NEC Neax 2000 Ivs2 Isdn System Manual
Have a look at the manual NEC Neax 2000 Ivs2 Isdn System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NEAX2000 IVS2 ISDN System ManualPage 120 ND-70919 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming DESCRIPTION DATA Specify the number of digits to be received on DID. (1) (2)YY=09 Incoming Connection Signaling 00-63: B channel Trunk Route No. 08: ISDN Indial NOTE 1 NOTE 1:This data should be assigned to the B channel trunk route. For D channel trunk route, no data setting is required. (1) (2)YY=16 Hooking Signal Sending to outside 00-63: B channel Trunk Route No. 0: Not sending NOTE 1 (1) (2)YY=18 Digit conversion on DID call 00-63: B channel Trunk Route No. 0 : To provide 1 : Not provided NOTE 1 (1) (2)YY=28 Outgoing Trunk Queuing 00-63: B channel Trunk Route No. 0: Restricted NOTE 1 Determine trunk seizure sequence. (1) (2)YY=83 00-63: B channel Trunk Route No. 0: As per CM08>078 NOTE 1 NOTE 2:This data should be assigned to both B channel trunk route and D channel trunk route. (1) (2)YY=90 Assignment of BRT route for ISDN 00-63: B channel/D channel Trunk Route No. 2: ISDN-Basic Rate Interface NOTE 2 Select trunk seizure sequence. (1) (2)078 1 : Lowest available trunk Assign the Number Conversion Block number. (1) (2)YY=00 X-XXXX: DID No. 000-999: Number Conversion Block No. CM35 B CM08 CM76 C
CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming NEAX2000 IVS2 ISDN System Manual ND-70919 (E), Issue 1.0 Page 121 DESCRIPTION DATA When the data for CM35 YY=18 is set to “0” (Received digits conversion is to be provided), assign the data for interpreting the digits received. Terminate BRI trunks to a station for testing.• (1) (2)YY=01 Day Mode YY=02 Night Mode YY=03 Mode A YY=04 Mode B 000-999: Number Conversion Block No. assigned by CM76 Y=00 X-XXXXXXXX: Station No. to be terminated CM76 C END
NEAX2000 IVS2 ISDN System ManualPage 122 ND-70919 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming Home-Side Trunk Programming DESCRIPTION DATA Assign a trunk number to each channels on the Home-Side trunk. NOTE:The Virtual channel number on the Home-Side trunk must be an even number (00, 02, 04, ... 30). (1) (2)YY=05 3200-3230: Virtual channel No. 00-30 (Even No.) of the Home- Side Trunk D000-D255: Trunk No. Trunk No. already assignment by CM10 should not be used. Assign a trunk route number to each trunk. (1) (2)YY=00 000-255: Trunk No. 00-63: Trunk Route No. Assign trunk route data to the voice channels and common signaling channel of the Event Based CCIS route, as Tie Lines. (1) (2)YY=00 00-63: Trunk Route No. 04: Tie Line (1) (2)YY=01 00-63: Trunk Route No. 2: DP (1) (2)YY=04 00-63: Trunk Route No. 2: Answer signal arrives (1) (2)YY=09 00-63: Trunk Route No. 06: 2nd DT/Timing Start Determine trunk seizure sequence. (1) (2)YY=83 00-63: B channel Trunk Route No. 0: As per CM08>078 Provide the common signaling channel and voice channel route with No. 7 CCIS facilities. (1) (2)YY=90 00-63: Trunk Route No. 0: No. 7 CCISSTART CM07 A CM30 CM35 INITIAL
CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming NEAX2000 IVS2 ISDN System Manual ND-70919 (E), Issue 1.0 Page 123 DESCRIPTION DATA Assign a CCIS channel number to each common signaling channel and voice channel route. (1) (2)YY=91 00-63: Trunk Route No. 0-7: CCIS Channel No. Specify the voice channel and common signaling channel route as the Event Based CCIS route. (1) (2)YYY=135 00-63: Trunk Route No. 0: Event Based CCIS Route Select trunk seizure sequence. (1) (2)078 1 : Lowest available trunk Assign a Circuit Identification Code (CIC) number to each trunk used for voice channel. NOTE:CIC number represents a circuit number to designate a trunk (of each trunk route) used as a voice channel in the No. 7 CCIS network. Do not assign a CIC number to a trunk used as Common Signaling Channel. (1) (2)YY=35 000-255: Trunk No. 001-254: CIC No. CM08 A CM30 END CM35
NEAX2000 IVS2 ISDN System ManualPage 124 ND-70919 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming Mate-Side Trunk Programming DESCRIPTION DATA Assign a trunk number to each channel on the Mate-Side trunk. NOTE:The Virtual channel number on the Mate-Side Trunk must be an odd number (01, 03, 05, ... 31). (1) (2)YY=05 3201-3231: Virtual channel No. 01-31 (Odd No.) of the Mate-Side Trunk D000-D255: Trunk No. Assign a trunk route number to each trunk. (1) (2)YY=00 000-255: Trunk No. 00-63: Trunk Route No. Assign a trunk number, of the opposite office, sent to the network on Event Based CCIS connection. The trunk number is sent by the subaddress to activate the relation between the trunks used for Event Based CCIS. NOTE 1:CM30 YY=19 is not required when the trunk number is sent by ISDN Indial dialed-in digits. (CM35 YYY=143>1) NOTE 2:CM30 YY=19 must be an unique combination between the offices. (1) (2)YY=19 000-255: Trunk No. X-XXXX: Trunk No. of the opposite of- fice Assign trunk route data to the voice channels and common signaling channel of the Event Based CCIS route, as Tie Lines. (1) (2)YY=00 00-63: Trunk Route No. 04: Tie Line Assign the abbreviated codes for terminating number of the opposite office. The terminating number and its memory allocation should be assigned by CM71, CM72. (1) (2)YY=40 00-63: Trunk Route No. 00-31: Abbreviated Codes CM30 START CM07 A CM35 INITIAL
CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming NEAX2000 IVS2 ISDN System Manual ND-70919 (E), Issue 1.0 Page 125 DESCRIPTION DATA Specify the voice channel and common signaling channel route as the Event Based CCIS route.• (1) (2)YYY=135 00-63: Trunk Route No. 0: Event Based CCIS Route Specify which number is adopted for sending CCIS channel number of virtual trunks between the offices, either subaddress number or ISDN Indial dialed- in digits. (1) (2)YYY=143 00-63: Trunk Route No. 0: By Subaddress 1: By dialed-in digits Specify the Information Transfer Capability of the ISDN line used for Event Based CCIS. (1) (2)YYY=154 00-63: Trunk Route No. 5 : 3.1 kHz audio 6 : Speech 7 : Unrestricted digital information NOTE:Can’t be used if opposite PBX is a NEAX2400. CM35 A END
NEAX2000 IVS2 ISDN System ManualPage 126 ND-70919 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming • To provide Verification of Connection for Event Based CCIS, do the following programming. The following data must be set on the opposite PBX identically. See also the data setting example on the following pages. NOTE 1:This feature is available only for the connection between the NEAX2000 IVS 2/7400ICS M100MX’s. The same programming must be set on the opposite office. NOTE 2:This feature is available for installations consisting of PRI to PRI or PRI to BRI. Do not use for BRI to BRI. DESCRIPTION DATA Provide Verification of Connection to the Mate-Side trunk route for the voice channels and the common signaling channel.• (1) (2)YYY=152 00-63: Trunk Route No. of Mate-Side Trunk for voice channels and common signaling channel 0: To provide Assign the ISDN subscriber number of own office for the voice channel route and the common signaling channel route. This number is sent and verified with the number which is set by CM72 on the opposite office. (1) (2)YY=06 000-255: Trunk No. of Mate-Side Trunk for voice channels and common signaling channel X...XXX: Subscriber No. of ISDN line for voice channels and common signaling channel (Max. 16 digits) Assign the abbreviated codes for terminating number of the opposite office. The terminating number and its memory allocation should be assigned by CM71, CM72. (1) (2)YY=40 00-63: Trunk Route No. of Mate-Side Trunk for voice channels and common signaling channel 00-31 : Abbreviated Codes Assign the memory allocation to store the terminating number of the opposite office.(1) (2)66 XXX YYY XXX: 000-299: First Memory Slot No. YYY: 001-016: Number of Memory Slot allocated Set the stored number (terminating number of the opposite office: access code for ISDN line + ISDN subscriber number) to the Memory Slot number allocated by CM71. NOTE:The data set by CM35 YY=40, CM71>66, and CM72 is used to verify the terminating number sent from the opposite office. (1) (2)Y=0 000-299: Memory Slot No. Stored No. XXXX + , + YYY... XXXX: Access Code for ISDN YYY...: ISDN Subscriber No. of opposite office (Max. 16 digits)START CM35 CM35 CM50 CM71 CM72 END
CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming NEAX2000 IVS2 ISDN System Manual ND-70919 (E), Issue 1.0 Page 127 Figure 3-3 shows an example of the programming for verification of connection. Figure 3-3 Verification of Connection STATION TRK No. 000 TRK RT No. 00 TRK No. 200 TRK RT No. 20 TRK No. 100 TRK RT No. 10 VIRTUAL TRUNK (HOME-SIDE) VIRTUAL TRUNK (MATE-SIDE) CCHISDN TRUNK (BRT/DTI/PRT) TRK No. 001 TRK RT No. 01 TRK No. 201 TRK RT No. 21 TRK No. 101 TRK RT No. 11 VIRTUAL TRUNK (HOME-SIDE) VIRTUAL TRUNK (MATE-SIDE) ISDN TRUNK (BRT/DTI/PRT) ISDN SUBSCRIBER No. (972) 555-7800 ISDN SUBSCRIBER No. (972) 555-7801 STATIONTRK No. 000 TRK RT No. 00 TRK No. 200 TRK RT No. 20 TRK No. 100 TRK RT No. 10 CCHISDN TRUNK (BRT/DTI/PRT) TRK No. 001 TRK RT No. 01 TRK No. 201 TRK RT No. 21 TRK No. 101 TRK RT No. 11 VIRTUAL TRUNK (HOME-SIDE) VIRTUAL TRUNK (MATE-SIDE) ISDN TRUNK (BRT/DTI/PRT) ISDN NETWORK ISDN NETWORK ISDN SUBSCRIBER No. (972) 555-6700 ISDN SUBSCRIBER No. (972) 555-6701 PBX-B PBX-A VIRTUAL TRUNK (MATE-SIDE) VIRTUAL TRUNK (HOME-SIDE) FOR COMMON SIGNALING CHANNEL FOR VOICE CHANNEL
NEAX2000 IVS2 ISDN System ManualPage 128 ND-70919 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming Programming example for PBX A shown in Figure 3-3. CM35 YYY=152 (1) 20: Mate-Side trunk route number for common signaling channel (2) 0: Provide Verification of Connection. (1) 21: Mate-Side trunk route number for voice channel (2) 0: Provide Verification of Connection. CM50 YY=06 (1) 200: Mate-Side trunk number for common signaling channel (2) 9725556700: ISDN subscriber number of ISDN line used for common sig- naling channel (1) 201: Mate-Side trunk number for voice channel (2) 9725556701: ISDN subscriber number of ISDN line used for voice channel CM35 YY=40 (1) 20: Mate-Side trunk route number for common signaling channel (2) 00: Abbreviated Code for terminating number of the opposite office (1) 21: Mate-Side trunk route number for voice channel (2) 01: Abbreviated Code for terminating number of the opposite office CM71 (1) 66: Memory slot allocation for terminating number of opposite office (2) 000002: First memory slot number=000 + number of memory slot allocated=2 CM72 Y=0 (1) 000: Memory slot number (2) 0,9725557800: ISDN access code=0 + opposite office’s ISDN subscriber number used for common signaling channel=9725557800 (1) 001: Memory slot number (2) 0,9725557801: ISDN access code=0 + opposite office’s ISDN subscriber number used for voice channel=9725557801
CHAPTER 3 SYSTEM DATA PROGRAMMING Event Based CCIS Programming NEAX2000 IVS2 ISDN System Manual ND-70919 (E), Issue 1.0 Page 129 Programming example for PBX B shown in Figure 3-3. CM35 YYY=152 (1) 20: Mate-Side trunk route number for common signaling channel (2) 0: Provide Verification of Connection. (1) 21: Mate-Side trunk route number for voice channel (2) 0: Provide Verification of Connection. CM50 YY=06 (1) 200: Mate-Side trunk number for common signaling channel (2) 9725557800: ISDN subscriber number of ISDN line used for common sig- naling channel (1) 201: Mate-Side trunk number for voice channel (2) 9725557801: ISDN subscriber number of ISDN line used for voice channel CM35 YY=40 (1) 20: Mate-Side trunk route number for common signaling channel (2) 00: Abbreviated Code for terminating number of the opposite office (1) 21: Mate-Side trunk route number for voice channel (2) 01: Abbreviated Code for terminating number of the opposite office CM71 (1) 66: Memory slot allocation for terminating number of opposite office (2) 000002: First memory slot number=000 + number of memory slot allocated=2 CM72 Y=0 (1) 000: Memory slot number (2) 0,9725556700: ISDN access code=0 + opposite office’s ISDN subscriber number used for common signaling channel=9725556700 (1) 001: Memory slot number (2) 0,9725556701: ISDN access code=0 + opposite office’s ISDN subscriber number used for voice channel=9725556701