Konica Minolta magicolor 2590MF User Manual
Have a look at the manual Konica Minolta magicolor 2590MF User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 76
Loading Media 62
3Remove the lid from Tray 2.
4Press down the media pressure
plate to lock it into place.
5Load the paper face up in the
tyay.
Do not load above the
100% line. Up to 500
sheets (80 g/m
2 [22 lb]) of
plain paper can be
loaded into the tray at
one time.
Face up
100%
75
50
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37249/w64_Konica_Minolta_magicolor_2590MF-75.png "Page 76
Loading Media 62
3Remove the lid from Tray 2.
4Press down the media pressure
plate to lock it into place.
5Load the paper face up in the
tyay.
Do not load above the
100% line. Up to 500
sheets (80 g/m
2 [22 lb]) of
plain paper can be
loaded into the tray at
one time.
Face up
100%
75
50
Downloaded From ManualsPrinter.com Manuals")
Loading Media 57 10Carefully close the engine cover. Downloaded From ManualsPrinter.com Manuals
Loading Media 58 11Carefully close the scanner unit. Before printing on media other than envelopes, be sure to move the fuser separator levers on the fuser unit to their original positions. Downloaded From ManualsPrinter.com Manuals
Loading Media 59 Loading Labels/Postcard/Thick Stock/Transparency/ Glossy media 1Remove the lid from Tray 1. 2Slide the media guides to pro- vide more space between them. Downloaded From ManualsPrinter.com Manuals
Loading Media 60 3Load the media face up in the tray. Up to 50 sheets can be loaded into the tray at one time. 4Slide the media guides against the edges of the media. 5Reattach the lid. Face up Downloaded From ManualsPrinter.com Manuals
Loading Media 61 Tray 2 Only plain paper can be loaded in Tray 2. Loading Plain Paper 1Pull out Tray 2 as far as possi- ble. 2Lift up Tray 2 to remove it. Downloaded From ManualsPrinter.com Manuals
Loading Media 62 3Remove the lid from Tray 2. 4Press down the media pressure plate to lock it into place. 5Load the paper face up in the tyay. Do not load above the 100% line. Up to 500 sheets (80 g/m 2 [22 lb]) of plain paper can be loaded into the tray at one time. Face up 100% 75 50 Downloaded From ManualsPrinter.com Manuals
Loading Media 63 6Reattach the lid to Tray 2. 7Reinsert Tray 2 into the machine. Downloaded From ManualsPrinter.com Manuals
About Duplex Printing 64 About Duplex Printing You should verify that the duplex option is physically installed on the machine to successfully duplex the job. Check your application to determine how to set your margins for duplex printing. Note Only plain paper are 60–90 g/m2 (16–24 lb bond) can be autoduplexed. See “Specifications” on page 40. Duplexing envelopes, labels, transparencies postcards, or glossy media is not supported. The following Double-Sided/Booklet settings are available. With duplexing, the back side is printed first, and then the front side is printed. Double-Sided If “Short Edge Binding” is selected, the pages will be laid out to flip at the top. If “Long Edge Binding” is selected, the pages will be laid out to flip at the sides. 1 3 1 21 111 12 3 Downloaded From ManualsPrinter.com Manuals
About Duplex Printing 65 Booklet If “Left Binding” is selected, the pages can be folded as a left-bound booklet. If “Right Binding” is selected, the pages can be folded as a right-bound booklet.1 12 3 3 3 1 12 Downloaded From ManualsPrinter.com Manuals
Output Bin 66 Output Bin All printed media is output to the face-down output bin. This tray has a capac- ity of approximately 100 sheets (A4/Letter) of 80 g/m2 (22 lb) media. If the media is stacked too high in the output bin, your machine may experience media misfeeds, excessive media curl, or static buildup. Remove transparencies as soon as possible from the output bin to avoid static buildup. The output bin can be adjusted to two angles, as shown in the illustra- tion at the right. Press and hold in the button on the right side of the output bin to lower the bin to the horizontal position. Downloaded From ManualsPrinter.com Manuals