Home > NEC > Communications System > NEC Neax 2000 Ivs Wcs System Manual

NEC Neax 2000 Ivs Wcs System Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2000 Ivs Wcs System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 232
    Add page 231 to Favourites
    image text
    Enable zoom 
    							ND-46248 (E) APPENDIX A
Pag e 20 5
Revision 2.0
APPENDIX A OPERATING PROCEDURE FOR ANNOUNCEMENT SERVICE
By dialing predetermined access code from a station or a PS (for Integrated Type)
To replay an announcement:
1. Dial the access code to replay the announcment assigned by CM20.
2. Dial the Digital Announcement Trunk Circuit Number (000 ~ 127).
3. Press the SEND button.
4. Receive a message.
5. Press END button.
To record an announcement:
1. Dial the access code to record the announcment assigned by CM20.
2. Dial the Digital Announcement Trunk Circuit Number (000 ~ 127).
3. Press the SEND button.
4. Receive three (3) seconds of service set tone.
5. Record a message. 
Note
6. Press END button.
To delete an announcement:
1. Dial the access code to delete the announcment assigned by CM20.
2. Dial the Digital Announcement Trunk Circuit Number (000 ~ 127).
3. Press the SEND button.
4. Receive three (3) seconds of service set tone.
5. Press END button.
Note:The recording of an announcement is limited to 60 seconds.
    Add page 232 to Favourites
    image text
    Enable zoom 
    							APPENDIX A ND-46248 (E)
Pag e 20 6
Revision 2.0
OPERATING PROCEDURE FOR ANNOUNCEMENT SERVICE
By dialing “1”, “2”, “3” from a PS (for the Integrated Type and the Adjunct Type)
To replay an announcement:
1. Dial “2”.
2. Dial the Digital Announcement Trunk Circuit Number (000 ~ 127).
3. Press the SEND button.
4. Receive a message.
5. Press END button.
To record an announcement:
1. Dial “1”.
2. Dial the Digital Announcement Trunk Circuit Number (000 ~ 127).
3. Press the SEND button.
4. Receive a service set tone.
5. Record a message. 
Note
6. Press END button.
To delete an announcement:
1. Dial “3”.
2. Dial the Digital Announcement Trunk Circuit Number (000 ~ 127).
3. Press the SEND button.
4. Receive a service set tone.
5. Press END button.
Note:The recording of an announcement is limited to 60 seconds.
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2000 Ivs Wcs System Manual