Panasonic Digital Imaging Systems DP-2310/3010/3510/4510/6010 Operating Instructions

							Password Communications
81
Facsimile
Features
To set receiving password and parameter,
Setting Password Reception
1
 
2 
* Certain Parameter Numbers may differ between the DP-2310/3010 and DP-
3510/4510/6010 series. If you encounter two Parameter Numbers separated
by a / and an asterisk (*), the first number corresponds to (DP-2310/3010)
and the second number corresponds to (DP-3510/4510/6010).
3
Input identification code and press  .
4
Press     or   to scroll the display to the desired Fax 
Parameter.
(See page 192)
Ex:
or
Press   and enter the Fax Parameter number directly from 
the keypad and press   or   key.
Function Mode
Select A Function
GENERAL SETTINGS
FAX/EMAIL SETTINGSCOPIER SETTINGS
PRINTER SETTINGS
SCANNER SETTINGS
FAX/EMAIL SETTINGS 09/04*  Key Operator Mode
Function Mode
Input Identification Code
OK
User Parameters Function Mode: FAX/EMAIL
Select An Item
Fax Parameters
01 Fax Parameters
044 Password-Receive
01 Fax Parameters
SETSTART
Fax Parameters
Input Number:Press OK.
Password-Receive
_ 
						

							Password Communications
82
Setting Password Reception
NOTE1. Once you set the parameter, you cannot select the parameter, “OFF” or “ON”, for each
reception.  It is always “OFF” or “ON” until you change the setting.
2. To change the password, press   in step 4. Then re-enter a new one.
5
Enter a 4-digit Receiving Password and press  .
Ex: and press 
6 (password is not checked) 
or
 (password is checked)
7
 
OK
1234OK
OffFax Parameters
Select And Press OK
Password-Receive
On
Off
On
OK
CLEAR 
						

							Password Communications
83
Facsimile
Features
To use Password Transmission, you can select PASSWORD-XMT “OFF” or “ON” for each Transmission by
following the procedure below.
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL mode.
Using Password Transmission
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the Platen Glass.
2 
3
4
 (password is not checked) 
or
 (password is checked)
MODE SETTINGSELECT MODE
Select Mode
Select A Function
PASSWORD-XMT
COVER SHEET
LEDGER EMAIL XMTCOMM. JOURNAL
RECEIVE TO MEMORY
DELIVERY NOTICE
PASSWORD-XMT
Password-Transmit
Select A Function
OFF
ON 
						

							Password Communications
84
Using Password Transmission
Using Password Reception
There is no additional operation required once you set the parameter by following the procedure on page
81.  The parameter, “OFF” or “ON”, cannot be selected for each reception.  It is always “OFF” or “ON” until
you change the setting.
5
6
Dial by any combination of the following methods:
• Manual Number Dialing, press   after each station is entered (up to 70
stations) 
• Address Book Dialing
(up to 200 stations)
(For details, see page 24.)
Ex:
7
If your machines Transmission Password coincides with the other stations
Transmission Password, your machine starts sending the document.
When transmission is completed, PASSWORD-XMT returns to standard
setting (“OFF” or “ON”).
OKMMM-dd-yyyy  15:00     0%
Ready To Fax
Original Set
AFRICA
ASIA AMERICA
ANTARTICA
APOLLO
BERLIN
BRAZIL
OK
PANASONIC 
						

							85
Facsimile
Features
Receive To Memory
This feature is used to secure all received documents by storing them into memory.  To print the
document(s) received in memory, the authorized operator must enter the correct password.
Setting the RCV To Memory Password
1
 
2 
* Certain Parameter Numbers may differ between the DP-2310/3010 and DP-
3510/4510/6010 series. If you encounter two Parameter Numbers separated
by a / and an asterisk (*), the first number corresponds to (DP-2310/3010)
and the second number corresponds to (DP-3510/4510/6010).
3
Input identification code and press  .
4
Press     or   to scroll the display to the desired Fax 
Parameter.
or
Press   and enter the Fax Parameter number directly from 
the keypad and press   or   key.
Function Mode
Select A Function
GENERAL SETTINGS
FAX/EMAIL SETTINGSCOPIER SETTINGS
PRINTER SETTINGS
SCANNER SETTINGS
FAX/EMAIL SETTINGS 09/04*  Key Operator Mode
Function Mode
Input Identification Code
OK
00  User ParametersFunction Mode: FAX/EMAIL
Select An Item
01  Fax Parameters
02
03
04
01 Fax Parameters
037 Receive To Memory
01 Fax Parameters
SETSTART
Fax Parameters
Input Number; Press OK
Receive To Memory
_ 
						

							Receive To Memory
86
Setting the RCV To Memory Password
5
Enter a 4-digit RCV to Memory Password and then press  .
Ex: and press 
6
 
OK
1234OK
OK 
						

							Receive To Memory
87
Facsimile
Features
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL mode.
NOTE1. When the memory overflows, the machine will stop receiving and release the line.  The
machine will not answer the next incoming call until there is space available in memory.
2. We recommend that optional flash memory card is installed when this function is used.  See
page 219 on Image Memory Capacity.
Setting RCV To Memory
1
2
 
3
4
MODE SETTING
BASIC MENUPRINT OUT
STDFINE
TEXT/PHOTO
MEMORY XMTADDRESS BOOK
S-FINE 600dpi
LIGHTER DARKER
TEXT PHOTODIRECT
GET EMAILX-STAMP
COMM.STATUS
MEMORY
LETTER
DEFERRED
COMM.POLLING/
ADV.COMM.SELECT
MODEEDIT FILE
MODE
COMPLETION
NOTICE2-SIDED
ORIGINAL
MMM-dd-yyyy  15:00     0%
Ready To Fax
SELECT MODE RECEIVE TO MEMORY
Receive To Memory
Select A Function
ONReceive To Memory
Select A Function
OKMMM-dd-yyyy  15:00      0%
Ready To Fax
Receive To Memory
AFRICA
ASIA AMERICA
ANTARTICA
APOLLO
BERLIN
BRAZIL 
						

							Receive To Memory
88
After receiving documents with the Receive To Memory feature, the following message will appear on the
display.
To print the document(s), follow the steps below. 
Make sure that the FAX/EMAIL lamp is ON.  If not, press   to select the FAX/EMAIL mode.
Printing Documents
1
2
 
3
4
MMM-dd-yyyy  15:00     05%
Ready To Fax
Message In Memory
AFRICA
ASIA AMERICA
ANTARTICA
APOLLO
BERLIN
BRAZIL
MODE SETTING
BASIC MENUPRINT OUT
STDFINE
TEXT/PHOTO
MEMORY XMTADDRESS BOOK
S-FINE 600dpi
LIGHTER DARKER
TEXT PHOTODIRECT
GET EMAILX-STAMP
COMM.STATUS
MEMORY
LEDGER
DEFERRED
COMM.POLLING/
ADV.COMM.SELECT
MODEEDIT FILE
MODE
COMPLETION
NOTICE2-SIDED
ORIGINAL
MMM-dd-yyyy  15:00     5%
Ready To Fax
Message In Memory
       
SELECT MODE RECEIVE TO MEMORY
Receive To Memory
Select A Function
PRINTReceive To Memory
Select A Function
OK 
						

							Receive To Memory
89
Printing Documents
Facsimile
Features
NOTE1. If the password has not been set, your machine will not prompt you to enter the password.
The document(s) will be printed immediately after pressing   in Step 4.
2. Once the RCV TO MEMORY feature is set to ON,  the password cannot be changed (Fax
Parameter No. 037 will not be selectable on the LCD display).  If you wish to change the
password, set the RCV TO MEMORY feature to OFF first.  Then change the password. (See
page 87)
5
Enter the password to print the document(s) and then press  .
(See note 1)
Ex: and press 
6
Machine will start to print the document(s).
OK
1234OK
OK 
						

							90
PIN Code Access
If your PBX requires a PIN (Personal Identification Number) code to get an outside line, your machine can
be set to prompt the user to enter a PIN code before any dialing.
Selecting the Access Method (Prefix or Suffix)
1
 
2 
* Certain Parameter Numbers may differ between the DP-2310/3010 and DP-
3510/4510/6010 series. If you encounter two Parameter Numbers separated
by a / and an asterisk (*), the first number corresponds to (DP-2310/3010)
and the second number corresponds to (DP-3510/4510/6010).
3
Input identification code and press  .
4
Press     or   to scroll the display to the desired Fax 
Parameter.
or
Press   and enter the Fax Parameter number directly from 
the keypad and press   or   key.
Function Mode
Select A Function
GENERAL SETTINGS
FAX/EMAIL SETTINGSCOPIER SETTINGS
PRINTER SETTINGS
SCANNER SETTINGS
FAX/EMAIL SETTINGS 09/04*  Key Operator Mode
Function Mode
Input Identification Code
OK
00  User ParametersFunction Mode: FAX/EMAIL
Select An Item
01  Fax Parameters
02
03
04
01 Fax Parameters
039 PIN Code Access
01 Fax Parameters
SETSTART
NoneFax Parameters
Select And Press OK
PIN Code Access
Suffix
Prefix