Nortel Modular Ics 6.1 System Coordinator Guide

Making calls / 81
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Using a line pool to make a call
Use this process to make a line pool call:
1. Press ²ßÝ.
2. Enter a line pool access code or destination code.
If you have a free internal line, you can make a call using a line 
pool without entering the feature code first.
1. Select an internal line (intercom).
2. Dial the line pool access code or destination code.
Programming a memory button with a line pool
When you program a button with the line...

82 / Making calls
Modular ICS 6.1 System Coordinator Guide P0603535  02
Making calls from an ISDN terminal
ISDN terminals do not have line keys or intercom keys as do 
Norstar telephones. To make an outgoing call from an ISDN 
terminal, access an external line by entering a line pool code 
or by using the ARS feature.
Changing how you dial your calls
To change how how you dial your calls, use this feature:
1. Press ²¥¡Û.
2. Press £ or NEXT
 until the dialing mode you want appears.
3. Press ³ or OK
 to...

Making calls / 83
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Automatic dial does not work if your telephone has no prime 
line or if your prime line is in use.
Telephones connected to an analog terminal adapter (ATA) 
cannot use Automatic dial.
Using Pre-dial
Pre-dial allows you to enter a telephone number, check it, then 
change it before actually making the call. The call is not dialed 
until you select a line or line pool, or pick up the receiver. You 
can pre-dial both external and...

84 / Making calls
Modular ICS 6.1 System Coordinator Guide P0603535  02
Making a priority call
1. Press ²ßá. 
2. Wait for a connection, then speak.
A person who receives a priority call while on another call has 
eight seconds to accept or block the call. For information about 
blocking calls, see Stopping calls from ringing at your 
telephone: Do Not Disturb (DND) on page 200. If the person 
does nothing, the priority call feature puts their active call, 
including conference parties, on Exclusive Hold...

Making calls / 85
P0603535  02 Modular ICS 6.1 System Coordinator Guide
6. Press CHANGE to choose Y (Yes) or N (No)
Displays
You can make a priority call only while your telephone 
displays:
Using Ring Again
Use Ring Again when you call someone on your Norstar 
system and their telephone is busy or there is no answer. Ring 
Again can tell you when they hang up or next use their 
telephone. You can use Ring Again to tell you when a busy 
line pool becomes available.
You tried to place a priority call to...

86 / Making calls
Modular ICS 6.1 System Coordinator Guide P0603535  02
Turning on Ring Again
1. Press ²Û before you hang up. 
Using Ring Again cancels any previous Ring Again requests 
at your telephone.
Canceling Ring Again
1. Press ²£Û to cancel a Ring Again request.
Displays
You cannot use Ring Again on your current 
call. You can only use Ring Again while you 
have a busy signal on an internal call or  line 
pool request, or while an internal call is 
ringing.
Press YES to use Ring Again. Press NO...

P0603535  02 Modular ICS 6.1 System Coordinator Guide
Time savers for making calls
Storing a number on a memory button for 
Autodial
You can program memory buttons for one-touch dialing of 
internal or external telephone numbers. 
Buttons used for lines, answer DNs, or handsfree/mute cannot 
be used as autodial buttons.
If the power to your Norstar system is off for more than three 
days, autodial numbers, and some other system programming, 
may be lost from the memory.
Adding an autodial button
Use...

88 / Time savers for making calls
Modular ICS 6.1 System Coordinator Guide P0603535  02
Choosing a line for Autodial
To include a line selection for an external number, press the 
line or intercom button before you enter the number. To select 
a line pool, press a programmed line pool button, or press the 
button labeled Intercom and enter a line pool access code.
If you select a line before pressing the autodial button, the call 
goes out on the line you have selected instead of the line that 
is part...

Time savers for making calls / 89
P0603535  02 Modular ICS 6.1 System Coordinator Guide
While programming external Autodial, you 
erased the button by pressing 
³ or OK 
before entering any digits.
Enter the number you want to program. 
Choose the line first, if necessary, then enter 
the number exactly as if you were making a 
call.
Enter the internal telephone number you 
want to program.
You are programming an internal autodial 
button and have entered a number that is not 
an internal number on your...

90 / Time savers for making calls
Modular ICS 6.1 System Coordinator Guide P0603535  02
Using Last Number Redial
Press ²Þ to redial the last external number you dialed.
Last Number Redial records a maximum of 24 digits.
Preventing a telephone from using Last 
Number Redial
Last Number Redial can be restricted at individual telephones.
You need the programming template found at the front of this 
guide. See 
A map for using programming on page 23 for more 
information.
1. Press ²¥¥ÛßßÜÝÝ.
2. Press ÛÜßÝß...