Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

							8-7  Emptying the Punch Scrap Container209
Daily Care
8
Empty all the scraps.
Insert the Punch Scrap
Container and push it into
the machine.
Close the Front Door of the
Finisher.
You must dispose of all the scraps in
the container even if you have just
pulled the container out a little.  This
is because the machine will sense
that the container has been pulled
out.  If you do not dispose of the
scraps, the container may be full
before the next punch scrap
container disposal message is
displayed thus causing the machine
to fail. 
						

							8-8  Checking the Billing Meter210
Daily Care
8
Checking the Billing Meter
You can check the meter on the Settings/Meter Check screen.
Current Count .......Shows the number of copies made up till the present
time.
Procedure
Press Settings/Meter Check.
Select Meter Check.
The following types of copies are not
counted:
¥Blank sheets inserted by the
machine.
(A blank sheet is automatically
inserted if the total number of
sheets of the documents is an odd
number for 2 Sided.)
¥First and last blank pages when
making copies by using Book
Duplex feature.
¥Separators for transparencies
when the Transparency
Separators feature is used.
¥Jammed papers or partially done
copies as a result of machine fault.
¥Paper which is fed for fuser
cleaning
On a model with the printer function
installed, the number of copies
printed by using this function can be
displayed. To use this function,
contact your local authorized
Panasonic service representative.
9-3:  Confirming the Account Data
for information on how to confirm the
account data of each user when the
Auditron feature is used.
The screen on the right is displayed
when the Auditron feature is
enabled.  See 
Chapter 9 Using the
Auditron Feature
 for details. 
						

							8-8  Checking the Billing Meter211
Daily Care
8
Check the reading.
Select Close until the default screen is shown.
The Settings/Meter Check screen clears and the default screen re-appears. 
						

							8-9  Making Clean Copies212
Daily Care
8
Making Clean Copies
Regular cleaning of the internal parts of the machine helps in producing
clean copies every time.  This machine is equipped with a feature that
allows plain paper to be fed for automatically removing dirt, which easily
accumulates on the fuser unit and other internal parts.
Procedure
If paper other than plain paper are loaded in the trays,
temporarily remove them.  Confirm that plain paper is loaded in
any of the trays other than Tray 5 (Bypass).
 Press Settings/Meter Check.
Select Fuser Cleaning.
The paper which is fed for fuser
cleaning depends on the sizes of
paper loaded in the trays.  Paper will
be automatically fed based on the
following priority:
(1) One sheet of A3
(2) Two sheets of A4
(3) Two sheets of paper in portrait
orientation with greatest length.
The paper used for fuser cleaning
will not be recorded by the billing
meter.
If your copy volume is large, it is
possible to set fuser cleaning to
activate automatically.  Contact your
local authorized Panasonic service
representative. 
						

							8-9  Making Clean Copies213
Daily Care
8
Select Start.
If fuser unit is not warmed up, wait a while for cleaning to begin.
The following screen is displayed while the fuser cleaning is in progress.
No copy job can be done during this time.
After the end of fuser cleaning, the Fuser Cleaning screen re-appears.
 Select Close until the default screen is shown.
The Settings/Meter Check screen clears and the default screen re-appears. 
						

							This page is intentionally left blank. 
						

							9-1 Auditron ...................................................................... 216
9-2 Displaying the Auditron Administration Mode Screen . 218
9-3 Confirming the Account Data ...................................... 220
9-4 Editing the Account Data ............................................ 223
9-5 Deleting the Account Data .......................................... 227
9-6 Enabling/Disabling Auditron ........................................ 229
9-7 Defining Automatic Display of the Password Entry
Screen ........................................................................ 231
9-8 Changing the Auditron Access Number ...................... 233
9
Using the Auditron Feature 
						

							9-1  Auditron216
Using the Auditron Feature
9
Auditron
When the Auditron mode is enabled, the copy volume of each account user
can be calculated.  This is done by assigning a Password to each account
user.
The relationship between the Password Entry screen and a normal
screen is as shown below.
Using the Auditron Mode
In the Auditron Administration Mode, select On for Auditron Mode on the
Auditron Setup screen and register a Password for every account by using
the Create/Modify Accounts screen.
9-4: Editing the Account Data
9-6: Enabling/Disabling Auditron 
						

							9-1  Auditron217
Using the Auditron Feature
9
The following operations can be done in the Auditron Administration mode.
Item Description
Reviewing the Account Data The password, copy limit and current copy volume
settings can be reviewed for every account.
¥ 9-3: Confirming the Account Data
Creating/Modifying Account Data The password and copy limit of each account
can be created/modified.
Up to 300 accounts can be registered.
¥ 9-4: Editing the Account Data
Deleting the Account Data The copy volume, copy limit and password
settings of each account can be deleted for all
accounts and set to zero.  You can also choose
to delete only the copy volume and copy limit.
¥ 9-5: Deleting the Account Data
Enabling the Auditron Feature You can choose to enable/disable the Auditron
Mode.  Select On for Auditron Mode on the
Auditron Setup screen to enable it.  When power
is switched on after exiting from the Settings/Meter
Check screen, the Password Entry screen will be
displayed.
¥ 9-6: Enabling/Disabling Auditron
Defining the Automatic Display You can define the timeout period to automatically
of Password Entry Screen display the Password Entry screen after a copy
job is completed.
¥ 9-7: Defining Automatic Display of the Password
    Entry Screen
Changing the Access Number You can change the Access Number of the
Auditron Administrator using 4 to 12 digits.
  ¥ 9-8: Changing the Auditron Access Number
2-sided copy volume and print
volume can be calculated. To use
this feature, contact your local
authorized Panasonic service
representative.
Copy limit refers to the setting of the
maximum number of copies which
can be made. 
						

							9-2  Displaying the Auditron Administration Mode Screen218
Using the Auditron Feature
9
Displaying the Auditron Administration Mode Screen
This section explains the procedures for displaying the Auditron
Administration Mode screen.
Procedure
Press Settings/Meter Check.
Select Auditron Admin. Mode.
Enter the Access Number of the Auditron Administrator and
select Confirm.
Each input digit is represented by an asterisk.
The Auditron Administration Mode screen is displayed.
Displaying the Auditron
Administration Mode Screen
If you made a mistake while entering
the Access Number, press the Clear
C button to clear and re-enter.
The factory default is Ò11111Ó.
9-8:  Changing the Auditron Access
Number
 for information on how to
change the Access Number of the
Auditron Administrator.
The screen on the right has the
Auditron mode enabled.