Panasonic Kx Ps8100 Operating Instructions Manual
Have a look at the manual Panasonic Kx Ps8100 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
221 Care and Maintenance To clear media jams in location A: 1Open the left side door corresponding to the selected media tray and remove the jammed media. 2Close the left side door. OR 1Remove the media tray. 2Remove the jammed media from inside the printer. 3Reinsert the media tray. 4Open and close the printer’s front door to clear the error message from the printer LCD panel.
222 Care and Maintenance To clear media jams in location A with 2nd cassette feeder: 1Open the lower left side door. 2Remove the jammed media. 3Close the lower left side door. OR 1Remove the selected media tray (middle or lower media tray).
223 Care and Maintenance 2Remove the jammed media from inside the printer. 3Reinsert the media tray. 4Open and close the printer’s front door to clear the error message from the printer LCD panel. To clear media jams in location B with multi-purpose tray: 1Remove the jammed media from the multi-purpose tray. 2Open and close the printer’s front door to clear the error message from the printer LCD panel. NOTE: •A few sheets of paper printed after cleaning media jam may be dirty.
224 Care and Maintenance To clear media jams in location B with media tray: 1Open the left side door. 2Use the green handles to pull out the paper feeder. 3Remove the jammed media on or under the paper feeder. 4Reinsert the paper feeder and close the left side door.
225 Care and Maintenance To clear media jams in location C: 1Open the printer’s front door. . SAFETY CAUTION: •The fuser is hot; to avoid personal injury, turn off the printer and wait 10 minutes (after opening the printer’s front door) for the fuser to cool before touching it. 2Check whether the media is jammed under the color imaging unit. • If the media is jammed, remove it by following the steps 1 to 4 in “To clear media jams in location B with media tray” on page 224 and then go to the next step. • If it isn’t, go to the next step. 3 Turn the small green thumbscrew counterclockwise to unlock the fuser. . Jammed media
226 Care and Maintenance 4 a)
Holding the green tab on the right, slide the fuser out
until it stops.
b)
Press the green lever on the left to release the safety
catch. 5 a)
Hold the fuser as shown below, and slide it out of the
printer.
b)
Close the printer’s front door.
SAFETY CAUTIONS:
•
The fuser unit weighs approximately 3.1 k
g
{6.8 lbs.}. Take care
when handling it.
•
Do not touch the roller and the parts around the roller when
handling the fuser, because they may be hot.
.
a b
CAUTION:
HOT SURFACE INSIDE
b
a
Roller
227 Care and Maintenance 6 Remove the oil supply roll. a) Press out on tabs to unlock the oil supply roll. b) Remove the oil supply roll out of the fuser. NOTE: • If the paper is not jammed in the fuser unit, perform the following. Repeat steps 1 to 4 in “To clear media jams in location B with media tray” on page 224. 7 Remove the cleaning pad, holding the tabs. b a a The shape of a cleaning pad is subject to change. Cleaning pad
228 Care and Maintenance 8 a) Turn the fuser’s large green knob clockwise. b) Remove the jammed media. OR Remove the jammed media. 9 Replace the cleaning pad. a b
229 Care and Maintenance 10 a) Replace the oil supply roll into the fuser. b) Press down firmly on the oil supply roll to snap both sides into place. NOTE: • If the oiled cloth is loose, rotate the gear (A) clockwise until it is tight. Do not touch the oiled cloth. CAUTION:CAUTION: • If the oil supply roll is not installed correctly, print quality will be diminished. a b b A Oiled cloth
230 Care and Maintenance 11 a) Open the printer’s front door. b) Slide the fuser back into the printer. 12 a) Turn the small green thumbscrew clockwise to lock the fuser. b) Close the printer’s front door. b a a b