Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

							9-6  Enabling/Disabling Auditron229
Using the Auditron Feature
9
This section explains the procedures for Enabling/Disabling the Auditron
Mode.  If Auditron Mode is set to On in Auditron Setup, then the Auditron
Mode is enabled.  In this case, the Password Entry screen will appear when
the machine is switched On.
Procedure
Press Settings/Meter Check.
Select Auditron Admin. Mode.
Enter the Access Number of the Auditron Administrator and
select Confirm.
Each input digit is represented by an asterisk.
Enabling/Disabling Auditron
The factory default is Off.
The screen on the right has the
Auditron Mode enabled.
If you made a mistake while entering
the Access Number, press the Clear
C button to clear and re-enter.
9-8: Changing the Auditron Access
Number
 for information on how to
change the Access Number. 
						

							9-6  Enabling/Disabling Auditron230
Using the Auditron Feature
9
Select Auditron Setup.
Select On or Off.
Select Close.
Select Exit Auditron.
The default screen is displayed if you have selected Off.
Review CE Data is used only by
Panasonic Service Representative. 
						

							9-7  Defining Automatic Display of the Password Entry Screen231
Using the Auditron Feature
9
This section explains the procedures for defining the time required for the
machine to return to the Password Entry screen after a copy job is
completed.
Procedure
Press Settings/Meter Check.
Press Settings/Meter Check.
Enter the Access Number of the Auditron Administrator and
select Confirm.
Each input digit is represented by an asterisk.
Defining Automatic Display of
the Password Entry Screen
The factory default is 2 minutes.
The screen on the right has the
Auditron Mode enabled.
If you made a mistake while entering
the Access Number, press the Clear
C button to clear and re-enter.
9-8: Changing the Auditron Access
Number
 for information on how to
change the Access Number. 
						

							9-7  Defining Automatic Display of the Password Entry Screen232
Using the Auditron Feature
9
Select Auditron Setup.
Select Set Timer for Password Entry Screen Timer.
Specify a time between 1-59 seconds or 1-10 minutes in 1
second/minute increments by using the         buttons.
Select Save, and then Close.
Select Exit Auditron.
The Password Entry screen is displayed.
Select Disable if you want to disable
the Password Entry screen feature.
When the time displayed exceeds
59 seconds, it will be changed to
minute.  
Review CE Data is used only by
Panasonic Service Representative.
The default screen is displayed if
Auditron Mode is not enabled. 
						

							9-8  Changing the Auditron Access Number233
Using the Auditron Feature
9
You can define the Access Number by using 4 to 12 digits.
Procedure
Select Auditron Admin. Mode.
 Select Auditron Admin. Mode.
 Enter Access Number of the Auditron Administrator and select
Confirm.
Changing the Auditron Access
Number
The screen on the right has the
Auditron Mode enabled.
The factory default is Ò11111Ó.
If you made a mistake while entering
the Access Number, press the Clear
C button to clear and re-enter. 
						

							9-8  Changing the Auditron Access Number234
Using the Auditron Feature
9
Review CE Data is used only by
Panasonic Service Representative.
Select Change of Access No.
Enter the New Access Number and select Enter.
Enter the same number again for confirmation and select
Enter.
Select Close.
Select Exit  Auditron.
The Password Entry screen is displayed.
To change the Access Number
setting, select Reset or the Clear C
button.
Define the Access Number within
the range of 4 to 12 digits.
The default screen is displayed if
Auditron Mode is not enabled. 
						

							A Specifications .............................................................. 236
B Possible Combinations of Features ............................ 239
C Stapling ....................................................................... 243
D Options and Supplies .................................................. 245
Appendix 
						

							A  Specifications236
Appendix
A
Standard Specifications
Copier Type Console
Platen Type Fixed
Photosensitive Type Organic photosensitive conductor (OPC)
Copying Method Indirect electrostatic
Development Method Dry development
Fusing System Heat roller
Scanning Method 3-dimensional scanning by CCD image sensors
(for copying) Scanner : 400 dots/25.4 mm (400 dpi)
Recorder: 600 dots/25.4 mm (600 dpi)
Warm-up Time 120 V Model: 3 minutes or less (68¡F/20¡C 60% density)
220 V-240 V Model: 3 minutes or less (68¡F/20¡C 60% density)
Power 120 V, 12 A or less (60 Hz); 220-240 V, 10 A or less (50/60 Hz)
Max. Power Consumption 120 V model: 1.4 kW
(with all optional features 220-240V model: 1.43 kW
installed)
Dimensions (W) 620 x (D) 778 x (H) 1080 mm or (W) 24.4 x (D) 30.6 x (H) 42.5
Weight Main unit : 407 lbs (185 kg)
Installation Environment Temperature: 50 to 95¡F/10 to 35¡C
Humidity: 15 to 85% (no condensation)
At 95¡F/35¡C, humidity should be below 47.5%. At 82¡F/27.8¡C, humidity should be below 85%.
Document Size On Document Glass Max. Both sheets and bound documents: 297 x 420 mm
Min. No limit.
In DADF Max. 297 x 420 mm or 11x17 (279.4 x 431.8 mm)
Min. 148 x 210 mm or 5.5 x 8.5
DADF Specifications Feed : Automatic feeding from stack
Capacity : 50 sheets
Paper Weight : 1 sided, 38-128 g/m
2 or 10.1 - 34.1 lbs
2 sided, 50-105 g/m
2 or 13.3 - 28.0 lbs   For B5/Invoice only, 17.0 - 28.0 lbs
Specifications
The following are the specifications for the DP-6000/7000 series. We regret
that improvements in specifications/appearance of the product may be made
without prior notice. 
						

							A  Specifications237
Appendix
A
Copy Paper Size Tray 1
A5, A5, 5.5Ó x 8.5, B5, A4, 8.5 x 11
Tray 2 to 4
A5, A5
, 5.5 x 8.5, B5, B5, A4, A4, 8.5 x 11, 8.5 x 11, 8.5 x 13,
8.5 x 14, B4, 8K (267 x 388 mm), A3, 11 x 17
Tray 5 (Bypass)
A6, B6, A5, A5
, B5, B5, A4,  A4, B4, 8K (267 x 388 mm), A3,
5.5 x 8.5, 8.5 x 11, 8.5 x 11
, 8.5 x 13, 8.5 x 14, 11 x 17
Non standard size (Y: 100-300 mm or 3.8-11.8)
    *Area which can be copied is up to 297 mm or 11.7
                              (X: 148-432 mm or 5.8-17 )
Image Loss Edge Erase Lead edge up to 4mm (0.2), trail edge up to 4mm (0.2),
both up to 4mm (0.2),
Copy All Lead edge up to 4mm (0.2), trail edge up to 4mm (0.2),
both up to 4mm (0.2),
Output Tray Capacity 500 sheets
First Copy Output Time 2.7 sec (Document is on Document Glass and paper is A4 or 8.5 x 11
 from Tray 1)
2.8 sec (for models with printer functions)
Continuous Copy Speed DP-6000    60 copies per minute ( A4 or 8.5 x 11size)
(1 Sided/Size-for-Size) DP-7000    70 copies per minute ( A4 or 8.5 x 11size)
Magnification Size-for-size: 1:1 ± 0.8%
Fixed % : For USA & Canada
1:0.500, 1:0.647, 1:0.786, 1:1, 1:1.294, 1:1.545, 1:200, 1:400
Variable% : 1:0.25 to 1:4.00 (in 1% increments)
Paper Supply Tray : 1000 sheets
Trays 2 to 4 : 550 sheets each
Tray 5 (Bypass) : 50 sheets
Max. Continuous Copy Vol. 999 sheets
Density Adjustment 7  levels
First Copy Output Time refers to time taken for the first copy of a job to be
output.
To maximize image quality, the unit may pause temporarily to optimize the
imaging process. 
						

							A  Specifications238
Appendix
A
   Finisher (optional)
Power From main body of machine
Power Consumption 120 V model: 72 W
220-240 V model: 79 W
Size (W) 700 x (D) 650 x (H) 1100 mm or (W) 27.6 x (D) 25.6 x (H) 43.3
Dimensions Main body + Tray 5 (Bypass) + Finisher: (W) 1599 x (D) 778 mm or (W) 63.0 x (D) 30.6
Weight 55 kg or 121 lbs
Capacity Tray 1 (top tray): 500 sheets (20 lbs or 80g/m
2)
Tray 2: 1500 sheets each (750 sheets each when paper is larger than A4.) (20 lbs or 80g/m2)
Paper Size (Stapled/Stacked)A6*, B6*, A5*, A5, 5.5 x 8.5*, B5, B5, A4, A4, B4, A3,
8.5 x 11, 8.5 x 11
, 8.5 x 13, 8.5 x 14, 8K (267 x 388 mm), 11 x 17,
Non standard size (Length at 6.7 or 170 mm or below: cannot be offset)
* indicates paper sizes that cannot be offset, and Large Output cannot be selected.
Stapling Valid sizes : A5
, B5, A4, 8.5 x 11, B5, A4, B4, A3, 8.5 x 11Ó, 8.5 x 13Ó,
8.5 x 14Ó, 8K (267 X 388 MM), 11 x 17Ó
Number of sheets: 50 sheets
Punching Valid sizes: B5, A4, 8.5 x 11, B4, A3, 11 x 17
   Staple Cartridge
Staple Case Capacity 5000 staples x 3 /box
   Tray 6 (High Capacity Feeder)
Power From main body of machine
Power Consumption 21 W
Size (W) 356 x (D) 652 x (H) 580 mm or (W) 14.0 x (D) 25.7 x (H) 22.8
Dimensions Main body + Output Tray (extended) + High Capacity Feeder:
(W) 1370 x (D) 778 mmm or (W) 53.9 x (D) 30.6
Weight 39 kg or 85.8 lbs
Paper Supply 3600 sheets (20 lbs or 80g/m2)
Paper Size A4, B5, 8.5 X 11
   Offset Catch Tray (Optional)
Power From main body of machine
Power Consumption 3 W
Paper Size (Collated/Uncollated)A6*, B6*, A5*, A5, 5.5 x 8.5*, B5, B5, A4, A4, 8.5 x 11,
8.5 x 11
, 8.5 x 13, 8.5 x 14, B4, 8K (267 X 388 mm), A3, 11 x 17Ó,
Non standard size (Length at 6.7 or 170 mm or below: cannot be offset)
* indicates paper sizes that cannot be offset
Capacity 500 sheets (20 lbs or 80g/m2)
Dimensions Main body + Offset catch tray: (W) 1014 x (D) 778 mm or (W) 39.9 x (D) 30.6