Panasonic Kx Ps8100 Operating Instructions Manual
Have a look at the manual Panasonic Kx Ps8100 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 96
96 Installing Software for Windows
When the printer driver is installed, specify the optional devices installed on
your printer to enable use of options relating to those devices.
To specify devices installed on the printer:
1Click [Start], select Settings, and click Printers.
2Click the Panasonic KX-PS8100 printer icon and select
Properties from the File menu.
3Click the Device Options tab, click the Options tab,
and then specify the devices installed on the printer.
2nd Feeder—Select if an optional...](http://img.usermanuals.tech/thumb/58/67729/w64_kx-ps8100_en_om_d-95.png "Page 96
96 Installing Software for Windows
When the printer driver is installed, specify the optional devices installed on
your printer to enable use of options relating to those devices.
To specify devices installed on the printer:
1Click [Start], select Settings, and click Printers.
2Click the Panasonic KX-PS8100 printer icon and select
Properties from the File menu.
3Click the Device Options tab, click the Options tab,
and then specify the devices installed on the printer.
2nd Feeder—Select if an optional...")
![Page 97
97 Installing Software for Windows
To print from Windows 95 you need to:
•Set up the printer to accept print jobs from your computer.
•Configure a port on each Windows 95 computer for the network or
connection type.
n Setting up parallel printing with Windows 95
The following procedure describes how to prepare the computer for parallel
printing.
To install the printer for parallel printing:
1Click [Start], select Settings, and click Printers.
2Click the Panasonic KX-PS8100 printer icon and select...](http://img.usermanuals.tech/thumb/58/67729/w64_kx-ps8100_en_om_d-96.png "Page 97
97 Installing Software for Windows
To print from Windows 95 you need to:
•Set up the printer to accept print jobs from your computer.
•Configure a port on each Windows 95 computer for the network or
connection type.
n Setting up parallel printing with Windows 95
The following procedure describes how to prepare the computer for parallel
printing.
To install the printer for parallel printing:
1Click [Start], select Settings, and click Printers.
2Click the Panasonic KX-PS8100 printer icon and select...")
![Page 98
98 Installing Software for Windows
n Setting up IPX (Novell) printing with Windows 95
The following procedure describes how to prepare the computer for printing
using IPX protocols.
Before you begin:
Verify the printer has been configured for Novell printing in
Network Protocol Setup.
For more information about setting up the printer for IPX (Novell) printing,
see “Setting up IPX (Novell) printing” on page 82.
To set up IPX (Novell) printing:
1Click [Start], select Settings, and click Control Panel....](http://img.usermanuals.tech/thumb/58/67729/w64_kx-ps8100_en_om_d-97.png "Page 98
98 Installing Software for Windows
n Setting up IPX (Novell) printing with Windows 95
The following procedure describes how to prepare the computer for printing
using IPX protocols.
Before you begin:
Verify the printer has been configured for Novell printing in
Network Protocol Setup.
For more information about setting up the printer for IPX (Novell) printing,
see “Setting up IPX (Novell) printing” on page 82.
To set up IPX (Novell) printing:
1Click [Start], select Settings, and click Control Panel....")
![Page 99
99 Installing Software for Windows
10In the Add Port window, verify that the network path is
updated, and click [OK].
To confirm the connection, you can print a Windows 95 test page.
11Click the General tab in the Properties window, and
click [Print\Test\Page].
You are ready to print to the printer from Windows applications.
When you select Print, jobs are routed to the print queue on the
NetWare file server, and then sent to the printer.
NOTE:
•If the test page is not printed, perform the following...](http://img.usermanuals.tech/thumb/58/67729/w64_kx-ps8100_en_om_d-98.png "Page 99
99 Installing Software for Windows
10In the Add Port window, verify that the network path is
updated, and click [OK].
To confirm the connection, you can print a Windows 95 test page.
11Click the General tab in the Properties window, and
click [Print\Test\Page].
You are ready to print to the printer from Windows applications.
When you select Print, jobs are routed to the print queue on the
NetWare file server, and then sent to the printer.
NOTE:
•If the test page is not printed, perform the following...")
![Page 100
100 Installing Software for Windows
To install the scanner driver and utilities:
1
Start Windows and quit all applications.
2
Click
[Start]
, select
Settings
, and click
Control Panel
.
The Control Panel window is displayed.
3
Double-click the
Add/Remove Programs
icon.
The Add/Remove Program Properties window is displayed.
4
Click
[Install...]
.
The Install Program From Floppy Disk or CD-ROM window is
displayed.
5
Insert the
KX-PS8100 CD-ROM Disc2
in your...](http://img.usermanuals.tech/thumb/58/67729/w64_kx-ps8100_en_om_d-99.png "Page 100
100 Installing Software for Windows
To install the scanner driver and utilities:
1
Start Windows and quit all applications.
2
Click
[Start]
, select
Settings
, and click
Control Panel
.
The Control Panel window is displayed.
3
Double-click the
Add/Remove Programs
icon.
The Add/Remove Program Properties window is displayed.
4
Click
[Install...]
.
The Install Program From Floppy Disk or CD-ROM window is
displayed.
5
Insert the
KX-PS8100 CD-ROM Disc2
in your...")
![Page 102
102 Installing Software for Windows
n
Using Plug and Play
1
Turn on the printer, then the scanner.
2
When the “
Ready
” is displayed on the printer’s LCD, turn
on the computer and start Windows 95.
The New Hardware Found window is displayed for a few seconds,
then the Update Device Driver Wizard window is displayed.
3
Insert the
KX-PS8100 CD-ROM Disc2
in your CD-ROM
drive.
4
Click
[NextÌ]
.
5
Click
[Other\Locations...]
.
The Select Other Location window is displayed.
6...](http://img.usermanuals.tech/thumb/58/67729/w64_kx-ps8100_en_om_d-101.png "Page 102
102 Installing Software for Windows
n
Using Plug and Play
1
Turn on the printer, then the scanner.
2
When the “
Ready
” is displayed on the printer’s LCD, turn
on the computer and start Windows 95.
The New Hardware Found window is displayed for a few seconds,
then the Update Device Driver Wizard window is displayed.
3
Insert the
KX-PS8100 CD-ROM Disc2
in your CD-ROM
drive.
4
Click
[NextÌ]
.
5
Click
[Other\Locations...]
.
The Select Other Location window is displayed.
6...")
![Page 105
105 Installing Software for Windows
To install the scanner driver and utilities:
If “Unknown Device” is displayed, the scanner driver or the utilities can be
installed.
The following procedure shows the case when the scanner driver is
detected first.
1Click [NextÌ].
2Click [NextÌ].
3Insert the KX-PS8100 CD-ROM Disc2 in your CD-ROM
drive.
4Click on ( ) the Specify a location check box and click
off the other item’s check box.4](http://img.usermanuals.tech/thumb/58/67729/w64_kx-ps8100_en_om_d-104.png "Page 105
105 Installing Software for Windows
To install the scanner driver and utilities:
If “Unknown Device” is displayed, the scanner driver or the utilities can be
installed.
The following procedure shows the case when the scanner driver is
detected first.
1Click [NextÌ].
2Click [NextÌ].
3Insert the KX-PS8100 CD-ROM Disc2 in your CD-ROM
drive.
4Click on ( ) the Specify a location check box and click
off the other item’s check box.4")
![Page 106
106 Installing Software for Windows
5Type “X*:\DRIVERS\ENGLISH\WIN98\SCANNER”.
* CD-ROM drive name differs depending on your computer.
6Click [NextÌ].
7aIf the scanner driver is not found, the following window is
displayed.
Click [ËBack], then go to step 12 to install the utilities.](http://img.usermanuals.tech/thumb/58/67729/w64_kx-ps8100_en_om_d-105.png "Page 106
106 Installing Software for Windows
5Type “X*:\DRIVERS\ENGLISH\WIN98\SCANNER”.
* CD-ROM drive name differs depending on your computer.
6Click [NextÌ].
7aIf the scanner driver is not found, the following window is
displayed.
Click [ËBack], then go to step 12 to install the utilities.")
101 Installing Software for Windows 10 In the Setup Type window, select the Typical , Compact , or Custom installation option. NOTE: • If you want to install the Print Count Manager program, select the Custom installation option and click on ( ) the Print Count Manager check box in the Select Components window. 11 Follow the instructions on the screen. A message appears on the screen to indicate installation is complete. 12 After installation, restart your system. Choose this To install Typical /CompactThe Scanner Driver and Status Display. Also copies the Digital Duplicator Utility Custom Only the files you select (Print Count Manager) — copies them to your hard disk. 4
102 Installing Software for Windows n Using Plug and Play 1 Turn on the printer, then the scanner. 2 When the “ Ready ” is displayed on the printer’s LCD, turn on the computer and start Windows 95. The New Hardware Found window is displayed for a few seconds, then the Update Device Driver Wizard window is displayed. 3 Insert the KX-PS8100 CD-ROM Disc2 in your CD-ROM drive. 4 Click [NextÌ] . 5 Click [Other\Locations...] . The Select Other Location window is displayed. 6 Type “X*:\WIN32\DISK1”. * CD-ROM drive name differs depending on your computer. 7 Click [OK] . The Update Device Driver Wizard window is displayed. 8 Click [Finish] . The Choose Setup Language window is displayed. 9 Select the language, and click [OK] . Wait until the Welcome window is displayed. 10 Follow the instructions on the screen to complete the installation. After installation, restart your system. NOTE: • The Plug and Play installation procedure varies depending on the version of Windows 95. Refer to Help in Windows 95.
103 Installing Software for Windows Installing the software to Windows 98 The following files will be installed by using Plug and Play. •Scanner driver •PostScript printer driver •Utilities When a Typical installation is performed using the installer, following files are automatically installed. •Digital Duplicator Utility •Status Display You can also select following additional file to install during a Custom installation procedure. •Print Count Manager NOTE: •When reinstalling the KX-PS8100 software, do it immediately after restarting Windows. To install the bundled software (CorelDRAW Select Edition), see “Installing the bundled software” on page 133. Installing the scanner driver, utilities and PostScript printer driver
104 Installing Software for Windows NOTES: •Before installing the software to Windows 98, make sure that the provided/not provided SCSI cable and parallel interface cable are connected properly between KX-PS8100 and your computer. For connecting the SCSI cable, refer to step 1 to 6 (page 60 to 62). For connecting the parallel interface cable, refer to step 1 to 3 (page 64). •The order of installing each device depends on what is detected first. 1Turn on the printer, then the scanner. 2When the “Ready” is displayed on the printer’s LCD, turn on the computer and start Windows 98. • If “Unknown Device” is displayed, go to “To install the scanner driver and utilities” (page 105). •If “Panasonic KX-PS8100” is displayed, go to “To install the PostScript printer driver” (page 110).
105 Installing Software for Windows To install the scanner driver and utilities: If “Unknown Device” is displayed, the scanner driver or the utilities can be installed. The following procedure shows the case when the scanner driver is detected first. 1Click [NextÌ]. 2Click [NextÌ]. 3Insert the KX-PS8100 CD-ROM Disc2 in your CD-ROM drive. 4Click on ( ) the Specify a location check box and click off the other item’s check box.4
106 Installing Software for Windows 5Type “X*:\DRIVERS\ENGLISH\WIN98\SCANNER”. * CD-ROM drive name differs depending on your computer. 6Click [NextÌ]. 7aIf the scanner driver is not found, the following window is displayed. Click [ËBack], then go to step 12 to install the utilities.
107 Installing Software for Windows 7bIf the scanner driver is found, the following window is displayed. Go to next step to install the scanner driver. 8Click [NextÌ]. 9Click [OK].
108 Installing Software for Windows 10Insert Windows 98 CD-ROM, select the specific directory (win98), then click [OK]. 11Click [Finish]. • If the utilities are not installed, click [NextÌ] twice after clicking [Finish]. Go to step 12. •If the scanner driver and utilities are installed and the PostScript printer driver is not installed, go to “To install the PostScript printer driver” (page 110). 12Type “X*:\WIN32\DISK1”. * CD-ROM drive name differs depending on your computer.
109 Installing Software for Windows 13Click [NextÌ]. 14Click [NextÌ]. The installer starts. Follow the instructions on the screen. After copying the utility files, the “Add New Hardware Wizard” window is displayed. 15Click [Finish]. • If the scanner driver is not installed, go to step 1 to 11 (page 105 to 108). •If the scanner driver and utilities are installed and the PostScript printer driver is not installed, go to “To install the PostScript printer driver” (page 110).
110 Installing Software for Windows To install the PostScript printer driver: 1Click [NextÌ]. 2Click [NextÌ]. 3Insert the KX-PS8100 CD-ROM Disc1 in your CD-ROM drive. 4Click on ( ) the Specify a location check box, and click off the other item’s check box.4