Panasonic Digital Imaging System For Copier Dp 6000 Operating Instructions

							5-5  Loading Mixed Size Originals (Mixed Size Originals)89
Added Features
5
Select Cancel or Off to cancel the
settings.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
The screen on the right has the
Finisher installed.
Loading documents in the DADF in
3-2: Loading Documents on how to
load documents.
4-2: Selecting a Paper Tray (Paper
Supply) 
on paper tray selection.
4-3: Reducing/Enlarging (Reduce/
Enlarge)
 on reduction or enlargement.
Paper Supply and Reduce/
Enlarge can also be selected from
the Features Menu.
Procedure
Load all documents such that they are properly inserted in the
DADF. Load
On the Basic Features screen, select the paper tray with the
desired paper size in Paper Supply.
Select Auto % in Reduce/Enlarge on the Basic Features
screen.
Select Features Menu. Then select Mixed Size Originals.
Check that On is selected.
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies of the respective documents are fitted onto the selected paper size by
reducing/enlarging them accordingly.
Copying onto a Selected Paper Size 
						

							5-6  Copying Facing Pages onto Separate Sheets (Book Copying)90
Added Features
5
The Book Copying feature allows you to make copies of a document with
facing pages and binding margin.
Procedure
Select Features Menu. Then select Book Copying.
Select Left Page Then Right, Right Page Then Left, or To p
Page Then Bottom.
For example, select Left Page Then Right.
Left Page
Then RightRight Page
Then LeftTop Page
Then Bottom
Copying Facing Pages onto
Separate Sheets
(Book Copying)
This feature can only be used when
the document is placed on the
Document Glass.
The division section (binding shift
section of the original) at the center
of a bound document will be copied
with a 2 to 4 mm offset.
Non standard size documents or
documents whose sizes cannot be
detected cannot be accurately
copied as two equal portions.
The factory default for Book
Copying is Off.
Select Cancel to cancel the settings.
The screen on the right has the
Finisher installed.
Book Copying can also be selected
on the Customized Features Menu
screen. 
						

							5-6  Copying Facing Pages onto Separate Sheets (Book Copying)91
Added Features
5
Confirm the settings, and select Save.
Select other features if necessary.
Place the document on the Document Glass.
Enter the required number of sets by using the keypad and
press Start.
The document with facing pages is copied on separate sheets of paper.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Loading documents in the DADF in
3-2: Loading Documents on how to
load documents.
If you have also selected 2 Sided,
the following will result:
¥Left Page Then Right
The left page is copied onto side
one and the right page is copied
onto side two of the paper.
¥Right Page Then Left
The right page is copied onto side
one and the left page is copied
onto side two of the paper.
¥Top Page Then Bottom
The top page is copied onto side
one and the bottom page is copied
onto side two of the paper.
If the number of sets is 1, copying
will be done in the order of A to B
with the first page discharged facing
up. 
						

							5-7  Setting the Margins (Image Shift)92
Added Features
5
The Image Shift feature allows you to move the position of the original
image up, down, left, right or center. Also, it allows you to set a top, bottom,
left, or right margin.
Image is shifted to each corner
Image is shifted to center of paper (Auto Center (Centre))
The center of the document is shifted to match the center of the paper for
copying.
Setting margin
Margin is set by shifting the document top, bottom, left, or right
between 1-432 mm at 1 mm intervals for copying.
Setting the Margins
(Image Shift)
The default value of Image Shift can
be changed by using the Tools
Mode. The factory default is No
Shift.
When loading document on the
document glass and selecting
Image Shift, be sure to input the
document size.  See 
5-12:  Selecting
the Original Size (Original Size)
 for
method on document size input. 
						

							5-7  Setting the Margins (Image Shift)93
Added Features
5
The factory default is No Shift.
Select Cancel to cancel the settings.
The screen on the right has the
Finisher installed.
Procedure
Select Features Menu. Then select Image Shift.
Select Side 1.
Select the position to shift the document to.
For example, set a left margin of 10 mm      Set  button (Right) at 10 mm.
¥ Corner Shift: Select       .
¥ Auto Center (Centre): Select Auto Center (Centre).
¥ Margin: Use  
      buttons to set up, down, left, or right
margin between 0 - 432 mm. 
						

							5-7  Setting the Margins (Image Shift)94
Added Features
5
Load the document.
¥ When loading document in DADF:
Load document in the orientation of Head to Top or Head to Left.
¥ When loading document on the Document Glass:
Load document in the orientation of Head to Top or Head to Left.
Enter the document size with Original Size from Features
Menu.
Select the corresponding document orientation of the original
loaded.
Select Head to Top or Head to Left.
Confirm the settings, and select Save.
The factory default is Head to Top.
See 5-10:  Selecting the Original
Orientation (Original Orientation)
 for
the details.
The direction of image shift (up/
down/left/right) is determined by the
document orientation.  If the
document orientation of the
document loaded is different from
that of the paper, the origin of the
shift (up/down) will also be different,
and hence, image shift will not be
performed correctly.
Chapter 3  Loading Documents for
information on how to load
documents.
When the document is loaded on the
document glass, and if input of the
document size were not done,
image shift will not be executed
correctly.
See 
5-12: Selecting the Original
Size (Original Size)
. 
						

							5-7  Setting the Margins (Image Shift)95
Added Features
5
Select Side 2 when making two-sided copies, and define the
image and binding shifts. Select Mirror Shift if you want side
two of the document to be a mirror image of side one.
Confirm the settings, and select Save twice.
Select the paper size from Paper Supply and % from Reduce/
Enlarge.
When Image Shift, or Auto Center (Centre) is selected, select a paper size
larger than the document, or adjust Reduce/Enlarge.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies are made according to the image shift settings made.
When paper is the same size as the
document, and Reduce/Enlarge is
at 100% (factory default), copy
position will not be shifted.
Some features cannot be selected
together with this feature.  See
Appendix B:  Possible Combinations
of Features
 for details.
Select Cancel to cancel the settings.
The factory default is Mirror Shift.
Normally, you should select Mirror
Shift when inserting the binding shift
on a two-sided copy. 
						

							5-8  Erasing the Edges and Copying All (Edge Erase/Copy All)96
Added Features
5
When copying with the document cover open or when copying bound
documents, shadows are sometimes found at the edges or center of the
copies made. These shadows can be erased with the feature, Edge Erase.
It is also possible to make a copy without erasing these shadows by
selecting Copy All.
Erasing the shadows of documents (Edge Erase)
Set the amount of erase of shadows on the top, bottom, left, or right,
center of the document.  The part which Edge Erase is set will not be
copied (that is, will be erased).
Copying onto whole area of paper (Copy All)
Amount of erase is 0 mm, and the entire page is copied.
Erasing the Edges and
Copying All
(Edge Erase/Copy All)
The Edge Erase default value can
be changed by using the Tools
Mode. The factory default is Normal
(T&B, L&R: 2 mm and
Center: 0 mm)
No copying can be done onto the 2
mm border area of the paper.
If you have selected Reduce/
Enlarge, the area for edge erase will
also be reduced/enlarged.
If you have selected Book Copying,
Edge Erase will be based on the
entire image of the document.
If you have also selected Multi-Up
(N Up) and Center (Centre) Erase,
then Edge Erase will be based on
the individual original image.
When Copy All is selected,
depending on the type of document
used, the edges of the copies made
may contain marks or image loss
may result. 
						

							5-8  Erasing the Edges and Copying All (Edge Erase/Copy All)97
Added Features
5
Procedure
Select Features Menu. Then select Edge Erase/Copy All.
Select Copy All to copy the entire page.  To erase edges,
select Variable Erase.
If you have selected Variable Erase, use   buttons to select
a value for Top & Bottom Edges (2-50 mm), Left & Right Edges
(2-50 mm) and Center (Centre) Erase (0-50 mm).
For example, select Top & Bottom Edges: 10 mm and Left & Right Edges:
10 mm.The factory default is Normal (T&B:
2 mm, L&R: 2 mm and Center: 0
mm).
Select Cancel to cancel the settings.
The screen on the right has the
Finisher installed. 
						

							5-8  Erasing the Edges and Copying All (Edge Erase/Copy All)98
Added Features
5
5-10: Selecting the Original
Orientation (Original Orientation) 
for
details.
Some features cannot be selected
together with this feature. See
Appendix B: Possible Combinations
of Features
 for details.
Chapter 3 Loading Documents for
information on how to load
documents.
Load document in the orientation of Head to Top or Head to Left.
Select the corresponding document orientation of the original
loaded, and select Save.
Select Head to Top or Head to Left.
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies are made according to the edge erase settings defined in Steps 2 and 3 .
If you make copies with the document cover open, avoid
looking directly at the copy lamp. Direct eye exposure can
cause eye fatigue or damage.