Oce ColorWave 600 User Manual

							Illustration
Action Press the lower left softkey to toggle between the first
language and the second language.
Note:
Only the first language (default language) and
the second language (alternative language) de-
fined in the Océ Express WebTools are 
avail-
able on the Printer operator panel. 3
Chapter 4
 - Configure the printing system 131Change the display language of the printer
Downloaded From ManualsPrinter.com Manuals 
						

							Configure the network settings on the printer operator panel
When to do
When you have no connection to the Océ ColorWave 600 printer you cannot use the
Océ 
Express WebTools to edit the network settings. This situation can occur at first in-
stallation 
or when there is no network connection due to invalid network settings.
Before you begin If you integrate the printer according to a network policy, contact your network admin-
istrator to get information about the network infrastructure 
and parameters.
As
 a network administrator, please refer to the Océ TDS/TCS Connectivity Manual
(available 
on CD delivered with your system) to get information about the different net-
work 
infrastructures and configurations.
How 
to configure the network settings on the printer operator panel #
Illustration
Action In the 'Home' screen of the printer operator panel se-
lect 
'System' with the lower left softkey.
1 Select 'Configuration' with the upper right softkey.2
Chapter 4
 - Configure the printing system132Configure the network settings on the printer operator panel
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Use the scroll wheel to select 'Network settings' and
press the
 confirmation key.
3 The printer operator panel displays the current network
settings. To change these settings press 'begin' - lower
right softkey - to start 
the network connection proce-
dure.
4 The 
following message is displayed:
'This 
wizard assists you to connect the printer to the
network'.
Use
 
the 'Upper right softkey' to go to the next step. 5
Chapter 4
 - Configure the printing system 133Configure the network settings on the printer operator panel
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Select one of the following options.
• 'Auto detect
 (IPv4 only)'
Use

 
the 'Scroll wheel' to select 'Auto detect (IPv4
only)' 
if the system must automatically detect your
network 
settings. Confirm your entry with the
'Confirmation
 
key' above the 'Scroll wheel'.
Use
 the 'Upper right softkey' to go to next step and
continue with step 9.
• 'Manual'
Use 

the 'Scroll wheel' to select 'Manual' if you want
to 
configure the network settings manually. Con-
firm
 your entry with the 'Confirmation key' above
the 'Scroll wheel'.
Use

 the 'Upper right softkey' to go to the next step.
You must now first follow 
the procedure to enter
the
 network settings manually. (see 
‘Configure the
network 
settings manually’  on page 61)
6 The 
following message is displayed:
'Auto network
 discovery in progress'
7 The 
printer operator panel now displays the network
settings.
Record 
the IP address (for example, 134.188.26.173).
You need this IP address to access 
the 'Océ Express
WebTools'
 later in order to complete the printer con-
figuration.
Use the 'Upper right softkey' to finish the network in-
stallation 
procedure. 8
Chapter 4
 - Configure the printing system134Configure the network settings on the printer operator panel
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action When you are ready and have left the wizard, the sys-
tem indicates
 if you 
have to restart the controller of
the 
Océ ColorWave 600 printer to apply the new net-
work 

settings. This can, for example, be the case when
settings are received through DHCP. When no indica-
tion appears, you do not need to restart the controller. 9
Chapter 4
 - Configure the printing system 135Configure the network settings on the printer operator panel
Downloaded From ManualsPrinter.com Manuals 
						

							Configure print jobs
Relevant settings in the Océ Express WebTools
Set the default print job settings
Definition
You can use the Océ Express WebTools to configure the default values for the print job
settings. 
The print job settings are grouped under the 'Preferences' - 'Print job defaults'.
You can find 
a short explanation of the most important print job defaults below.
When you
 
define print job settings in the printer drivers or the job submission tools,
these values
 always overrule the default values defined in the Océ Express WebTools.
Illustration Overview of the 'Print job defaults' - 'Basic'
Editable for Key operator and Power user.
Chapter 4
 - Configure the printing system136Set the default print job settings
Downloaded From ManualsPrinter.com Manuals 
						

							'Preferences' - 'Print job defaults' - 'Basic'
#
Description
Setting
Enter the default value for the number of times you want
your 
jobs to be printed.
'Number of
 sets'
•Select 

'On (sort by set)' if your printed output must be
sorted by set (123 - 123).
• Select 'Off

 (sort 
by page)' if your printed output must
be sorted
 by page (11 - 22 
- 33).
'Collate'
•Select 'Top
 delivery tray' if your 
printed output must
default be
 delivered in the Top delivery tray.
• Select 'External

 output (back)' if your 
printed output
must default
 be delivered at the back of the printer. Se-
lect this option if you want to use the optional 'Receiv-
ing rack (basket)' or a folder.
Note:
If you use 2 inch core media, the output is always
delivered at
 the back of the printer. 'Delivery destination'
(see 
‘Set the 'Color mode' ’
 on page 316)
'Color
 mode'
(see  ‘Set the 'Print Setting' ’ 
on page 317)
'Print
 Setting'
(see  ‘Set the 'Production Plus' setting’  
on page 321)
'Production
 Plus'
(see ‘Set 
the 'Economy monochrome enhanced' setting’  on page
322
)
'Economy
monochrome enhanced'
Overview of the 'Print job defaults' - 'Sheet' Editable for Key operator and Power user. 'Preferences' - 'Print job defaults' - 'Sheet'
Chapter 4
 - Configure the printing system 137Set the default print job settings
Downloaded From ManualsPrinter.com Manuals 
						

							#
Description
Setting
The 'Media source' setting can be used to select the default
output material and format. The 'System' screen of the
printer 
operator panel will show you what rolls are currently
loaded.
You can select 
'Automatic' or you can select a specific roll
number 
that the Océ ColorWave 600 must use by default.
'Media source'
If you
 
select 'Media source': 'Automatic' you can also set
the 'Media selection policy' setting.
When

 you select 
'Automatic next larger' the printer auto-
matically selects
 the media roll with the exact media size
for your

 
print job. If the media roll with the exact media
size 
is not available the next larger media roll on the printer
is selected.
When 
 you select 'Automatic exact fit' the printer automat-
ically selects the media roll with the exact media size for
your

 
print job. If the media roll with the exact media size
is not
 
available a media request pops up.
'Media
 selection policy'
•Select 'Standard' to cut 
the print to a standard media
size 
(DIN, ANSI, ...)
• Select 
''Synchro':' to cut the print at the end of the im-
age. The system cuts at the measured length of the
original 
times the scale factor.
• Select 
''Custom':' (numeric) to cut the print on a speci-
fied length. The print length is defined by value of the
setting 'Custom

 print length'.
'Print cut

 
method'
Print length if the 'Print cut method' is set to ''Custom':'.
'Custom

 print length'
When you  enter a value, the Océ ColorWave 600 
adds a
blank strip of the specified length at the beginning of the
output.
'Add leading

 strip'
When you
  enter a value, the Océ ColorWave 600 
adds a
blank strip of the specified length at the bottom of the
output.
'Add trailing

 strip'
Overview 

of the 'Print job defaults' - 'Layout'
Editable for Key operator and Power user. 'Preferences' - 'Print job defaults' - 'Layout'
Chapter 4
 - Configure the printing system138Set the default print job settings
Downloaded From ManualsPrinter.com Manuals 
						

							#
Description
Setting
'Scales the image with a defined percentage or automatically
to the media size.' (100% is no scaling)
'Scale'
'Rotates 
the image counterclockwise. Select one of the 'auto
rotate' modes to 
print faster due to less media transport.
Select 'auto
 rotate media saving' to use 
the media in the
most
 
efficient way.'.
(see 
‘Set the 'Rotation' mode’  
on page 330)
'Rotation'
'Aligns
 
the image on the media.'
(see 
‘Set the 'Alignment' mode ’
 on page 331)
'Alignment'
'When
 'on', the image is mirrored along the vertical axis
(the 
media transport direction).'
'Mirror'
'Shifts 
the image in the horizontal direction (after alignment
to 
one of the positions given in 'Alignment').'
'Horizontal
 shift'
'Shifts the
  image in the vertical direction (after 
alignment
to 
one of positions given in 'Alignment').' 'Vertical shift'
Chapter 4
 - Configure the printing system 139Set the default print job settings
Downloaded From ManualsPrinter.com Manuals 
						

							Set the Color management settings
Introduction
In most cases, you define the color management settings for a print job during the job
submission 
process. You can select the color management settings in your print job sub-
mission application (Océ Windows ®
 printer driver, Océ Publisher Pro or Océ Publisher
Select) and if the Océ Job Ticket is enabled, these settings will overrule the default settings
that you defined in the Océ Express WebTools. If a file is sent to the printer without any
color management settings or if the Océ Job Ticket is disabled, the default color manage-
ment settings in the Océ Express WebTools are 
used to get a good output result.
The 
color management settings give information to the printer how the output should
be printed.
You 
 can find more detailed information about color management issues in the following
modules • ‘What is Color management?’  on page 332
• ‘What is

 an input profile / 
standardization?’  on page 333
• ‘What is
 Color feel?’  on page 336
• ‘Definition of

 rendering 
intents’  on page 338
• ‘What is
 an output profile?’  on page 343
• ‘Color management

 settings in the Océ Express 
WebTools’  on page 344
• ‘Color management
 settings and job submission’  
on page 345
• ‘Priorities in
 the color management settings’  on page 347
• ‘
 'Color management settings for HP-GL, HP-GL/2 and HP-RTL files' ’ on page 349
• ‘
 'Color management settings for TIFF and JPEG files' (RGB input)’  on page 350
• ‘
 'Color management settings for TIFF and JPEG files' (CMYK input)’  on page 351
• ‘
 'Color management settings for PostScript and PDF files' (RGB input)’  on page 352
• ‘
 'Color management settings for PostScript and PDF files' (CMYK input)’  on page 353
Color 
management settings The 
color management settings in the Océ Express WebTools are predefined settings
that 
give an optimal output result for different file types. Click 
'Preferences' - 'Print job defaults' to define the following settings.
Chapter 4
 - Configure the printing system140Set the Color management settings
Downloaded From ManualsPrinter.com Manuals