HP Color LaserJet CM1017 User Manual

							C Specifications
This section contains information about MFP specifications.
●
Multifunction peripheral (MFP) specifications
ENWW227
 
						

							Multifunction peripheral (MFP) specifications
Table C-1  Physical Specifications
SpecificationsHP Color LaserJet CM1015 MFPHP Color LaserJet CM1017
MFP
Device weight (without cartridges)19.4 kg (42.75 lb)19.6 kg (43.2 lb)
Device weight, including 4
cartridges22 kg (48.5 lb)22.2 kg (48.9 lb)
Device height, desktop to top of
fully tilted display1525 mm (20.7 in)540 mm (21.3 in)
Device height, desktop to top of
scanner cover with display folded
down490 mm (19.3 in)490 mm (19.3 in)
Device height, desktop to top edge
of open scanner lid750 mm (29.55 in)750 mm (29.55 in)
Depth from front of removable face
up output tray to the back of the
main input tray, letter paper (input
tray extended)508 mm (20.0 in)508 mm (20.0 in)
Depth, from front of removable face
up output tray to back of main input
tray, legal paper (input tray
extended)563 mm (22.2 in)563 mm (22.2 in)
Depth, from front of fully extended
open input tray to back of device790 mm (31.1 in)790 mm (31.1 in)
Device width at the scanner437 mm (17.25 in)437 mm (17.25 in)
1Only dimensional difference between HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP.
Table C-2  Supplies specifications
Print-cartridge life (based on approximately 5% coverage) Black: 2,500 pages
Yellow, cyan, and magenta: 2,000 pages each
Table C-3  Electrical specifications
Item110-Volt models220-Volt models
Power requirements1110-127V (+/-10%)
50/60 Hz (+/- 2 Hz)220-240V (+/-10%)
50/60 Hz (+/- 2 Hz)
Rated current4.0 Amps 2.5 Amps
228 Appendix C   Specifications ENWW
 
						

							
Table C-4  Power consumption (average, in watts)1
Product
modelPrinting (Color)2Printing (Black and
White)2Copying2Ready2Power SaveOff
HP Color
LaserJet
CM1015 MFP200 W190 W150 W18 W18 W0 W
HP Color
LaserJet
CM1017 MFP200 W190 W150 W18 W18 W0 W
1Values subject to change, see http://www.hp.com/support/cljCM1015_CM1017  for current information.2Power reported is highest values measured for color and  monochrome printing/copying using all standard voltages.3Default time from Ready Mode to Power Save = 0 minutes.4Recovery time from Power Save to start of printing = 14 seconds5Maximum heat dissipation for all models in Ready Mode = 62 BTU/Hour6HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP speed is 8 PPM Letter and A4 size.
WARNING!Power requirements are based on the country/region where the MFP is sold. Do
not convert operating voltages. This can damage the MFP and void the product warranty.
Table C-5   Environmental specifications
Recommended1Operating1Storage1
(MFP and print cartridge)
Temperature20° to 27°C (68° to 81°F)15° to 32.5°C (59° to 90.5°F)-20° to 40°C (-4° to 104°F)
Relative humidity20% to 70%10% to 80%95% or less
1Values are subject to change. See http://www.hp.com/support/cljCM1015_CM1017  for current information.
Table C-6  Acoustic emissions1
Sound Power LevelDeclared Per ISO 92961
Printing/Copying (8 PPM)2
Ready
LWAd = 5.8 Bels (A) [58 dB (A)]
Inaudible
Sound Pressure Level (SPL)-Bystander PositionDeclared Per ISO 92961
Printing/Copying (8 PPM)2
Ready
LpAm = 46 dB(A)
Inaudible
1Values are subject to change. See http://www.hp.com/support/cljCM1015_CM1017  for current information.2Configuration tested: HP Color LaserJet CM1017 MFP, continuous monochrome printing on A4 paper at 8 PPM.3HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP speed is 8 PPM Letter and A4 size.
Table C-7  Paper and print media support specifications table
CategorySpecifications
Acid content5.5 pH to 8.0 pH
Caliper 0.094 to 0.18 mm (3.0 to 7.0 mils)
ENWW Multifunction peripheral (MFP) specifications 229
 
						

							CategorySpecifications
Curl in reamFlat within 5 mm (0.2 inch)
Cut-edge conditionsCut with sharp blades with no visible fray
Fusing compatibilityMust not scorch, melt, offset, or release hazardous emissions
when heated to 210°C (410°F) for 0.1 second
GrainLong Grain
Moisture content4% to 6% by weight
Smoothness 100 to 250 Sheffield
For complete print media specifications for all HP LaserJet Printers, see the HP LaserJet PrinterFamily
Print Media Guide. To download the guide in PDF format, go to 
http://www.hp.com/support/
ljpaperguide.
Table C-7  Paper and print media support specifications table (continued)
230 Appendix C   Specifications ENWW
 
						

							D Regulatory information
This section contains the following information:
●
Introduction
●
FCC regulations
●
Environmental Product Stewardship program
●
Declaration of conformity
●
Country/region-specific safety statements
ENWW231
 
						

							Introduction
This section contains the following regulatory information:
●
FCC regulations
●
Environmental Product Stewardship program
●
Service and support
●
Declaration of conformity
●
Laser safety statement
●
Canadian DOC statement
●
Korean EMI statement
●
VCCI statement (Japan)
●
Finnish laser statement
232 Appendix D   Regulatory information ENWW
 
						

							FCC regulations
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy. If this equipment is not installed and used in accordance with the instructions, it can
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation; the presence of interference can be determined by turning the
equipment off and on. If this equipment does cause harmful interference to radio or television
communications, the user is encouraged to try to correct the interference by one or more of the following
measures:
●Reorient or relocate the receiving antenna.
●Increase distance between equipment and receiver.
●Connect equipment to an outlet on a circuit different from that to which the receiver is located.
●Consult your dealer or an experienced radio/television technician.
NOTEAny changes or modifications to the MFP that are not expressly approved by HP could
void the user’s authority to operate this equipment.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC
rules.
ENWWFCC regulations 233
 
						

							Environmental Product Stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound
manner. This product has been designed with several attributes to minimize impacts on our environment.
Ozone production
This product generates no appreciable ozone gas (O3).
Power consumption
Power usage drops significantly while in sleep mode, which saves natural resources and saves money
without affecting the high performance of this product. This product qualifies for ENERGY STAR®
(Version 3.0), which is a voluntary program to encourage the development of energy-efficient office
products.
ENERGY STAR® and the ENERGY STAR mark are U.S. registered marks. As an ENERGY STAR®
partner, Hewlett-Packard Company has determined that this product meets ENERGY STAR®
Guidelines for energy efficiency. For more information, see 
http://www.energystar.gov/.
Paper use
This products duplex feature (two-sided printing); see 
Print on both sides of the paper and N-up printing
[multiple pages printed on one page] capability can reduce paper usage and the resulting demands on
natural resources.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to
identify plastics for recycling purposes at the end of the product’s life.
HP LaserJet printing supplies
It is easy to return and recycle your empty HP LaserJet print cartridges—free of charge—with HP Planet
Partners. HP is committed to providing inventive, high-quality products and services that are
environmentally sound, from product design and manufacturing to distribution, operation and recycling
processes. We ensure your returned HP LaserJet print cartridges are recycled properly, processing
them to recover valuable plastics and metals for new products and diverting millions of tons of waste
from landfills. Since this cartridge is being recycled and used in new materials, it will not be returned to
you. Your empty HP LaserJet print cartridges are recycled responsibly when you participate in the
HP Planet Partners program. Thank you for being environmentally responsible!
In many countries/regions, this products printing supplies (for example, print cartridge) can be returned
to HP through the HP Printing Supplies Returns and Recycling Program. An easy-to-use and free
takeback program is available in over 35 countries/regions. Multi-lingual program information and
instructions are included in every new HP LaserJet print cartridge and supplies package.
234 Appendix D   Regulatory information ENWW
 
						

							HP Printing Supplies Returns and Recycling Program Information
Since 1992, HP has offered HP LaserJet supplies return and recycling free of charge. In 2004, HP Planet
Partners for LaserJet Supplies was available in 85% of the world market where HP LaserJet supplies
are sold. Postage-paid and pre-addressed labels are included within the instruction guide in most
HP LaserJet print cartridge boxes. Labels and bulk boxes are also available through the Web site:
http://www.hp.com/recycle.
Use the label to return empty, original HP LaserJet cartridges only. Please do not use this label for, non-
HP cartridges, refilled or remanufactured cartridges or warranty returns. Printing supplies or other
objects inadvertently sent to the HP Planet Partners program cannot be returned.
More than 10 million HP LaserJet print cartridges were recycled globally in 2004 through the HP Planet
Partners supplies recycling program. This record number represents 26 million pounds of print cartridge
materials diverted from landfills. Worldwide, in 2004, HP recycled an average of 59% of the print
cartridge by weight consisting primarily of plastic and metals. Plastics and metals are used to make new
products such as HP products, plastic trays and spools. The remaining materials are disposed of in an
environmentally responsible manner.
U.S. returns
For a more environmentally responsible return of used cartridges and supplies, HP encourages the use
of bulk returns. Simply bundle two or more cartridges together and use the single, pre-paid, pre-
addressed UPS label that is supplied in the package. For more information in the U.S., call
1-800-340-2445 or visit the HP Printing Supplies Returns and Recycling Program Web site at:
http://www.hp.com/go/recycle.
Non-U.S. returns
Non-U.S. customers should visit the 
http://www.hp.com/go/recycle Web site for further information
regarding availability of the HP Supplies Returns and Recycling program.
Paper
This product is capable of using recycled papers, when the paper meets the guidelines outlined in
the HP LaserJet Printer Family Print Media Guide. Go to 
http://www.hp.com/support/ljpaperguide to
download this guide in PDF format. This product is suitable for the use of recycled paper according to
EN12281:2002.
Material restrictions
This product does not contain added mercury.
This product does not contain batteries.
For recycling information, you can contact 
http://www.hp.com/go/recycle or contact your local authorities
or the Electronics Industry Alliance at 
http://www.eiae.org.
ENWW Environmental Product Stewardship program 235
 
						

							Disposal of waste equipment by users in private households in the
European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with
your other household waste. Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment. For more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste disposal service or the shop where
you purchased the product.
Material safety data sheet
Material Safety Data Sheets (MSDS) for supplies containing chemical substances, such as toner, can
be obtained by contacting the HP Web site at 
http://www.hp.com/go/msds or http://www.hp.com/hpinfo/
community/environment/productinfo/safety.
Extended warranty
HP Care Pack provides coverage for the HP hardware product and all HP supplied internal components,
excluding consumable items. The hardware maintenance covers a specified period of time from date of
the HP product purchase. The customer can either purchase HP Care Pack within the standard HP
product warranty period, or purchase a post-warranty Care Pack if the standard warranty has expired.
For more information, contact the HP Customer Care Service and HP Customer Support group.
Spare parts and consumable supplies for this product will be available for at least five years after
production has stopped.
For more information
To obtain information about these environmental topics:
●Product environmental profile sheet for this and many related HP products
●HPs commitment to the environment
●HPs environmental management system
●HPs end-of-life product return and recycling program
●MSDS
See: 
http://www.hp.com/go/environment or http://www.hp.com/hpinfo/community/environment/
productinfo/safety.
236 Appendix D   Regulatory information ENWW