Oce ColorWave 600 User Manual

							Define the media type and the core size
How to define the media type and the core size
#
Illustration
Action If the displayed media type and core size is correct you
can press 'Next' and go to step 4.
Otherwise, 
press 'Other media' and continue with step
2.
1 Use 
the 'Scroll wheel' to select the correct media type
from 
the list and confirm your entry with the 'Confir-
mation 
key'.
Note:
If the correct media type is not available on
your 
printer operator panel, you must first
make 
a new media profile available on the
printer 
operator panel. (see  ‘Make a new media
profile available on the printer operator panel’
on page

 161) 2
Use the 'Scroll wheel' to select the correct core size for
your 
new media roll and confirm your entry with the
'Confirmation
 
key'.
Note:
The standard roll core size for the 'Océ Color-
Wave ®
 
600 Printer' is 3". 3
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 301Define the media type and the core size
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Use the 'Scroll wheel' to select the clean-cut length for
your new media roll and confirm your entry with the
'Confirmation
 
key'
Note:
Select 'Long strip' for new media. 4
Press 'Finish' and return to the 'Home' screen.
Note:
When the strip is cut, the new media is ready
for use.5
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system302Define the media type and the core size
Downloaded From ManualsPrinter.com Manuals 
						

							The output delivery
Introduction
There are four factors that can influence the delivery destination of the printed output.
1. The 
media profile of the media you use.
Some media profiles require a specific output delivery. If the correct media profile is available
on 
your printer operator panel, the Océ ColorWave 600 automatically selects the correct
output 
delivery.
If 
the correct media is not available on your printer operator panel, you can download the
media 
profile from the Océ website (see ‘Download a media profile from the Océ web site’  on
page  286
) and upload the media profile to the 'Océ PowerM controller' / 'Océ PowerM Plus
controller 
' (see ‘Upload a media profile’  on page 287).
2. The 
media roll core size of the media you use.
3. The 
'Delivery destination' setting that you defined in the Océ Express WebTools.
To 
set the default 'Delivery destination' select the 'Preferences' - 'Print job defaults' tab.
4. When 
you define print job settings in the printer drivers or the job submission tools, these
values 
always overrule the default values defined in the Océ Express WebTools. Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 303The output delivery
Downloaded From ManualsPrinter.com Manuals 
						

							The output deliveryAttention:
The following table gives an overview of the common output delivery destination. If the
media profile of the media you use requires a specific output delivery, the common delivery
destination will be overruled.
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system304The output delivery
Downloaded From ManualsPrinter.com Manuals 
						

							#
Then the printed output
and the default
'Delivery destina-
tion' is
When the
media roll
you use
has a
is delivered at the 'Top Delivery Tray (TDT)' 'Top Delivery Tray
(TDT)'
3" roll
core
is 
lead through the slot below the 'Top back cover'
at 
the back of the printer. 'External output
(back)'
3" roll
core
Ignored 2" roll
core
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 305The output delivery
Downloaded From ManualsPrinter.com Manuals 
						

							Make a new media profile available on the printer operator
panel
How to make a new media profile available on the printer operator panel
1.Download 

the correct media profile from the Océ website. (see  ‘Download a media profile
from the Océ web 
site’  on page 286)
2. Upload
 the correct media profile to the Océ ColorWave 600 
embedded controller. (see
‘Upload a
 media profile’  
on page 287)
3. Click
 the check box of a media profile and click the 'Enable' button in the toolbar above
the media profiles list to make 
the media profile available on the printer operator panel.
Note:
You cannot restart the Océ ColorWave 600 controller. You can only switch off and on
the Océ ColorWave 600 
printer. The media list on the printer operator panel will be
updated
 automatically. Chapter 7
 - Manage media on the Océ ColorWave 600 printing system306Make a
 new media profile available on the printer operator panel
Downloaded From ManualsPrinter.com Manuals 
						

							Define the correct media for your jobs
Definition
To achieve optimal output quality, make sure that you load and define the correct media
type on the printer.
Make 
sure you define the correct media type for your job. Check if the media type (with
the correct media format) that you 
defined in your job is available on the printer. #
When productivity with different media sizes is the most important requirement.
Load up to 
6 media rolls on the printer with different media sizes and the
same 
media types.
1
Use 
the 'Landscape' orientation to print a job on a media size that is one size
smaller than the media defined on the system. For example, A1 prints in
landscape

 on A0 and A2 prints in landscape on A1. You are not required to
cut 
the media by hand.
2
Use 
the 'Auto rotate landscape' setting or the 'Auto rotate landscape with
additional
 180° rotation' in the Océ Express WebTools or the job submission
tools to rotate the orientation automatically.
3
Note:
The above procedure is based on DIN media sizes. You can also use this procedure with
ANSI media sizes. #
When productivity is the only important requirement.
Load and define two or more media rolls on the printer with the same media
sizes and the same media types.
Note:
When roll 1 is empty, the printer switches automatically to roll 2. 1
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 307Define the correct media for your jobs
Downloaded From ManualsPrinter.com Manuals 
						

							Laminate the media
Introduction
For durability or protection purposes you can decide to laminate your printed output. Please refer to the specific white paper for laminating Océ ColorWave 600 prints to find
an overview

 of the advised Océ Laminates and the advised settings for your laminating
device. Chapter 7
 - Manage media on the Océ ColorWave 600 printing system308Laminate the media
Downloaded From ManualsPrinter.com Manuals 
						

							Cut the media
Introduction
When a media jam occurs, one of the steps to solve the problem is to cut the jammed
media. The
 printer operator panel displays the following message. How to cut the media
#
Illustration
Action Use 
your right hand to push
down the metal plate that guides
the media. Use your left hand to
cut 
the media from left to right
with
 
the knife behind the front
cover.
1
Again, push
 down the metal
plate 
that guides the media to
place 
the knife back into the
original
 
position. 2
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 309Cut the media
Downloaded From ManualsPrinter.com Manuals 
						

							Chapter 7 - Manage media on the Océ ColorWave 600 printing system310Cut the media
Downloaded From ManualsPrinter.com Manuals