NEC PX 60XM5 User Manual

							En-20
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET OSM ANGLE “V”REFERENCE
 OPTION2 PWR. MGT. OFF←→ONYES NO En-26
CINEMA MODE OFF←→ONYES NO En-26
LONG LIFE PLE AUTO/LOCK 1/LOCK 2/LOCK 3 YES NO En-26
ORBITER AUTO 1 YES NO En-27
AUTO 2 YES NO En-27
MANUAL H-DOT/V-LINE/TIME YES NO En-27
OFF YES NO En-27
INVERSE OFF YES NO En-27
ON WORKING TIME/WAITING TIME YES NO En-27
WHITE YES NO En-27
SCREEN WIPER OFF YES NO En-28
ON WORKING TIME/WAITING TIME/SPEED YES NO En-28
SOFT FOCUS OFF/1/2/3/4 YES NO En-28
GRAY LEVEL 0←…
→3←…
→15 YES NO En-28
S1/S2 AUTO←→OFFYES NO En-28
PICTURE SIZE*
3OFF←→ONYES NO En-29
DVI SET UP PLUG/PLAY PC←→STB/DVD NO NO En-29
BLACK LEVEL LOW←→HIGH NO NO En-29
PROTOCOL SET OFF←→ONYES NO En-29
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET OSM ANGLE “V”REFERENCE
 OPTION3 TIMER PRESENT TIME SUMMER TIME OFF←→ON NO NO En-29
DAY/HOUR/MINUTES NO NO En-29
TIMER OFF YES NO En-30
PROGRAM DAY/ON/OFF(HOUR, MINUTES)/INPUT/FUNC. YES NO En-30
REPEAT SINGLE/MULTI/VIDEO-W YES NO En-30
PWR. ON MODE INPUT LAST /MULTI/ VIDEO 1-3 / DVD/HD 1-3 / RGB 1-3 YES NO En-31
VOLUME LAST←→0←…
→42 YES NO En-31
CONTROL  LOCK OFF←→ONYES NO En-31
IR REMOTE OFF←→ONYES NO En-32
LOOP OUT OFF←→ONYES NO En-32
REMOTE ID ALL←→1←…
→4 NO NO En-32
ID NUMBER ALL←→1←…
→256 YES NO En-32
VIDEO WALL DIVIDER OFF/1/22/33/44/55/51/15 YES NO En-33
POSITION
No.1←…
→No.4/No.7←…
→No.15/No.16←…
→No.31/No.32←…
→No.56—NO En-33
DISP. MODE SPLIT←→BLANK YES NO En-33
AUTO ID OFF←→ON YES NO En-33
IMAGE ADJUST ASPECT MODE
NORMAL/FULL/STADIUM/ZOOM/2.35:1/14:9/UNDERSCAN/TRUE*3—NO En-34
V-POSITION/H-POSITION/V-HEIGHT/H-WIDTH/AUTO PICTURE/
FINE PICTURE*
1/PICTURE ADJ.*1/UNDERSCAN
P. ON DELAY OFF/ON/MODE1/MODE2 YES NO En-34
PLE LINK OFF←→ON YES NO En-34
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET OSM ANGLE “V”REFERENCE
 OPTION4 SUB. PICTURE SUB. P DETECT OFF←→AUTO YES NO En-35
SUB. P RATE 20%←…
→100% YES NO En-35
DISPLAY FADE←→NORMAL YES NO En-35
ZOOM NAV OFF←→S BY S←→BTM LFT←→BTM RGT←→TOP RGT←→TOP LFT YES NO En-35
PIC FREEZE OFF←→S BY S1←→S BY S2←→BTM LFT←→BTM RGT←→TOP RGT←→TOP LFT YES NO En-35
SEAMLESS SW OFFYES NO En-36
ON SELECT1/SELECT2 YES NO En-36
TEXT INSERT OFF/BOTTOM-1/BOTTOM-2/BOTTOM-3/MID. LOW/MID. HIGH/TOP-3/TOP-2/TOP-1/LEFT/RIGHT YES NO En-36
INPUT/SUB. P DETECT/PIC. RATE/DISPLAY YES NO En-36
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET OSM ANGLE “V”REFERENCE
ADVANCED OSM OFF←→ONYES NO En-37
LANGUAGE ENGLISH/DEUTSCH/FRANÇAIS/ESPAÑOL/ITALIANO/SVENSKA/
У/
EΛΛHNIKA/PORTUGUÊS/TÜRKÇENO NO En-37
COLOR SYSTEM AUTO/3.58 NTSC/4.43 NTSC/PAL/PAL 60/PAL-N/PAL-M/SECAM NO YES En-37
SOURCE INFORMATION——YES En-37
*1 Only when AUTO PICTURE is OFF.
*2 RGB only.
*3“PICTURE SIZE” and “TRUE” are only for 50 and 60 inch types.
*4“LOW TONE” is only for 50 inch type.
Information
 Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
 
						

							En-21
Picture Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
On “CONTRAST” of “PICTURE” menu, adjust the contrast.
SEL. ADJ. RETURN
PICTURE 1 / 2
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
      NEXT PAGE
:   NORMAL
:   OFF
: 52
: 32
: 16
: 32
: 32
G R
EXIT:
 52CONTRAST
Note: If “CAN NOT ADJUST” appears ...
When trying to enter the PICTURE submenu, make sure
PICTURE MODE is not set to DEFAULT.
Information

 Picture adjustment screen
CONTRAST: Changes the picture’s white level.
BRIGHTNESS: Changes the picture’s black level.
SHARPNESS: Changes the picture’s sharpness.
Adjusts picture detail of VIDEO display.
COLOR: Changes the color density.
TINT: Changes the picture’s tint. Adjust for natural
colored skin, background, etc.

 Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.

 Restoring the factory default settings
Select “DEFAULT” under the “PICTURE MODE”
settings.
Setting the picture mode according to the
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Example: Setting the “THEAT. 1” mode
On “PICTURE MODE” of “PICTURE” menu, select
“THEAT. 1”.
SEL. ADJ. RETURN
PICTURE 1 / 2
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
      NEXT PAGE
:   NORMAL
:   OFF
: 52
: 32
: 16
: 32
: 32
G R
EXITPICTURE MODE:
     THEAT. 1
Reducing noise in the picture
Use these settings if the picture has noise due to poor
reception or when playing video tapes on which the picture
quality is poor.
Example: Setting “NR-3”
On “NR” of “PICTURE” menu, select “NR-3”.
SEL. ADJ. RETURN
PICTURE1 / 2: 52
: 32
: 16
: 32
: 32
G R
EXIT
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
      NEXT PAGE:   NORMAL
:   OFF
NR:
     NR-3
Information

 NR
* “NR” stands for Noise Reduction.
* This function reduces noise in the picture.

 Types of noise reduction
There are three types of noise reduction. Each has a
different level of noise reduction.
The effect becomes stronger as the number increases
(in the order NR-1 → NR-2 → NR-3).
OFF: Turns the noise reduction function off.
Setting the color temperature
Use this procedure to set color tone produced by the plasma
display.
Example: Setting “HIGH”
On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”.
SEL. ADJ. RETURN
PICTURE 2 / 2
EXIT
      PREVIOUS PAGE
COLOR TEMP.
GAMMA
LOW TONE
COLOR TUNE:   HIGH
:   2
:   MODE1
Information

 Setting the color temperature
LOW: More red
MID LOW: Slightly red
MID: Standard (slightly bluer)
HIGH: More blue
Information

 Types of picture modes
THEAT. 1, 2: Set this mode when watching video in a
dark room.
This mode provides darker, finer pictures, like the
screen in movie theaters.
For a darker image, select THEAT. 2.
NORMAL: Set this mode when watching video in a
bright room.
BRIGHT: This mode provides brighter pictures than
NORMAL.
This mode provides dynamic pictures with distinct
differences between light and dark sections.
DEFAULT: Use this to reset the picture to the factory
default settings.
 
						

							En-22
Adjusting the color to the desired level
Use this procedure to adjust the white balance for each
color temperature to achieve the desired color quality.
Example: Adjusting  the “GAIN RED” of “HIGH” color
temperature
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”,
then press the  MENU/ENTER button.
The “WHITE BALANCE” screen appears.
On “GAIN RED”, adjust the white balance.
SEL. ADJ. RETURN
WHITE BALANCE
COLOR TEMP. HIGH
GAIN RED
GAIN GREEN
GAIN BLUE
BIAS RED
BIAS GREEN
BIAS BLUE
RESET
:   OFF
: 40
: 40
: 40
: 40
: 40
: 40
EXIT:
 70GAIN RED
Information

 Adjusting the white balance
GAIN R/G/B: White balance adjustment for white level.
BIAS R/G/B: White balance adjustment for black level.
RESET: Resets settings to the factory default values.
Use  
 and  buttons to select “ON”, then press the
MENU/ENTER button.

 Restoring the factory default settings
Select “RESET” under the WHITE BALANCE menu.
Changing the Gamma Curve
This feature adjusts the brightness of the midtone areas
while keeping shadows and highlights unchanged.
Example: Setting “3”
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
On “GAMMA” of “PICTURE” menu, select “3”.
SEL. ADJ. RETURN
PICTURE 2 / 2
EXIT
      PREVIOUS PAGE
COLOR TEMP.
GAMMA
LOW TONE
COLOR TUNE:   MID
:   3
:   MODE1
Information

 GAMMA settings
The picture becomes darker as the number increases
(in the sequence of 1, 2, 3, 4).
Making the Low Tone adjustments
You can select the tone reproduction from 2 modes.
This function is effective especially for dark images.
* This function is available only for 50 inch type.
Example: Setting “MODE2”
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
On “LOW TONE” of “PICTURE” menu, select “MODE2”.
SEL. ADJ. RETURN
PICTURE 2 / 2
EXIT
      PREVIOUS PAGE
COLOR TEMP.
GAMMA
LOW TONE
COLOR TUNE:   MID
:   2
:   MODE2
Adjusting the colors
Use this procedure to adjust hue and color density for red,
green, blue, yellow, magenta and cyan without changing
the white point.
You can accentuate the green color of trees, the blue of
the sky, etc.
Example: Adjusting the color tune for blue
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
On “PICTURE” menu, select “COLOR TUNE”, then press
the MENU/ENTER button.
The “COLOR TUNE” screen appears.
On “BLUE” of “COLOR TUNE”, adjust the color tune.
SEL. ADJ. RETURN
COLOR TUNE
RED
GREEN
BLUE
YELLOW
MAGENTA
CYAN
RESET: 32
: 32
: 32
: 32
: 32
: 32
EXIT
BRRGCMYCMY
G B:   OFF
Information

 COLOR TUNE settings
RED: Adjusts hue of Red
GREEN: Adjusts hue of Green
BLUE: Adjusts hue of Blue
YELLOW: Adjusts hue of Yellow
MAGENTA: Adjusts hue of Magenta
CYAN: Adjusts hue of Cyan
RESET: Resets settings to the factory default value.
Use 
  and  buttons to select “ON”, then press the
MENU/ENTER button.
 
						

							En-23
Audio Settings Menu
Adjusting the treble, bass and left/right
balance and audio input select
The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting  the  bass
On “BASS” of “AUDIO” menu, adjust the bass.
SEL. ADJ. RETURN
AUDIO
BASS
TREBLE
BALANCE
AUDIO INPUT 1
AUDIO INPUT 2
AUDIO INPUT 3
:   VIDEO1
:   DVD/HD1
:   RGB1
: 26
: 13
: ±
0
EXIT
RL
Note : If “CAN NOT ADJUST” appears...
Set “AUDIO INPUT” on the AUDIO menu correctly.
Information

 Audio settings menu
BASS: Controls the level of low frequency sound.
TREBLE: Controls the level of high frequency sound.
BALANCE: Controls the balance of the left and right
channels.
Setting the allocation of the audio connectors
Setting the AUDIO 1, 2, and 3 connectors to the desired
input.
Example: Setting “AUDIO INPUT1” to “VIDEO2”
On “AUDIO INPUT1” of “AUDIO” menu, select
“VIDEO2”.
The available sources depend on the settings of input.
SEL. ADJ. RETURNEXIT
AUDIO
BASS
TREBLE
BALANCE
AUDIO INPUT 1
AUDIO INPUT 2
AUDIO INPUT 3:   VIDEO2
:   DVD/HD1
:   RGB1: 13
: 13
: ±
0
RL
Information

 AUDIO INPUT
A single audio input cannot be selected as the audio
channel for more than one input terminal.
Image Adjust Settings Menu
Adjusting the Position, Size, Fine Picture,
Picture Adj and Underscan
The position of the image can be adjusted and flickering
of the image can be corrected.
Example: Adjusting the vertical position in the normal
mode
On “V-POSITION” of “IMAGE ADJUST” menu, adjust the
position.
The mode switches as follows each time the 
 or  button is
pressed:
NORMAL ↔ FULL
* The mode can also be switched by pressing the WIDE
button on the remote control.
* The settings on the IMAGE ADJUST menu are not preset
at the factory.
SEL. ADJ. RETURN
IMAGE ADJUST
ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
UNDERSCAN:   NORMAL
:   OFF
:   OFF: ±
0
: ±
0
:   0
:   0 
:   0 
:   0
EXIT:
 +
64V-POSITION
Information

 When “AUTO PICTURE” is “OFF”
SEL. ADJ. RETURN
IMAGE ADJUST
ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
UNDERSCAN:   FULL
:   OFF
:   OFF: ±
0
: ±
0
: 32
: 32 
: 32 
: 32
EXIT
When Auto Picture is off, the Fine Picture and the
Picture ADJ. items are displayed so that you can adjust
them.

 Adjusting the Auto Picture
ON: The Picture ADJ., Fine Picture and Position
adjustments are made automatically.
Not available for digital ZOOM.
OFF: The Picture ADJ., Fine Picture  and Position
adjustments are made manually.
* If FINE PICTURE can’t be adjusted, set Auto Picture
to OFF and adjust manually.

 Adjusting the position of the image
V-POSITION: Adjusts the vertical position of the
image.
H-POSITION: Adjusts the horizontal position of the
image.
V-HEIGHT: Adjusts the vertical size of the image.
(Not available for STADIUM mode)
H-WIDTH: Adjusts the horizontal size of the image.
(Not available for STADIUM mode)
FINE PICTURE*: Adjusts for flickering.
PICTURE ADJ.*: Adjusts for striped patterns on the
image (i.e. vertical banding).
* The Picture ADJ. and Fine Picture features are available
only when the “Auto Picture” is off.
* The AUTO PICTURE, FINE PICTURE and PICTURE
ADJ. are available only for RGB signals.
But, these features are not available for moving pictures
on VIDEO, DVD/HD or RGB.

 Setting the Underscan
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
ON: UNDERSCAN can be selected in ASPECT
MODE.
OFF: UNDERSCAN cannot be selected in ASPECT
MODE.
* Selectable only when video signal is input.
 
						

							En-24
Option1 Settings Menu
Setting the on-screen menu
This sets the position of the menu, the display format
(horizontal or vertical) etc.
Example: Turning the DISPLAY OSM off
On “OPTION1” menu, select “OSM”, then press the MENU/
ENTER button.
The “OSM” menu appears.
On “DISPLAY OSM” of “OSM” menu, select “OFF”.
SEL. ADJ. RETURN
OSM
EXIT
DISPLAY OSM
OSM ADJ.
OSM ANGLE
OSM ORBITER
OSM CONTRAST:   OFF
:   1
:   H
:   OFF 
:   LOW
Information

 DISPLAY OSM settings
ON: The informations on screen size, volume control,
etc. will be shown.
OFF: The informations on screen size, volume control,
etc. will not be shown.
The DISPLAY button on the remote control will not
function either.

 OSM ADJUST settings
Adjusts the position of the menu when it appears on the screen.
The position can be set between 1 to 6.

 OSM ANGLE settings
Sets the display format (landscape “H” or portrait “V”).
When the unit is installed vertically set the OSM
ANGLE at “V”.
“H”“V”
SEL. RETURN
OPTION 1 1 / 4
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
      NEXT PAGE:   RGB 
:   RGB 
:   AUTO
:   1080B
:   OFF
:   OFF
EXIT
MENU/ENTEROK
* The menu language for “V” is English only.
* Some menu items including LONG LIFE mode will
not be displayed with “V”, but can be performed by
setting with “H” (See pages 19 and 20 for the menu
items that can be displayed with “V”).

 OSM ORBITER settings
ON: The position of the menu will be shifted by eight
dots each time OSM is displayed.
OFF: OSM will be displayed at the same position.

 OSM CONTRAST settings
NORMAL: OSM brightness is set to normal.
LOW: OSM brightness is set to lower.
:   RGB
:   RGB
:   AUTO
:   1080B
:   OFF
:   OFF
      1024768
EXITSEL.
RETURNMENU/ENTEROK
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
Setting the BNC input connector type
Select whether to set the input of the 5 BNC connectors to
RGB, Component or SCART1,2.
Example: Set the “BNC INPUT” mode to “COMP.”
On “BNC INPUT” of “OPTION1” menu, select “COMP.”.
SEL. ADJ. RETURN
OPTION 1 1 / 4
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
              :   AUTO
HD SELECT
INPUT SKIP
ALL RESET
      NEXT PAGE:   COMP. 
:   RGB 
:   1080B
:   OFF
:   OFF
EXIT
Information

 BNC INPUT Settings
RGB: Use the 5BNC terminals for RGB input.
COMP.: Use the 3BNC terminals for component input.
SCART1: Use the 4BNC terminals for RGB with
composite sync. See page En-9.
SCART2: Use the 3BNC terminals for RGB and the
VIDEO1 terminal for composite sync. See page En-9.
Setting the RGB1 connector
Select one of the signals being transmitted to the RGB1
terminal.
Example: Set the “D-SUB INPUT” mode to “SCART3”
On “D-SUB INPUT” of “OPTION1” menu, select
“SCART3”.
OPTION 1 1 / 4
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
              :   AUTO
HD SELECT
INPUT SKIP
ALL RESET
      NEXT PAGE
:   RGB 
:   SCART3 
:   1080B
:   OFF
:   OFF
SEL. ADJ. RETURNEXIT
Information

 D-SUB INPUT Settings
RGB: Use the D-SUB terminal for RGB input.
SCART3: Use the D-SUB terminal for RGB signal fed
from SCART. See page En-9.
 
						

							En-25
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the “HD SELECT” mode to “1035I”
On “HD SELECT” of “OPTION1” menu, select “1035I”.
SEL. ADJ. RETURN
OPTION 1 1 / 4
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
              :   AUTO
HD SELECT
INPUT SKIP
ALL RESET
      NEXT PAGE:   RGB 
:   RGB 
:   1035
I:   OFF
:   OFF
EXIT
Information

 HD SELECT modes
These 3 modes are not displayed in correct image
automatically.
1080B: Standard digital broadcasts
1035I: Japanese “High Vision” signal format
1080A: Special Digital broadcasts (for example :
DTC100)
Setting the Input Skip
When this is ON, signals which are not present will be
skipped over and only pictures whose signals are being
transmitted will be displayed.
This setting is valid only for the INPUT SELECT button
on the unit.
Example: Set to “ON”
On “INPUT SKIP” of “OPTION1” menu, select “ON”.
SEL. ADJ. RETURN
OPTION 1 1 / 4
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
              :   AUTO
HD SELECT
INPUT SKIP
ALL RESET
      NEXT PAGE:   RGB 
:   RGB 
:   1080B
:   ON
:   OFF
EXIT
Information

 INPUT SKIP settings
OFF: Regardless of the presence of the signal, scan
and display all signals.
ON: If no input signal is present, skip that signal.
*“SETTING NOW” will appear during the input search.
Resetting to the default values
Use these operations to restore all the settings (PICTURE,
AUDIO, IMAGE  ADJUST, OPTION1~4, etc.) to the
factory default values.
Refer to page En-19 for items to be reset.
On “ALL RESET” of “OPTION1” menu, select “ON”, then
press the MENU/ENTER button.
SEL. RETURN
OPTION 1 1 / 4
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
              :   AUTO
HD SELECT
INPUT SKIP
ALL RESET
      NEXT PAGE:   RGB 
:   RGB 
:   1080B
:   OFF
:   ON
EXIT
MENU/ENTEROK
ALL RESET
SETTING NOW
When the “SETTING NOW” screen disappears, then all the
settings are restored to the default values.
Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the “RGB SELECT” mode to
“852480 ”
On “RGB SELECT” of “OPTION1” menu, select
“852480”.
SEL. ADJ. RETURN
OPTION 1 1 / 4
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
              :   852480
HD SELECT
INPUT SKIP
ALL RESET
      NEXT PAGE:   RGB 
:   RGB 
:   1080B
:   OFF
:   OFF
EXIT
Information

 RGB SELECT modes
AUTO: Select the suitable mode for the specifications
of input signals as listed in the table “Computer input
signals supported by this system” on page En-41.
The others: The available resolutions are shown.
See page En-41 for the details of the above settings.
 
						

							En-26
Option2 Settings Menu
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
Setting the power management for computer
images
This energy-saving (power management) function
automatically reduces the monitor’s power consumption
if no operation is performed for a certain amount of time.
Example: 
Turning the power management function on
On “PWR. MGT.” of “OPTION2” menu, select “ON”.
SEL. ADJ. RETURN
OPTION 2 2 / 4
      PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET 
      NEXT PAGE:   ON 
:   ON 
:   3
:   OFF
:   ON
:   OFF
EXIT
Information

 Power management function
* The power management function automatically reduces
the monitor’s power consumption if the computer’s
keyboard or mouse is not operated for a certain amount
of time. This function can be used when using the
monitor with a computer.
* If the computer’s power is not turned on or if the
computer and selector tuner are not properly connected,
the system is set to the off state.
* For instructions on using the computer’s power
management function, refer to the computer’s operating
instructions.

 Power management settings
ON: In this mode the power management function is
turned on.
OFF: In this mode the power management function is
turned off.

Power management function and POWER/
STANDBY indicator
The POWER/STANDBY indicator indicates the status
of the power management function. See below for
indicator status and description.
POWER/STANDBY indicator
Setting the picture to suit the movie
The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60 Hz), 525I (60 Hz), 576I
(50 Hz), 625I (50 Hz), 1035I (60 Hz), 1080I (60 Hz) only]
Example: Setting the “CINEMA MODE” to “OFF”
On “CINEMA MODE” of “OPTION2” menu, select “OFF”.
SEL. ADJ. RETURNEXIT
OPTION 2 2 / 4
      PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET 
      NEXT PAGE
:   OFF 
:   OFF 
:   3
:   OFF
:   ON
:   OFF
Information

 CINEMA MODE
ON: Automatic discrimination of the image and
projection in cinema mode.
OFF: Cinema mode does not function.
Power
management
mode
On
OffTurning the picture
back on
Picture already on.
Operate the keyboard or
mouse. The picture
reappears. POWER/
STANDBY
indicator
Green
RedPower
management
operating status
Not activated.
Activated. Description
Horizontal and vertical
synchronizing signals
are present from the
computer.
Horizontal and/or
vertical synchronizing
signals are not sent
from the computer.
Reducing image retention
The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce image retention.
On “OPTION2” menu, select “LONG LIFE”, then press the
MENU/ENTER button.
The “LONG LIFE” screen appears.
SEL. ADJ. RETURNEXIT
LONG LIFEPLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:   AUTO
:   AUTO1 
:   OFF
:   OFF
:   OFF
PLE (Peak Luminance Enhancement)
Use this to activate the brightness limiter.
Example: Setting “PLE” to “LOCK1”
On “PLE” of “LONG LIFE” menu, select “LOCK1”.
SEL. ADJ. RETURNEXIT
LONG LIFEPLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:   LOCK1
:   AUTO1 
:   OFF
:   OFF
:   OFF
Information

 PLE settings
AUTO: The brightness of the screen is adjusted
automatically to suit the picture quality.
LOCK1, 2, 3: Sets maximum brightness.
The brightness level decreases in the order  of LOCK
1, 2, 3. LOCK 3 provides minimum brightness.
 
						

							En-27
ORBITER
Use this to set the picture shift.
Example: Setting “ORBITER” to “AUTO2”
On “ORBITER” of “LONG LIFE” menu, select “AUTO2”.
SEL. ADJ. RETURNEXIT
LONG LIFEPLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:   AUTO
:   AUTO2 
:   OFF
:   OFF
:   OFF
Information

 ORBITER settings
OFF: Orbiter mode does not function.
This is the default setting when RGB is input.
AUTO1: The picture moves around the screen
intermittently, making the picture smaller. This is the
default setting when a Video or a DVD/HD/DTV signal
is input. Set to “OFF” when these signals are not used.
AUTO2: The picture moves around the screen
intermittently, making the picture bigger.
MANUAL: User can adjust the orbiter function
(Horizontal Dot, Vertical Line and Time) manually.
See the following explanation.
* When a Video or a DVD/HD/DTV signal is input, the
AUTO1 and 2 functions will affect only the moving
picture and will not make the screen smaller or bigger.
Adjust the ORBITER function manually
Set the amount of shift and the time between movement.
Example: Setting so that the picture moves 2 dots
horizontally and 4 lines vertically every 3 minutes.
On “ORBITER” of “LONG LIFE” menu, select
“MANUAL”, then press the MENU/ENTER button.
THE “ORBITER” screen appears.
Adjust the items.
SEL. ADJ. RETURN
ORBITER
EXIT
H-DOT
V-LINE
TIME:   2 DOT
:   4 LINE 
:   3 M
Information

 ORBITER Function settings
H-DOT: Moves from 1 dot to 20 dots in the horizontal
direction.
V-LINE: Moves from 1 line to 20 lines in the vertical
direction.
TIME:Interval of 1 minute to 5 minutes (1 horizontal
dot or 1 vertical line per interval).
INVERSE
Use this to set the inverse mode or to display a white
screen.
Example: Setting “INVERSE” to “WHITE”
On “INVERSE” of “LONG LIFE” menu, select “WHITE”.
SEL. ADJ. RETURNEXIT
LONG LIFEPLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:   AUTO
:   AUTO1 
:   WHITE
:   OFF
:   OFF
Information

 INVERSE Settings
ON: The picture is displayed alternately between
positive image and negative image.
You can set the time by pressing the MENU/ENTER
button while “ON” is set.
OFF: Inverse mode does not function.
WHITE: The entire screen turns white.
You can set the time by pressing the MENU/ENTER
button while “ON” is set.
Setting the time for INVERSE/WHITE
Set a time duration.
Example: Setting to that the INVERSE mode starts
in 2 hours and proceeds for one hour and a half.
On “INVERSE” of “LONG LIFE” menu, select “ON”, then
press the MENU/ENTER button.
THE “INVERSE/WHITE” screen appears.
Adjust the times.
SEL. ADJ. RETURN
INVERSE/WHITE
EXIT
WORKING TIME
WAITING TIME:   01H30M
:   02H00M
Information

 Setting the time
WORKING TIME: Set the time duration for
“INVERSE/WHITE”.
When the WORKING TIME is set to “ON” the mode
will stay on.
WAITING TIME: Set the standby time until the
“INVERSE/WHITE” mode starts.
* The “WAITING TIME” can not be set when the
“WORKING TIME” is ON.
*
THE “WORKING TIME” and “WAITING TIME” can be
set for up to 12 hours and 45 minutes in units of 3 minutes.
* Ending a WORKING TIME function, the monitor will
go to STANDBY.
[Example]
WORKING TIME: 01H30M
WAITING TIME: 02H00M

 To select “ON” for the “WORKING TIME”...
Set the hours of the working time to 0H and the minutes
to 0M. “ON” will be displayed.
←−−−−      2  H        −−−−→←−−    1.5 H   −−→←−−−−Start INVERSE/WHITE Start STANDBY
 
						

							En-28
SCREEN WIPER
When this is set to ON, a white vertical bar moves
repeatedly from the left and of the screen to the right end
at a constant speed.
Example: Setting “SCREEN WIPER” to “ON”
On “SCREEN WIPER” of “LONG LIFE” menu, select
“ON”.
SEL. ADJ. RETURNEXIT
LONG LIFEPLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:   AUTO
:   AUTO1 
:   OFF
:   ON
:   OFF
Information

 SCREEN WIPER
ON: The white vertical bar appears.
You can set the time by pressing the MENU/ENTER
button while “ON” is set.
OFF: Screen wiper mode does not function.
Setting the time for SCREEN WIPER
Set a time duration and the speed.
Example: Setting so that the SCREEN WIPER mode
starts in 30 minutes and proceeds for one and a half
hours.
On “SCREEN WIPER” of “LONG LIFE” menu, select
“ON”, then press the MENU/ENTER button.
THE “SCREEN WIPER” screen appears.
Adjust the times and speed.
SEL. ADJ. RETURN
SCREEN WIPER
EXIT
WORKING TIME
WAITING TIME
SPEED:   01H30M
:   00H30M
:   3
Information

 Setting the time
WORKING TIME: Set the time duration for “SCREEN
WIPER”.
When the WORKING TIME is set to “ON” the mode
will stay on.
WAITING TIME: Set the standby time until the
“SCREEN WIPER” mode starts.
SPEED: Set the moving speed for the  “SCREEN
WIPER”. The speed decreases as the number increases.
* The “WAITING TIME” can not be set when the
“WORKING TIME” is ON.
* THE “WORKING TIME” and “WAITING TIME” can
be set for up to 12 hours and 45 minutes in units of 3
minutes.

 To select “ON” for the “WORKING TIME”...
Set the hours of the working time to 0H and the minutes
to 0M. “ON” will be displayed.
SOFT FOCUS
Reduces edges and softens the image.
Example: Setting “SOFT FOCUS” to “2”
On “SOFT FOCUS” of “LONG LIFE” menu, select “2”.
SEL. ADJ. RETURNEXIT
LONG LIFEPLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:   AUTO
:   AUTO1 
:   OFF
:   OFF
:    2
Information

 SOFT FOCUS settings
OFF: Turns the SOFT FOCUS function off.
1, 2, 3, 4: Activates the SOFT FOCUS setting. The
higher numbers create a softer image.
“SHARPNESS” can not be adjusted  in the “PICTURE”
menu.
Setting the gray level for the sides of the screen
Use this procedure to set the gray level for the parts on the
screen on which nothing is displayed when the screen is
set to the 4:3 size.
Example: Setting “GRAY LEVEL” to “5”
On “GRAY LEVEL” of “OPTION2” menu, select “5”.
SEL. ADJ. RETURNEXIT
OPTION 2 2 / 4
      PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET 
      NEXT PAGE
:   OFF 
:   ON 
:   5
:   OFF
:   ON
:   OFF
Information

 GRAY LEVEL settings
This adjusts the brightness of the black (the gray level)
for the sides of the screen.
The standard is 0 (black). The level can be adjusted
from 0 to 15. The factory setting is 3 (dark gray).
Setting the screen size for S1/S2 video input
If the S-video signal contains screen size information, the
image will be automatically adjusted to fit the screen when
this S1/S2 is set to AUTO.
This feature is available only when an S-video signal is
input via the VIDEO3 terminal.
Example: Setting the “S1/S2” to “AUTO”
On “S1/S2” of “OPTION2” menu, select “AUTO”.
SEL. ADJ. RETURNEXIT
OPTION 2 2 / 4
      PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET 
      NEXT PAGE
:   OFF 
:   ON 
:   3
:   AUTO
:   ON
:   OFF
Information

 S1/S2 settings
AUTO: Adjusts the screen size automatically according
to the S1/S2 video signal.
OFF: Turns the S1/S2 function off.
 
						

							En-29
Setting the picture size for RGB input signals
Use this procedure to switch the setting to “ON” or “OFF”.
* This function is available only for 50 and 60 inch types.
Example: Setting the “PICTURE SIZE” mode to
“OFF”
On “PICTURE SIZE” of “OPTION2” menu, select “OFF”.
SEL. ADJ. RETURNEXIT
OPTION 2 2 / 4
      PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET 
      NEXT PAGE
:   OFF 
:   ON 
:   3
:   OFF
:   OFF
:   OFF
Setting the signal and black level for DVI signal
Choose the signal for the DVI connector (PC or STB/
DVD) and set the black level.
Example: Setting the “PLUG/PLAY” mode to “STB/
DVD”
On “OPTION2” menu, select “DVI SET UP”, then press the
MENU/ENTER button.
The “DVI SET UP” screen appears.
On “PLUG/PLAY” of “DVI SET UP” menu, select “STB/
DVD”.
SEL. ADJ. RETURN
DVI SET UP
EXIT
PLUG/PLAY
BLACK LEVEL:   STB/DVD
:   HIGH
Information

 PLUG/PLAY settings
PC: When connected to the PC signal.
BLACK LEVEL is set to “LOW” automatically.
STB/DVD: When connected to the SET TOP BOX,
DVD etc.
BLACK LEVEL is set to “HIGH” automatically.

 BLACK LEVEL settings
LOW: When connected to the PC signal.
HIGH: When connected to the SET TOP BOX, DVD
etc. Change “HIGH” into “LOW” if the black level
appears gray.
Option3 Settings Menu
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
Using the timer
This function sets the day of the week and time. You can
also set the program timer which turns on or off the power
at the day of the week, time and the input mode you want,
or repeat timer which displays two input modes alternately.
On “OPTION3” menu, select “TIMER”, then press the
MENU/ENTER button.
The “TIMER” screen appears.
SEL. RETURN
TIMER
PRESENT TIME
TIMER :   OFF
EXIT
MENU/ENTEROK
PRESENT TIME
This sets the day of the week and present time.
Example: Setting “WEDNESDAY”, “22:05”
On “TIMER” menu, select “PRESENT TIME”, then press
the MENU/ENTER button.
The “PRESENT TIME” screen appears.
Adjust the items.
SEL. ADJ. RETURN
PRESENT TIME
WEDNESDAY
22 : 05 : 00 RETURN
SUMMER TIME
SET:   OFF
EXIT
Select “SET”, then press the MENU/ENTER button.
The adjustments are stored and the TIMER menu reappears.
* If you press the EXIT button instead of the MENU/ENTER
button, the settings can not be made.
SEL. RETURN
PRESENT TIME
WEDNESDAY
22 : 05 : 00 RETURN
SUMMER TIME 
SET:   OFF
EXIT
MENU/ENTEROK
Information

 PRESENT TIME settings
SUMMER TIME: Use to set SUMMER TIME.
ON: The present time + 1 hour.
OFF: Cancelled
Day: Set the day of the week (e.g. Sunday).
Hour: Set the hour in the 24-hour format (range 00 to
23).
Minutes: Set the minutes (range 00 to 59).Setting the Protocol set
Use this setting when connecting a device which uses
special protocol for RS-232C communication.
Example: Setting “ON”
On “PROTOCOL SET” of “OPTION2” menu, select “ON”.
SEL. ADJ. RETURNEXIT
OPTION 2 2 / 4
      PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET 
      NEXT PAGE
:   OFF 
:   ON 
:   3
:   OFF
:   ON
:   ON
Information

 PROTOCOL SET settings
ON: When special protocol is used.
OFF: When NEC protocol is used (normal).
* Consult your dealer for details of protocol.