Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

							7-2  Paper Jams179
Troubleshooting
7
Remove the jammed paper
by pulling it out slowly.
Close the Lower Right
Cover of the machine.
If the paper cannot
be removed, open the
Front Door.
Turn Knob 5 clockwise and
remove the jammed paper
by pulling it out slowly.
Close the Front Door.
If the cover is not closed completely,
error messages will continue to be
shown on the display and the
machine will not resume its
operation. If sheets of papers are
still jammed at other locations, other
error messages will be displayed.
Ready to copy.  Press Start to
continue or press C button to cancel
the job.  is displayed once the
jammed paper is removed.
If the door is not closed completely,
error messages will continue to be
shown on the display and the
machine will not resume its
operation. If sheets of papers are
still jammed at other locations, other
error messages will be displayed.
Ready to copy.  Press Start to
continue or press C button to cancel
the job.  is displayed once the
jammed paper is removed. 
						

							7-2  Paper Jams180
Troubleshooting
7
The following messages will be shown on the display if paper is jammed
inside the Finisher (optional).
Follow the instructions below to remove the jammed paper.
Procedure
Hold the handle of the
Finisher and open its top
cover.
Remove the jammed
paper.
If the jammed paper could
not be removed easily, turn
Knob 8 counter-clockwise
to eject the paper.
When making large volume output,
do not touch the area affixed with
the CAUTION label.
Paper Jam Inside the Finisher 
						

							7-2  Paper Jams181
Troubleshooting
7
The following messages will be shown on the display if paper is jammed at
one of the Finisher (optional) Trays.
Follow the instructions below to remove the jammed paper.
Procedure
Lift Cover 9 at the output
area of the Finisher as
indicated in the diagram.
Remove the jammed
paper.
If the cover is not closed completely,
error messages will continue to be
shown on the display and the
machine will not resume its
operation. If sheets of paper are still
jammed at other locations, other
error messages will be displayed.
Close the Top Cover of the
Finisher.
Paper Jam at the Finisher Tray 
						

							7-2  Paper Jams182
Troubleshooting
7
If the jammed paper could
not be removed easily,
open the Front Door of the
Finisher and turn Knob 10
counter-clockwise to eject
the paper.
Close the Front Door.
If the message is still
displayed even though the
jammed paper is removed,
lift up and lower Cover 9
again.
If the cover is not closed completely,
error messages will continue to be
shown on the display and the
machine will not resume its
operation. If sheets of paper are still
jammed at other locations, other
error messages will be displayed. 
						

							7-3  Document Jams183
Troubleshooting
7
Document Jams
The following messages will be shown on the display when the machine
stops as the document is jammed at the DADF.
Follow the instructions on the display to remove the jammed document.
After you have removed the jammed document, follow the instructions on
the display and load your document again in the DADF.
Document Jam at the Feeding Point of the DADF
The following messages will be shown on the display if the document is
jammed at the feeding point of the DADF.
Procedure
Lift the Release Latch at
the center of the DADF
and open the Left Cover
completely. 
						

							7-3  Document Jams184
Troubleshooting
7
The following messages will be shown on the display if the document is
jammed inside the DADF.
Document Jam Inside the DADF
A torn, wrinkled, or folded document
will cause it to be jammed at the
DADF.  In such a case, place the
document directly on the Document
Glass.
Remove the jammed
document.
Close the Left Cover of the
DADF until you hear a click
sound.
Check if the document is
torn, wrinkled, or folded.  If
not, follow the instructions
on the display and re-load
the document in the DADF. 
						

							7-3  Document Jams185
Troubleshooting
7
Procedure
Lift the Release Latch at
the center of the DADF
and open the Left Cover
completely.
Lift the Lever with the
Green Seal to open the
inner cover.
Remove the jammed
document.
Close the Inner Cover.
Then close the Left Cover
of the DADF until you hear
a click sound.
Check if the document is
torn, wrinkled, or folded.  If
not, follow the instructions
on the display and re-load
the document in the DADF.
The cover will be stationary when it
is fully open.
A torn, wrinkled, or folded document
will cause it to be jammed at the
DADF.  In such a case, place the
document directly on the Document
Glass. 
						

							7-3  Document Jams186
Troubleshooting
7
The following messages will be shown on the display if the document is
jammed at the Document Tray.
If the following messages are shown, refer to the descriptions in the
previous section to remove the jammed document from the feeding point of
the DADF.  When the message(s) appear, remove the jammed document
from the Document Tray.
Procedure
Remove the document
from the Document Tray.
Document Jam at the Document Tray 
						

							7-3  Document Jams187
Troubleshooting
7
Lift the Document Tray and
remove the jammed
document.
Put the Document Tray
slowly back in place.
Check if the document is
torn, wrinkled, or folded.  If
not, follow the instructions
on the display and re-load
the document in the DADF.
A torn, wrinkled, or folded document
will cause it to be jammed at the
DADF.  In such a case, place the
document directly on the Document
Glass.
Document Jam Underneath the DADF
The following messages are shown on the display if the document is
jammed underneath the DADF. 
						

							7-3  Document Jams188
Troubleshooting
7
Procedure
Lift the DADF slowly.
Remove the jammed
document.
If the document cannot be taken
out easily, turn the Knob
clockwise to remove it.
Put the DADF slowly back
in place.
Check if the document is
torn, wrinkled, or folded.  If
not, follow the instructions
on the display and re-load
the document in the DADF.
A torn, wrinkled, or folded document
will cause it to be jammed at the
DADF.  In such a case, place the
document directly on the Document
Glass.