]
Feature & Programming References
1.11.1 Call Hold
Conference Tone [105]
Feature & Programming References
1.7.2 Executive Busy Override
1.12.1.2 Conference
External Pager Access Tone [106]
Feature & Programming References
1.13.1 Paging
DTMF Receiver Check [107]
Note
This program enables each DTMF receiver to check whether it is operating normally or not.
DTMF receiver number:
1–2: checking extension jacks 01–08
3–4: checking extension jacks 09–16...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-180.png "Page 181
3.3 PT Programming
Feature Guide 181
SLT Hold Mode [104]
Feature & Programming References
1.11.1 Call Hold
Conference Tone [105]
Feature & Programming References
1.7.2 Executive Busy Override
1.12.1.2 Conference
External Pager Access Tone [106]
Feature & Programming References
1.13.1 Paging
DTMF Receiver Check [107]
Note
This program enables each DTMF receiver to check whether it is operating normally or not.
DTMF receiver number:
1–2: checking extension jacks 01–08
3–4: checking extension jacks 09–16...")
![Page 182
3.3 PT Programming
182 Feature Guide
Note
This program enables a locked extension to send a flash/recall signal during a conversation with an
outside party.
CO Indicator [109]
Note
This program is available for the extension(s) assigned not to ring in Flexible Ringing—Day/Night/Lunch
[408-410], to answer incoming outside (CO) line calls.
Flash/Recall Key Mode [110]
Feature & Programming References
1.9.6 Flash/Recall
1.9.7 External Feature Access (EFA)
Music on Hold [111]
Feature & Programming...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-181.png "Page 182
3.3 PT Programming
182 Feature Guide
Note
This program enables a locked extension to send a flash/recall signal during a conversation with an
outside party.
CO Indicator [109]
Note
This program is available for the extension(s) assigned not to ring in Flexible Ringing—Day/Night/Lunch
[408-410], to answer incoming outside (CO) line calls.
Flash/Recall Key Mode [110]
Feature & Programming References
1.9.6 Flash/Recall
1.9.7 External Feature Access (EFA)
Music on Hold [111]
Feature & Programming...")
![Page 183
3.3 PT Programming
Feature Guide 183
Extension Ring Tone Pattern [115]
Feature & Programming References
1.1.3.3 Ring Tone Pattern Selection
1.5.1.1 Intercom Call
4.2.1 Tones/Ring Tones
Call Pickup Tone [117]
Feature & Programming References
1.4.1.3 Call Pickup
Pulse Restriction [118]
Note
It is programmable whether pulse dialing is sent or not to the telephone company during a conversation
with an outside party when Pulse or Call Block mode is enabled in
Dial Mode [401].
Redialing after Pulse to Tone...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-182.png "Page 183
3.3 PT Programming
Feature Guide 183
Extension Ring Tone Pattern [115]
Feature & Programming References
1.1.3.3 Ring Tone Pattern Selection
1.5.1.1 Intercom Call
4.2.1 Tones/Ring Tones
Call Pickup Tone [117]
Feature & Programming References
1.4.1.3 Call Pickup
Pulse Restriction [118]
Note
It is programmable whether pulse dialing is sent or not to the telephone company during a conversation
with an outside party when Pulse or Call Block mode is enabled in
Dial Mode [401].
Redialing after Pulse to Tone...")
![Page 184
3.3 PT Programming
184 Feature Guide
Note
This program selects the ringback tone pattern for outgoing intercom calls and for incoming outside
(CO) line calls (including a DISA call).
Feature & Programming References
1.5.1.1 Intercom Call
1.14.6 Direct Inward System Access (DISA)
4.2.1 Tones/Ring Tones
VM 1 APT Port [130]
Notes
To change the current setting (other than Disable), select Disable, then select the desired
setting.
This program is not available when Enable is selected in DTMF Integration...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-183.png "Page 184
3.3 PT Programming
184 Feature Guide
Note
This program selects the ringback tone pattern for outgoing intercom calls and for incoming outside
(CO) line calls (including a DISA call).
Feature & Programming References
1.5.1.1 Intercom Call
1.14.6 Direct Inward System Access (DISA)
4.2.1 Tones/Ring Tones
VM 1 APT Port [130]
Notes
To change the current setting (other than Disable), select Disable, then select the desired
setting.
This program is not available when Enable is selected in DTMF Integration...")
![Page 185
3.3 PT Programming
Feature Guide 185
1.1.3.3 Ring Tone Pattern Selection
SLT Ring Bell-on Time [143]
SLT Ring Bell-on Time [143]
Notes
This program selects the length of the bell-on signal of an SLT. This determines the ring tone
pattern for incoming calls to SLTs, combined with the setting in
SLT Ring/Silence Ratio [142].
This program also determines the maximum number of digits of an SLT Caller ID number, when
DTMF1 or DTMF2 is selected in
SLT Caller ID Signaling Type [150].
Feature &...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-184.png "Page 185
3.3 PT Programming
Feature Guide 185
1.1.3.3 Ring Tone Pattern Selection
SLT Ring Bell-on Time [143]
SLT Ring Bell-on Time [143]
Notes
This program selects the length of the bell-on signal of an SLT. This determines the ring tone
pattern for incoming calls to SLTs, combined with the setting in
SLT Ring/Silence Ratio [142].
This program also determines the maximum number of digits of an SLT Caller ID number, when
DTMF1 or DTMF2 is selected in
SLT Caller ID Signaling Type [150].
Feature &...")
![Page 186
3.3 PT Programming
186 Feature Guide
SMS Routing Table—Extension [147]
Note
Each location 1–8 has a maximum of 10 extensions.
Feature & Programming References
1.16.3 Call Routing for Fixed Line SMS
SLT Caller ID Signaling Type [150]
Feature & Programming References
1.15.1 Caller ID
SLT Caller ID Line Access Number [151]
Feature & Programming References
1.15.1 Caller ID
Automatic Time Adjustment [152]
Feature & Programming References
2.3.3 Automatic Time Adjustment
147NEXTextension jack no.STOREEND...](http://img.usermanuals.tech/thumb/58/64566/w64_kx-ta824_en_feature_guide_v1_om_d-185.png "Page 186
3.3 PT Programming
186 Feature Guide
SMS Routing Table—Extension [147]
Note
Each location 1–8 has a maximum of 10 extensions.
Feature & Programming References
1.16.3 Call Routing for Fixed Line SMS
SLT Caller ID Signaling Type [150]
Feature & Programming References
1.15.1 Caller ID
SLT Caller ID Line Access Number [151]
Feature & Programming References
1.15.1 Caller ID
Automatic Time Adjustment [152]
Feature & Programming References
2.3.3 Automatic Time Adjustment
147NEXTextension jack no.STOREEND...")
3.3 PT Programming Feature Guide 181 SLT Hold Mode [104] Feature & Programming References 1.11.1 Call Hold Conference Tone [105] Feature & Programming References 1.7.2 Executive Busy Override 1.12.1.2 Conference External Pager Access Tone [106] Feature & Programming References 1.13.1 Paging DTMF Receiver Check [107] Note This program enables each DTMF receiver to check whether it is operating normally or not. DTMF receiver number: 1–2: checking extension jacks 01–08 3–4: checking extension jacks 09–16 5–6: checking extension jacks 17–24 Connection References 4.1.3 Operation Flash/Recall Mode for a Locked Extension [108] 104NEXTSELECTSTOREEND ( Hold-1/Hold-2/ Hold-3) 105NEXTSELECTSTOREEND ( Enable/Disable) 106NEXTSELECTSTOREEND ( Enable/Disable) 107NEXTDTMF receiver no. name*STOREEND (1… 6) SELECT NEXTPREVor To continue ( Enable/Disable) 108NEXTSELECTSTOREEND (Enable/ Disable)
3.3 PT Programming 182 Feature Guide Note This program enables a locked extension to send a flash/recall signal during a conversation with an outside party. CO Indicator [109] Note This program is available for the extension(s) assigned not to ring in Flexible Ringing—Day/Night/Lunch [408-410], to answer incoming outside (CO) line calls. Flash/Recall Key Mode [110] Feature & Programming References 1.9.6 Flash/Recall 1.9.7 External Feature Access (EFA) Music on Hold [111] Feature & Programming References 1.11.4 Music on Hold 1.14.4 Background Music (BGM) DSS Lamp Mode [112] Note Enable: FWD—Flashing slowly, DND—Flashing at moderate speed Disable: FWD—Off, DND—Off Feature & Programming References 1.17.3 LED Indication 109NEXTSELECTSTOREEND ( Enable/Disable) 110NEXTSELECTSTOREEND (MODE1: EFA mode/ MODE2: Flash/Recall mode) 111NEXTSELECTSTOREEND ( External/Tone) 112NEXTSELECTSTOREEND ( Enable/Disable)
3.3 PT Programming Feature Guide 183 Extension Ring Tone Pattern [115] Feature & Programming References 1.1.3.3 Ring Tone Pattern Selection 1.5.1.1 Intercom Call 4.2.1 Tones/Ring Tones Call Pickup Tone [117] Feature & Programming References 1.4.1.3 Call Pickup Pulse Restriction [118] Note It is programmable whether pulse dialing is sent or not to the telephone company during a conversation with an outside party when Pulse or Call Block mode is enabled in Dial Mode [401]. Redialing after Pulse to Tone Conversion [119] Feature & Programming References 1.5.2.4 Dial Type Selection TRS Check for * and # [125] Feature & Programming References 1.8.1 Toll Restriction (TRS) Ringback Tone Pattern [128] 115NEXTSELECTSTOREEND (Single/ Double/ Triple) 117NEXTSELECTSTOREEND ( Enable/Disable) 118NEXTSELECTSTOREEND ( Enable/Disable) 119NEXTSELECTSTOREEND (Enable/ Disable) 125NEXTSELECTSTOREEND ( Enable/Disable) 128NEXTSELECTSTOREEND (Single 3 s/ Single 5 s/ Double 3 s/Double 5 s)
3.3 PT Programming 184 Feature Guide Note This program selects the ringback tone pattern for outgoing intercom calls and for incoming outside (CO) line calls (including a DISA call). Feature & Programming References 1.5.1.1 Intercom Call 1.14.6 Direct Inward System Access (DISA) 4.2.1 Tones/Ring Tones VM 1 APT Port [130] Notes To change the current setting (other than Disable), select Disable, then select the desired setting. This program is not available when Enable is selected in DTMF Integration [103]. Feature & Programming References 1.18.1 Voice Mail APT Integration VM 2 APT Port [131] Notes To change the current setting (other than Disable), select Disable, then select the desired setting. This program is not available when Enable is selected in DTMF Integration [103]. Feature & Programming References 1.18.1 Voice Mail APT Integration SLT Ring/Silence Ratio [142] Note This program selects the ratio between the bell signals of an SLT (a set of bell-on and bell-off). Feature & Programming References 130NEXTSELECTSTOREEND (Port7/Port7 & 8/ Disable) 131NEXTSELECTSTOREEND (Port15/ Port15 & 16/ Disable) 142NEXTSELECTSTOREEND (1:2/ 1:3/1:4) [On:Off]
3.3 PT Programming Feature Guide 185 1.1.3.3 Ring Tone Pattern Selection SLT Ring Bell-on Time [143] SLT Ring Bell-on Time [143] Notes This program selects the length of the bell-on signal of an SLT. This determines the ring tone pattern for incoming calls to SLTs, combined with the setting in SLT Ring/Silence Ratio [142]. This program also determines the maximum number of digits of an SLT Caller ID number, when DTMF1 or DTMF2 is selected in SLT Caller ID Signaling Type [150]. Feature & Programming References 1.1.3.3 Ring Tone Pattern Selection 1.15.1 Caller ID SMS Center Number for Receiving [145] Feature & Programming References 1.16.3 Call Routing for Fixed Line SMS SMS Routing Table—CO [146] Feature & Programming References 1.16.3 Call Routing for Fixed Line SMS 143NEXTSELECTSTOREEND (1000…2000 ms) [100 ms increments] 1300 ms 145NEXTSMS center no.STOREEND Max. 16 digits (0… 9, , #) Not stored 146NEXTCO line no. name*STOREEND SELECT SELECT NEXTPREVor To continue To continue( Disable/1… 8)(1… 8)
3.3 PT Programming 186 Feature Guide SMS Routing Table—Extension [147] Note Each location 1–8 has a maximum of 10 extensions. Feature & Programming References 1.16.3 Call Routing for Fixed Line SMS SLT Caller ID Signaling Type [150] Feature & Programming References 1.15.1 Caller ID SLT Caller ID Line Access Number [151] Feature & Programming References 1.15.1 Caller ID Automatic Time Adjustment [152] Feature & Programming References 2.3.3 Automatic Time Adjustment 147NEXTextension jack no.STOREEND SELECT SELECT NEXTPREVor To continue To continue ( Disable/1… 8)(01… 24) 150NEXTSELECTSTOREEND ( FSK1 [During ring]/ FSK2 [RP-AS]/ DTMF1 [Immediately]/ DTMF2 [During ring]) 151NEXTSELECTSTOREEND ( Enable/Disable) 152NEXTSELECTSTOREEND ( Enable/Disable)
3.3 PT Programming Feature Guide 187 Hold Recall Time [200] Feature & Programming References 1.11.1 Call Hold 1.11.2 Call Park Transfer Recall Time [201] Feature & Programming References 1.10.1 Call Transfer Call Forwarding Start Time [202] Feature & Programming References 1.3.1.2 Call Forwarding (FWD) Hot Line Waiting Time [203] Feature & Programming References 1.6.1.6 Hot Line Call Duration Counter Start [204] Feature & Programming References 1.19.1 Station Message Detail Recording (SMDR) 200NEXTSELECTSTOREEND ( 30 s/ 1/1.5/2/3/4/5/6 min/ Disable) 201NEXTSELECTSTOREEND (15/ 30 s/ 1/2 min) 202NEXTSELECTSTOREEND (5/10/ 15/ 20 s delay) 203NEXTSELECTSTOREEND (0…4 s) 3 s 204NEXTSELECTSTOREEND (5/ 10/15/20/25/30/35/ 40/45/50 s after dialing/ Instantly)
3.3 PT Programming 188 Feature Guide CO-to-CO Line Call Duration [205] Feature & Programming References 1.9.8 Outside-to-Outside (CO-to-CO) Line Call Duration Dialing Start Time [206] Feature & Programming References 1.5.3.3 Outside (CO) Line Access Inter-digit Time [208] Feature & Programming References 1.8.1 Toll Restriction (TRS) No Dial Disconnection [211] No Dial Disconnection [211] Feature & Programming References 1.8.1 Toll Restriction (TRS) Inter-digit Time [208] BV Recording Time [214] Feature & Programming References 1.14.7 Built-in Voice Message (BV) 205NEXTSTOREEND (1…32 min) time 10 min 206NEXTSELECTSTOREEND ( 0/250/500/750/ 1000/1250/1500 ms) 208NEXTSELECTSTOREEND (5/ 10/15/20 s) 211NEXTSELECTSTOREEND (Enable/ Disable) 214NEXTtimeSTOREEND (1… 60 min) 5 min
3.3 PT Programming Feature Guide 189 Common/Personal OGM Recording Time [215] Note This program selects the maximum recording time for each personal/common OGM. Feature & Programming References 1.14.7 Built-in Voice Message (BV) Carrier Exception Code [300] Feature & Programming References 1.8.1 Toll Restriction (TRS) TRS—System Speed Dialing Class [301] Feature & Programming References 1.6.1.5 Speed Dialing—Personal/System 1.8.1 Toll Restriction (TRS) TRS—COS 2-5 Denied Code [302-305] 215NEXTtimeSTOREEND (1… 15 min) 3 min 300NEXTcode no.carrier codeSTOREEND (01… 20) SELECT NEXTPREVor To continue To continue Max. 10 digits (0… 9, , #, x) All-Not stored 301NEXTSELECTSTOREEND (Class-1…5) Class-1 3XNEXTcode no.phone no.STOREEND (01… 20) SELECT NEXTPREVor To continue To continue Max. 11 digits (0… 9, , #, x)(02… 05) 02: for Class 2 03: for Class 3 04: for Class 4 05: for Class 5 All-Not stored
3.3 PT Programming 190 Feature Guide Feature & Programming References 1.8.1 Toll Restriction (TRS) TRS—Exception Code [306] Feature & Programming References 1.8.1 Toll Restriction (TRS) TRS—COS 2-5 Denied Code [302-305] Emergency Number [309] Feature & Programming References 1.5.2.2 Emergency Call 1.8.1 Toll Restriction (TRS) Account Code [310] Feature & Programming References 306NEXTcode no.phone no.STOREEND (01… 80) SELECT NEXTPREVor To continue To continue Max. 11 digits (0… 9, , #, x) All-Not stored 309NEXTemergency no.code no.STOREEND (1… 5) Max. 24 digits (0… 9) SELECT NEXTPREVor To continue To continue code no. 1=911 code no. 2-5=Not stored 310NEXTaccount codecode no.STOREEND (01… 50) 4 digits (0… 9) SELECT NEXTPREVor To continue To continue All-Not stored