Panasonic Kx Ps8100 Operating Instructions Manual

							251 Care and Maintenance
Low Yellow TonerYellow toner will need to be replaced soon.
Lower Left side door
OpenClose Optional Cassette side door.
Lower Tray
EmptyAdd media to Lower tray.
Lower Tray
Not installedInstall Lower tray.
Magenta Toner
EmptyReplace magenta toner.
Magenta Toner Cartridge 
Not installedInstall magenta toner cartridge.
Media Tray
EmptyAdd media to media tray.
Media Tray
Not installedInstall media tray.
Memory Error 0Cycle Power.
Memory Error 1Cycle Power.
Memory Error 2Cycle Power.
Memory Error 3Cycle Power.
Memory Error 4Cycle Power.
Memory Error 5Cycle Power.
Memory Error 6Cycle Power.
Memory Error 7Cycle Power.
Memory Error 8Cycle Power.
Memory Shortage
Page SimplifiedNot enough memory to finish printing. 
Change printing resolution to 600 x 600 dpi if 
you selected higher resolution. 
or 
Install additional memory in the printer.
Middle Tray
EmptyAdd media to Middle tray.
Middle Tray
Not installedInstall Middle tray.
MessageCorrective Action/Additional Information 
						

							252 Care and Maintenance
Multi-Purpose Tray
EmptyAdd media to multi-purpose tray.
NVRAM Error
Settings ChangedNVRAM hardware error. Cycle Power. If 
printer does not function normally, call for 
service.
NVRAM Full
Settings LostHardware error of Flash DIMM. Cycle 
Power. If printer does not function normally, 
call for service.
Oil Roll
Not installedInstall oil web unit.
Oil Roll
wearing outOil supply roll will need to be replaced soon.
Oil Roll
Worn outReplace the oil web unit.
Out of Memory
Job ClearedNot enough memory to finish printing. 
Change printing resolution to 600 x 600 dpi if 
you selected higher resolution. 
or 
Install additional memory in the printer.
Out of Memory
Job FailedNot enough memory to finish printing. 
Change printing resolution to 600 x 600 dpi if 
you selected higher resolution. 
or 
Install additional memory in the printer.
Output Tray
FullRemove media from Output tray.
Page
Too complexNot enough memory to finish printing. 
Change printing resolution to 600 x 600 dpi if 
you selected higher resolution. 
or 
Install additional memory in the printer.
Paper Feeder
Not installedInstall paper feeder.
Parallel I/O 
Buffer OverflowNot enough memory to finish printing. 
PJL Operations 
FailedError in PJL code. Resend print job to the 
printer.
MessageCorrective Action/Additional Information 
						

							253 Care and Maintenance
Press Enter to
Initialize DiskPress the ENTER button to initialize a new 
hard disk. This message will also appear if 
the hard disk has malfunctioned, or if the 
hard disk is the incorrect type. If this error 
appears after cycling power to the printer, 
contact an authorized service 
representative.
Printing 
ConfigurationPrinter is printing the Configuration page.
Printing 
Font ListPrinter is printing the Font List page.
Printing 
Test PagePrinter is printing the Test Page.
ProcessingPrinter is receiving or processing a print job.
PS Memory FullNot enough memory to finish printing. 
Change printing resolution to 600 x 600 dpi if 
you selected higher resolution. 
or 
Install additional memory in the printer.
PS Memory Full
Stored Data LostNot enough memory to finish printing. 
Change printing resolution to 600 x 600 dpi if 
you selected higher resolution. 
or 
Install additional memory in the printer.
RAM Test Failure
Cycle PowerCycle Power. If printer does not function 
normally, call for service.
Scan Buffer Error
Cycle PowerCycle Power. If printer does not function 
normally, call for service.
Service (%s) 
Cycle PowerFirmware error. Contact an authorized 
service representative.
TEST FAILED
UP/DOWN CANCELInitial hardware test failed.
Call for service.
Transfer
wearing outTransfer unit will need to be replaced soon.
Transparency Tray
Not installedInstall transparency tray.
Upper Left side door
OpenClose Left side door.
MessageCorrective Action/Additional Information 
						

							254 Care and Maintenance
Some operation errors cause the ERROR indicator to blink and printing to 
stop. A message will be displayed on the LCD panel until the problem is 
fixed. If the LCD panel message includes the instruction, Call for Service, 
contact an authorized service representative.
In addition, if the following conditions occur, turn off and unplug the printer 
and scanner from the outlet and contact a qualified service representative:
•The power cord or plug is damaged or frayed.
•Liquid has been spilled into the printer.
•The printer and scanner have been exposed to rain or water.
•The printer and scanner do not operate normally though the operating 
instructions are being followed. Adjust only those controls that are 
described in the operating instructions; improper adjustment of other 
controls may result in damage and will often require extensive work to 
restore the printer and scanner to normal operation. Upper Tray
EmptyAdd media to Upper tray.
Upper Tray
Not installedInstall Upper tray.
Warming UpPrinter is warming up.
Yellow Toner
EmptyReplace yellow toner.
Yellow Toner Cartridge 
Not installedInstall yellow toner cartridge.
MessageCorrective Action/Additional Information
LCD panel 
service calls 
						

							255
Status display program for Windows
NOTE: 
						

							256 Care and Maintenance
eThis box shows an error or status message and the corresponding icon.
fThis box lists the mode your scanner is in, device name (scanner), the 
built-in memory size of the printer, and the name of the scan job.
gThis button minimizes the Panasonic Scanner Display window. Pressing 
the (Esc) key on the keyboard can also minimize it.
hThis button displays the Status Display Setup window, where you can 
change different settings. 
iThis button displays the version of the Status Display.
jThis button resumes scanning after recovering from an error situation.
kThis button cancels the scan job which caused an error.
Scanner Status 
window
67 9no
34 5 8 r1
2pq 
						

							257 Care and Maintenance
lThis button displays the Panasonic Show configuration window.
mThis button displays the previous recovery message.
nThis button displays the initial recovery message.
oThis button displays the next recovery message.
pThis box displays a recovery procedure along with a picture.
qThis button provides you additional help.
rThis button changes the Panasonic Scanner Status window to the 
Panasonic Printer Status window, and is displayed only when using the 
Digital Duplicator Utility. 
						

							258 Care and Maintenance
eThis box shows an error or status message and the corresponding icon.
fThis box lists the mode your printer is in, device name (printer), tray 
being used, the built-in memory size of the printer and the name of the 
print job.
gThis button minimizes the Panasonic Printer Status window. Pressing 
the (Esc) key on the keyboard can also minimize it.
hThis button displays the Setup for Status Display window, where you 
can change different settings.
iThis button displays the version of the Status Display.
jThis button resumes printing after recovering from an error situation.
Printer Status 
window
67 9no
8r 1
2pq
34 5 
						

							259 Care and Maintenance
kThis button cancels the print job which caused an error.
lThis button displays the Panasonic Show Configuration window.
mThis button displays the previous recovery message.
nThis button displays the initial recovery message.
oThis button displays the next recovery message.
pThis box displays a recovery procedure along with a picture.
qThis button provides you additional help.
rThis button changes the Panasonic Printer Status window to the 
Panasonic Scanner Status window, and is displayed only when using 
the Digital Duplicator Utility. 
						

							260 Care and Maintenance
Repacking
It is highly recommended that you keep the original carton and ALL packing 
materials. Should you need to transport or ship your unit, please follow 
these instructions.
SAFETY CAUTIONS:
•The printer weighs about 49.5 kg {108.9 lbs.}. It must be handled by two 
people.
•The scanner weighs about 22.5 kg {49.5 lbs.}. It must be handled by two 
people.
NOTES:
•Should you need to send your KX-PS8100 for service, consult your 
reseller first or Panasonic.
•Please use the original carton and all of the original packing materials.
•If you do not have the packing for the color imaging unit and the transfer 
unit: contact Panasonic for packaging.
•Improper repacking of the KX-PS8100 may result in a service charge to 
remove spilled toner.
•Since the printer uses dry toner, extreme care must be taken when 
handling. The printer should be handled in the upright (vertical) position.
Material required:
•Original cartons and packing materials
•Newspaper or drop cloth
•Shipping tape and scissors