Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

							5-9  Interleaving Blank Sheets Between Transparencies (Transparency Separators)99
Added Features
5
Interleaving Blank Sheets
Between Transparencies
(Transparency Separators)
Transparencies, transparency
separators, and paper for
distribution copies must be of the
same size and loaded in the same
orientation.
The sizes must be either
A4 or 8.5 x 11.
The Transparency Separators feature allows you to make copies on
transparencies and output them with blank sheets of paper inserted
as transparency separators between them. You can also make copies
for distribution (N Sets) at the same time.
When making copies on transparencies with separators (Blank
Separators)
When making distribution copies besides the transparencies (Blank
Separators & N Sets) 
						

							5-9  Interleaving Blank Sheets Between Transparencies (Transparency Separators)100
Added Features
5
Chapter 3 Loading Documents on
how to load documents.
Procedure
Load the document.
Select Features Menu. Then select Transparency
Separators.
Select Blank Separators.  When making distribution copies at
the same time, select Blank Sep & N Sets.
For example, select Blank Sep & N Sets.
Confirm the selection of the tray loaded with transparencies
and the tray containing paper to be used as separators.
To change tray settings, select Paper Tray Settings.
(If not changing tray settings, proceed to Step 6.)
The factory default is No
Separators.
Select Cancel to cancel the settings.
The screen on the right has the
Finisher installed.
Paper for separators/distribution
copies must be of the same size as
the transparencies (select either A4
or 8.5 x 11).
The factory default is Tray 5
(Bypass) for transparencies.  The
default can be changed by using
Tools Mode screen. 
						

							5-9  Interleaving Blank Sheets Between Transparencies (Transparency Separators)101
Added Features
5
Select the paper tray to be used, and select Save.
Confirm the settings, and select Save.
Load transparencies in
Tray 5 (Bypass).
Load them in the same orientation
as the separators/paper used for
distribution sets.
(If the tray is changed in
Step 5, load them in that
tray.)
Select other features if necessary.
If Blank Sep & N Sets is selected in Step 3, enter the number
of sets for distribution copies with the keypad.
Only one set of the transparencies is copied.
Press Start.
Copies are made on the transparencies and they are delivered with separators
inserted between them.
If Blank Sep & N Sets is selected, the number of sets entered for distribution
copies are also delivered.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
The screen on the right has the Tray
6 (High Capacity Feeder) installed.
Auto, Tray 1, Tray 6 (High Capacity
Feeder) cannot be used as the tray
for transparencies.
Auto, Tray 5 (Bypass) cannot used
as the tray for separators and
distribution sets.
Select different trays for
transparencies and separators/
distribution copies.
Select Cancel to cancel the settings.
Loading Paper in Tray 5 (Bypass) of
2-3: Loading Paper. 
						

							5-10 Selecting the Original Orientation (Original Orientation)102
Added Features
5
The Original Orientation feature allows you to specify the text orientation of
the document if you have selected 2 Sided, Multi-Up (N Up), Image Shift,
Edge Erase/Copy All, Repeat Image or Stapling/Punching (optional).
Select Head to Left if the orientation of the document is such that the head
of the document aligns with the left guide of the Document Glass.
Procedure
Load the document.
Select Features Menu. Then select Original Orientation.
Selecting the Original
Orientation
(Original Orientation)
The default value of Original
Orientation can be changed by using
Tools Mode. The factory default is
Head to Top.
If you have also selected Book
Copying or Book Duplex besides
Original Orientation, the following
are automatically selected:
For Right Page Then Left or Left
Page Then Right
        Head to Top
For Top Page Then Bottom
        Head to Left
Chapter 3 Loading Documents for
information on how to load
documents.
For Head to Left, do not  load
documents as follows.
The screen on the right has the
Finisher installed.
Original Orientation can also be
selected on the Customized
Features screen. 
						

							5-10 Selecting the Original Orientation (Original Orientation)103
Added Features
5
Select the corresponding document orientation of the original
loaded.
Select Head to Top or Head to Left.
Select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies are made in the orientation selected in Step 3.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Select Cancel to cancel the settings. 
						

							5-11  Rotating and Copying in Different Directions (Image Rotation)104
Added Features
5
The Image Rotation feature allows you to make copies in the correct
orientation even if the orientation of the paper is different from the loaded
document. This is because the machine will automatically rotate the image
of the document to match the orientation of the paper.
The factory default of Image Rotation is set to On.
Image Rotation will be valid if any of the following conditions is met.
When document is loaded in DADF
When document is loaded on the document glass, and Auto is selected
for Paper Supply, and Auto % for Reduce/Enlarge
When document is loaded on the document glass, and document size is
input
When the following features are selected:
Image Shift (Corner Shift, Auto Center (Centre)), Book Copying, Multi-
Up (N Up), Repeat Image, Book Duplex
Rotating and Copying in
Different Directions
(Image Rotation)
The default value of Image Rotation
can be changed by using Tools
Mode. As the factory default of
Image Rotation is On, you do not
need to enable it. See 
Feature
Defaults 
in 6-1: List of Custom
Preset Functions
 for information on
how to define the settings.
When paper is loaded in Tray 5
(Bypass), Image Rotation is invalid. 
						

							5-11  Rotating and Copying in Different Directions (Image Rotation)105
Added Features
5
Procedure
Load the document.
Select Features Menu. Then select Image Rotation.
 The factory default of Image Rotation is On.
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies are delivered with images automatically rotated if the orientations of the
document and the paper are different.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
The factory default of Image
Rotation is On.
Select Off to cancel Image Rotation.
Chapter 3 Loading Documents for
information on how to load
documents.
The screen on the right has the
Finisher installed.
Image Rotation can also be
selected on the Customized
Features screen. 
						

							5-12  Selecting the Original Size (Original Size)106
Added Features
5
The Original Size feature allows you to specify the document size to copy if
you wish to copy a non standard size document or part of the document.
Also, you have to specify the size of the document to copy in the case of
highly permeable media like transparencies as their document sizes cannot
be easily detected by the machine.
The ruler markings around the document glass is useful for measuring the
size of the document.
The document area to be copied differs as follows when the document is
loaded onto the DADF or the document glass.
Selecting the Original Size
(Original Size)
When making copies of name cards,
receipts, etc., the use of Original
Size will allow the blank parts of
these to be neatly copied.
If you have to make copies of non
standard size documents frequently,
it will be useful to customize these
sizes as defaults and save their
settings beforehand. In this way, you
do not have to select them each time
when you make copies.  See
Original Size Defaults in 6-1: List of
Custom Preset Functions
 for details. 
						

							5-12  Selecting the Original Size (Original Size)107
Added Features
5
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
The factory default of Document
Size Input is Auto Detect.
Select Cancel to cancel the settings.
When copying an open bound
document, specify the dimensions of
the combined area of its facing
pages as the document size. When
copying only one side of an open
bound document, specify only the
area of the side that is to be copied.
You can also simply use the ruler
markings on the document glass to
determine the size of your original.
When          buttons are pressed
continuously, the screen changes
rapidly.
Procedure
Load the document.
Select Features Menu. Then select Original Size.
Select the desired original size.
Use the           buttons to enter the length (X) and width (Y) of the document
manually.  You can specify a value between 1-432 mm for the length (X) and a
value between 1-297 mm for the width (Y).
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies are made according to the size specified in Step 3.
Chapter 3 Loading Documents for
information on how to load
documents.
The screen on the right has the
Finisher installed.
Original Size can also be selected
from the Customised Features
screen. 
						

							5-13  Enhancing Sharpness (Sharpness)108
Added Features
5
The Sharpness feature allows you to enhance or reduce the
sharpness of the image outline of a document if you have selected
Photo, or Text & Photo for Original Type.
Procedure
Load the document.
Select Features Menu. Then select     Next Page.
Enhancing Sharpness
(Sharpness)
Chapter 3 Loading Documents for
information on how to load
documents.
The default value for Sharpness can
be changed by using the Tools
Mode. The factory default is
Normal.
This feature is not available if you
have selected Text for Document
Type.
The screen on the right has the
Finisher installed.