Oce ColorWave 600 User Manual

							'Advanced' / 'Rendering' settings
Introduction
You can tune the color settings and rendering options.
Note:
For Océ Publisher Copy it is advised to define the following color settings.• 'Color mode':
 'Océ enhanced colors'
• 'RGB 
input data': 'sRGB'
• 'Rendering intent':
 'Relative colorimetric' Illustration
'Color mode'
Define whether the document is printed in 'Color' or in 'Grayscale'.
When

 you select 
'Color', you are invited to define the 'Color mode'. Select: #
to 
use the default value set on the printer.'Printer's color feel'
Chapter 6
 - The Océ Publisher Copy option 271'Advanced' / 'Rendering' settings
Downloaded From ManualsPrinter.com Manuals 
						

							to use the color feel embedded into to the file. This
information
 was set by the application that created the
file.
'Document's color feel'
to 
manually fine-tune the combination of the color
input data
 and 'Rendering intent'.
'Océ enhanced colors'
to 
fine-tune the rendering of the printed colors.
'Predefined color
 feel'
'Color 
mode': 'Océ enhanced colors' When the color feel is set to 'Océ enhanced colors', you can define the color settings for
the selected file.
Click 
'Edit' to open the 'Edit Colors Settings' window and configure the settings:
• the RGB
 
data interpretation: 'sRGB' or 'Adobe RGB'.
• the CMYK
 data interpretation: 'Euroscale coated', 'Euroscale uncoated', 'US Web
coated

 (SWOP)' or 'US Web 
uncoated'. This setting is not available for HPGL/2,
HPGL 
or HP-RTL files.
• the 
'Rendering intent': 'Perceptual (photo)', 'Saturation (business graphics)', 'Absolute
colorimetric', 'Relative colorimetric'.
Note:
The availability of the print settings depends on the format of the file.
Note:
For a file, the default value of each color setting is the default value defined for this type
of file. 'Quality'
Select the 'Quality' level 
to be applied: #
to reduce the amount of toner used and produce lighter
images with less 
details.
'Economy'
for high productivity of good quality prints.
'Production'
to 

create rich, detailed images but with a reduced pro-
ductivity. 'Presentation'
Chapter 6
 - The Océ Publisher Copy option272'Advanced' / 'Rendering' settings
Downloaded From ManualsPrinter.com Manuals 
						

							to select the best print setting for each document, based
on the graphical content. It is configured on the
printer.'Océ Print Assistant'
Chapter 6
 - The Océ Publisher Copy option 273'Advanced' / 'Rendering' settings
Downloaded From ManualsPrinter.com Manuals 
						

							'Advanced' / 'Finishing' settings
Introduction
The 'Finishing' options displayed depend on the printer available options.
'Additional 
strips'
Depending on printer capabilities, you can 
add a 'Leading strip', a 'Trailing strip', or a
'Binding strip'
 to 
correct the length of the output. The adjustment of the edges changes
the
 output format.
The 

'Leading strip' adds a strip at the top of the printout (0 to 400 mm / 0 to 15.74 in).
The 

'Trailing strip' adds a strip at the bottom of the printout (0 to 400 mm / 0 to 15.74
in).
The 
'Binding strip' is an additional strip set to punch holes or to create tabs on a folded
printout.
Note:
The system displays the units ('mm'/'in') defined in the 'User Preferences'. 'Finishing options'
If a folder is declared in the print system, you can 
check the 'Fold' option.
The
 
system uses the 'Image Properties' to fold the printout, in order to put the legend
on top
 of the folded packet.
The 
'Delivery destination' depends on the printer capabilities and on the 'Fold' option.
Depending
 on the printer, you can set the 'Delivery destination' of an unfolded printout
to:
• The 
printer back output:
- 'Copy
 Delivery Tray'
- 'Two-tray

 stacker'
- 'External

 output'
- 'Back

 output'
- 'Lower
  receiving tray'
• The 
upper output:
- 'Top
 Delivery Tray (TDT)' - 'Integrated Receiving Tray'
Chapter 6
 - The Océ Publisher Copy option274'Advanced' / 'Finishing' settings
Downloaded From ManualsPrinter.com Manuals 
						

							Note:
Some media types (thick media) cannot be delivered to the 'Top Delivery Tray (TDT)'
or to the folder.
A media
 from a roll wider than 36 
inches cannot be delivered to the folder. Folded printout
When the 'Fold' option is available and selected, you can 
edit and manually select the
top 
of the folded packet.
The 
printout is automatically sent to the folder. The 'Delivery destination' is automati-
cally set
 to 'Folded delivery'
Note:
When the selected media and print settings do not allow the folded output to be delivered
with the legend on top of the folded packet, a warning message is displayed ('The legend
will 
not be on top of the folded packet.'). Depending on your printer and folder capabilities, set the fold options ('Fold type', 'Fold
method', 'Folded delivery', 'Change folded packet size', 'Binding strip'...)
When a

 combination of the settings generates conflicts, a message is displayed or the
combination is

 not available:
• 'The

 
values of Fold type and Folded delivery are not compatible.'
• 'Reinforcement and Binding strip are 
not compatible.': 'Binding strip' is available
only when
 
'Fold and reinforce' is not set
• 'Reinforcement
 can be performed only with the DIN Fold method.': 'Fold and rein-
force' is available only when the 'Fold method' is DIN and the 'Fold type' is 'Full
fold'
• The 

length of the folded packet can be changed only when the 'Fold type' is 'Full fold'
See 
‘Fold a job’  on page 276 to get more details on how to adjust the folding settings. For more information on the folding capabilities of your printer, refer to your 
printer
and folder documentation. Chapter 6
 - The Océ Publisher Copy option 275'Advanced' / 'Finishing' settings
Downloaded From ManualsPrinter.com Manuals 
						

							Fold a job
Introduction When folding is enabled, Océ ColorWave 600 
analyses the values set in the selected
template, the
 'Image Properties', the size and the 'Layout' information of each image to
define the

 orientation of the image on the media.
It 
displays a preview of the image in the 'Print Preview' to show:
• The
 
position of the image in the selected media
• The 
feed direction
• the part of the image that will 
be placed on top of the folded packet (in gray), when
folding
 is activated
The 

goal is to deliver a folded output that displays the legend on top of the folded packet.
Note:
Check the configuration of the default template for folding: set the default CAD or
reading 
orientation and activate the 'Automatic detection of the legend' (with adequate
timeout) in 
the template 'Image' settings. Adjust the settings for folding
In some cases, it occurs that 
the part of the image located on top of the folded packet
displayed in
 the preview does not match the legend position.
Fine 

tune some settings until you can see in the 'Print Preview' that the part of the image
shown as top 
of the folded packet contains the legend:
• In 'Image
 Properties' select the suitable 'Reading orientation'.
Select 'Add

 a 180 
degrees extra rotation' and adjust the position of the legend if
needed.
• If needed,
 in the 'Basic' settings, select a different 'Media size'.
Special 

cases The 
system displays an error message and prevents printing when:
• The 
selected media roll is wider than 36 inches ('The selected media size cannot be
folded.')
• The 
media type cannot be folded ('The selected media type cannot be folded.')
Chapter 6
 - The Océ Publisher Copy option276Fold a
 job
Downloaded From ManualsPrinter.com Manuals 
						

							The system displays a warning message but allows printing when:
• The 
selected media and print settings do not allow the delivery of the folded output
with 
the legend on top of the folded packet ('The legend will not be on top of the
folded packet.')
• The 
application could not find the legend ('Automatic detection of the legend': 'No
legend in
 file' 
or 'Timeout') Chapter 6
 - The Océ Publisher Copy option 277Fold a
 job
Downloaded From ManualsPrinter.com Manuals 
						

							Chapter 6 - The Océ Publisher Copy option278Fold a
 job
Downloaded From ManualsPrinter.com Manuals 
						

							Chapter 7
Manage media on the Océ
ColorWave 
600 printing
system
Downloaded From ManualsPrinter.com Manuals 
						

							Overview of the media related settings
Introduction
It is important to make sure that the media related settings of your system are set to
generate an
 optimal print result.
You can

 
set media related settings in the following places. #
Description
Media related settings
The Océ Express WebTools allow you to manage the media
profiles on the printer.
In 

the 'Support' - 'Media' tab you can download new media
profiles, upload media profiles to the 'Océ PowerM con-
troller' / 'Océ

 PowerM Plus controller ' and enable the
media that

 
must be available on your printer operator
panel.
(see 
‘Manage the media profiles’  
on page 284)
in
 
the Océ Express
WebTools
You
 can use the printer operator panel to define the correct
media type for the media that you 
load on your printer.
For
 each media roll you can 
select one of the media types
that 
you enabled in the Océ Express WebTools.
on the
 printer operator
panel
In your

 
print job submission application (Océ Windows ®
printer 
driver, Océ Publisher Express, Océ Publisher Select)
you can select a media type and media format for your print
job. You must select a media type that is available on your
printer. in the print job submis-
sion 
applications
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system280Overview of the media related settings
Downloaded From ManualsPrinter.com Manuals