Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

							5-1  Overview of Added Features79
Added Features
5
Sharpness
Select this option to enhance or reduce the sharpness
of an image.
5-13: Enhancing Sharpness (Sharpness)
Sample Set
Select this option to output a sample set for verification
before proceeding to output the actual copies.
5-19: Making a Sample Set (Sample Set)
Negative Image
Select this option to create negative-like copies by
reversing the black and white sections of the original
image.
5-14: Creating Negative-like Images
(Negative Image)
Mirror Image
Select this option to make copies by reversing the left/
right-page of the document.
5-15: Creating Mirror Images (Mirror Image)
Repeat Image
Select this option to make copies with repeated images
of the original.
5-16: Repeating an Image (Repeat Image)
Book Duplex
Select this option to make duplex copies that are the
same as the bound document.
5-17: Making Duplex Copies of Facing Pages
(Book Duplex)
Covers
Select this option to insert covers, such as colored
paper, for the copies.
5-18: Inserting Covers (Covers)
 Booklet Creation
Select this option to create booklets from one or two-
sided documents.
5-20: Creating a Booklet (Booklet Creation)
 Stored Jobs
Select this option to register defined copy jobs in the
Job Memory.
5-21: Job Memory Operations
Edge Erase/Copy All
Select this option to make copies with the document
cover open, or to make copies from booklets.
5-8: Erasing the Edges and Copying All
(Edge Erase/Copy All)
Book Copying
Select this option to make separate left-page and
right-page copies from a bound document.
5-6: Copying Facing Pages onto Separate Sheets
(Book Copying)
Transparency Separators
Select this option to insert blank sheets as
separators between the copied transparencies.
5-9: Interleaving Blank Sheets Between
Transparencies (Transparency Separators)
Original Size
Select this option to specify the size of the document.
5-12: Selecting the Original Size (Original Size)
 Original Orientation
Select this option to specify the orientation of the
loaded document.
5-10: Selecting the Original Orientation
(Original Orientation)
Image Rotation
Select this option to make copies after rotating the
document image by 90 degrees.
5-11: Rotating and Copying in Different Directions
(Image Rotation)
Multi-Up (N Up)
Select this option to copy several documents onto one
copy.
5-4: Copying Several Documents onto One Copy
(Multi-Up (N Up))
Mixed Size Originals
Select this option to load documents of different sizes
at the same time.
5-5: Loading Mixed Size Originals
(Mixed Size Originals) 
						

							5-2  Adjusting Copy Density (Lighter/Darker)80
Added Features
5
The Lighter/Darker feature allows you to adjust the copy density by using
the seven-grade density scale provided. The default is Normal.
Procedure
Load the document.
Select Features Menu. Then select Lighter/Darker.
Adjusting Copy Density
(Lighter/Darker)
After you have adjusted the copy
density, you can still darken the copy
by increasing the toner level if you
find that the copy is still too light.
See 8-3: Increasing the Toner Level.
The screen on the right has the
Finisher installed.
See Chapter 3 Loading Documents
for information on how to load
documents. 
						

							5-2  Adjusting Copy Density (Lighter/Darker)81
Added Features
5
Use the buttons in Lighter/Darker to select the desired copy
density.
To make a lighter copy, touch a button near Lightest. To make a darker copy,
touch a button near Darkest.
Select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
The copies are made according to the copy density value selected in Step 3.
The factory default for Lighter/
Darker is Normal.
Select Cancel to cancel the settings.
You can remove the background
color on the document by selecting
Background Suppression in
Original Type.
See 
5-3: Making a Copy according
to Original Type (Original Type)
 for
details.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details. 
						

							5-3  Making a Copy According to Original Type (Original Type)82
Added Features
5
Making a Copy According to
Original Type
(Original Type)
The Original Type feature allows you to make copies of photographs, text
or text with photographs by selecting their matching original type.
Also, if you have selected Text or Text & Photo, you can choose to remove
the background color of texts and so forth by enabling the Background
Suppression feature.
Procedure
Load the document.
Select Features Menu. Then select Original Type.
The default original type can be
changed by using Tools Mode. The
factory default is Text & Photo with
Background Suppression
selected.
Chapter 3 Loading Documents for
information on how to load
documents.
The screen on the right has the
Finisher installed. 
						

							5-3  Making a Copy According to Original Type (Original Type)83
Added Features
5
Select an original type.
When the document consists of both photograph and text:
Select Text & Photo.
Select Background Suppression to remove the background color.
When the document consists of mainly text:
Select Text. Select Background Suppression to remove the background
color.
When the document consists of mainly photographs:
Select Photo.
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
The copies are made according to the document type selected in Step 3.
Select Cancel to cancel the settings.
The factory default, Background
Suppression is being selected.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details. 
						

							5-4  Copying Several Documents onto One Copy (Multi-Up (N Up))84
Added Features
5
The Multi-Up (N Up) feature allows you to use the DADF to copy two, four or
eight sheets of documents onto one copy.
Copying Several Documents
onto One Copy
(Multi-Up (N Up))
Two, four, or eight sheets of
documents are reduced and copied
onto the selected paper. 
						

							5-4  Copying Several Documents onto One Copy (Multi-Up (N Up))85
Added Features
5
The screen on the right has the
Finisher installed
If Multi-Up (N Up) is selected,
Reduce/Enlarge becomes Auto %
and two, four, or eight sheets of
documents are reduced to fit, and
copied onto the selected paper.
Procedure
Select the tray with the desired paper size loaded from Basic
Features screen under Paper Supply.
Select Features Menu. Then select Multi-Up (N Up).
Select either 2 Up, 4 Up or 8 Up.
For example, select 2 Up.
Select a button below Image Order.
Image order refers to the order in
which two, four, or eight sheets of
documents are copied onto one
sheet of paper.  See diagram on
previous page. 
						

							5-4  Copying Several Documents onto One Copy (Multi-Up (N Up))86
Added Features
5
Select Cancel to cancel the settings.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Load the document into the DADF.
Load the document in the orientation of Head to Top, or Head to Left.
Select the corresponding document orientation of the original
loaded, then select Save.
Select Head to Top or Head to Left.
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Two documents are copied onto one piece of paper.
5-10: Selecting the Original
Orientation (Original Orientation)
Loading documents in the DADF in
3-2: Loading Documents on how to
load documents. 
						

							5-5  Loading Mixed Size Originals (Mixed Size Originals)87
Added Features
5
Loading Mixed Size Originals
(Mixed Size Originals)
The Mixed Size Originals feature allows you to use the DADF to load
documents of different sizes, and scan them all at the same time. Copies of
these documents are output according to the sizes of their originals.
Alternatively, you can choose to make copies of these documents on a
selected paper size.
When making copies matching the size of the document
When making copies on a selected paper size
Select Mixed Size Originals and
Auto for Paper Supply.
Select Mixed Size Originals  and
Auto % for Reduce/Enlarge. 
						

							5-5  Loading Mixed Size Originals (Mixed Size Originals)88
Added Features
5
Procedure
Load all documents such that they are properly inserted in the
DADF.
 On the Basic Features screen, select Auto in Paper Supply
and 100% in Reduce/Enlarge.
Select Features Menu. Then select Mixed Size Originals.
Check that On is selected.
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies are made according to their respective document sizes.
Some features cannot be selected
together with this feature. See
Appendix B Possible Combinations
of Features
 for details.
Select Cancel or Off to cancel the
settings.
Paper Supply can also be selected
on the Features Menu screen. The
factory default is Auto.
Reduce/Enlarge can also be
selected from the Features Menu.
The factory default is 100%.
The screen on the right has the
Finisher installed.
Copying on Paper Size Matching the Document Size
Loading documents in the DADF in
3-2: Loading Documents on how to
load documents.